• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.18-22
• /
• 2001

Effects of cationic surfactants old the wetting behavior of the DMDHEU treated cotton fibers were investigated using a technique based on the Wilhelmy principle. The results indicated that Interactions between the fiber and water ill the interface make contributions to wettability of the cotton fiber surface because of reorientation of polar groups at the interface. The effects of types and concentration of cationic surfactant on the wettability of both control and durable press(DP) finished cotton fiber are discussed. Below and near the critical micelle concentration(cmc), the adsorption of hexadecyltrimethylammoniumbromide(HTAB) on the control fiber makes the fiber surface more hydrophobic. Near and above the cmc of octadecyltrimethylammouniumbromide(OTAB) , the decrease in advancing contact angles indicates that the control cotton surface became hydrophilic. By the adsorption of both HTAB and OTAB onto the fiber surface, the hydrophobicity of the DP finished fiber surface became mere hydrophilic.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1576-1581
• /
• 2004

An experimental study has been carried out to investigate the frosting behaviors of thermally conductive plastic(PBT based resin) resin by comparing with those of aluminum and some plastic(PTFE based resin) test specimens. It is found that the frosting behavior of plastic specimens with 1 mm thickness show similar trend with aluminum except PTFE. The properties of frost formed on the specimens are affected by both thermal conductivityand surface characteristics (hydrophilic/hydrophobic) of the materials. It can be said that the heat and mass transfer rate of plastic materials are almost equivalent with those of aluminum.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3735-3739
• /
• 2010

Branched oligopeptides prepared by coupling a very hydrophobic aspartic diamino acid ethyl ester such as Asp $(LeuEt)_2$, $Asp(IleEt)_2$ and $Asp(PheEt)_2$ to glycine or glycylphenylalanine were grafted to the cyclotriphosphazene backbone bearing an equimolar hydrophilic poly(ethylene glycol) (PEG). The properties of the resultant amphiphiles were examined in comparison with those of the linear oligopeptide analogues previously reported. All cyclic phosphazene trimers grafted with the branched tetra- and pentapeptides displayed a normal trend of thermosensitivity depending on their hydrophilic to hydrophobic balance, but the stability and particle size of their micelles were found to be greatly dependent on the fine structure of the branched oligopeptides grafted. The trimers bearing branched tetrapeptides with a low hydrophobicity were found to form unstable micelles initially, which reassemble into thermodynamically more stable polymersomes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.103-104
• /
• 2007

Nanometer-scaled polymer beads, such as polystyrene beads, were used as nanometer fabrication materials due to their some advantages such as self-assembled monolayer, nanometer scaled size and excellent compatibility with silicon based devices. Thus, the investigation on these properties of polymer beads was required. It is difficult to control the array of polystyrene beads on silicon substrate. In this study, we investigated the condition of selective array of polystyrene beads on nanometer-scaled hydrophilic surface which was obtained by APS coating. A tilting method was used to array the polystyrene beads selectively on the substrate. The polystyrene beads could be arrayed selectively by this method. From these results, we verified that there are possibilities to fabricate unique tools for the nanometer-scaled electrical devices.

• Textile Coloration and Finishing
• /
• v.4 no.4
• /
• pp.110-116
• /
• 1992

For the modification of PET surface, Perfluoropropene and Methyl alcohol were LT-plasma polymerized on the PET fabrics as thin films by means of 13.56 MHz radio frequency generator. The surface properties of PET fabrics were modified from hydrophobic to hydrophilic by application of the postplasma reaction of thin films. The evidence of the modification was identified by observation of the presence of hydroxy group in IR spectrum and the evaluation of degree of hydrophilicity was performed by measuring frictional static voltage of PET fabric with cotton fabric. For the case of modification by PFP, the result performed at the condition of 25 W, 70 m torr has shown to be effective, and for MeOH, result performed at the condition of 25 W, 100 m torr effective. The effect of hydrophilic surface modification of MeOH plasma polymer was superior to that of PFP-plasma polymer.

• Membrane Journal
• /
• v.27 no.1
• /
• pp.60-67
• /
• 2017

Recently, the economic, social and environmental significance of the water industry is increasing significantly due to rapid global urbanization, population growth, and imbalance in demand and supply of water resulted by climate change. The type of these water industries are all different and they can be distinguished by the kinds of membranes used. Mainly, polymer materials that have excellent physical and chemical stability are used, but recently various methods of assigning hydrophilicity have been introduced due to their hydrophobic properties. In this study, hydrophilic polymers of four types were introduced into a commercially available hollow support to assign hydrophilicity. Furthermore, the morphology of the coated hollow support through FE-SEM was confirmed as well. Also the contact angle was measured to examine the degree of hydrophilicity of the coated hollow support with each polymer. Finally,.effect of different time on water permeability as well as the relationship between water permeability and hydrophilic polymers were investigated. As a result, the coating with 1 wt% of pluronic has good hydrophilicity degree, and shows the excellent water permeability without blocking the pore of the hollow fiber. Therefore, it can be concluded that the hydrophilic coating using pluronic polymer is most suitable as the water treatment.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.71-73
• /
• 2008

The development of polymer/inorganic nanocomposites has attracted a great deal of interest due to the improved hybrid properties derived from the two different components. Various nanoscale fillers have been used to enhance polymer mechanical and thermal properties, such as toughness, stiffness, and heat resistance. The effects of the filler on the final properties of the nanocomposites are highly dependent on the filler shape, particle size, aggregate size, surface characteristics, polymer/inorganic interactions, and degree of dispersion. In this paper, we describe the influence of different $CaCO_3$ dispersion methods on the thermal properties of polyethylene terephthalate (PET)/$CaCO_3$ composites: i.e., the adsorption of $CaCO_3$ on the modified PET surface, and the hydrophobic modification of the hydrophilic $CaCO_3$ surface. We prepared PET/$CaCO_3$ nanocomposites using a twin-screw extruder, and investigated their thermal properties and morphology.

• Journal of Adhesion and Interface
• /
• v.19 no.4
• /
• pp.145-153
• /
• 2018

In this study, adhesion promoters with acrylate and carboxylic acid moiety were synthesized from malenized polybutadiene and 2-hydroxyethyl acrylate for producing adhesive film with low water absorption and high adhesion. The surface properties, adhesion strength, mechanical properties and water absorption of adhesive films were characterized according to the amount of acrylate and carboxylic acid in the synthesized adhesion promoters. As the carboxylic acid in the adhesion promoters increased, the adhesion strength showed a tendency to increase and the mechanical properties also improved compared to the commercial adhesion promoter. The compatibility of adhesion promoters improved remarkably due to the presence of polybutadiene (hydrophobic nature), maleic anhydride (hydrophilic nature) and carboxylic acid (hydrophilic nature).

• YAKHAK HOEJI
• /
• v.60 no.1
• /
• pp.36-45
• /
• 2016

This study was aimed to enhance the percutaneous absorption of tizanidine hydrochloride (TZ) across Strat-M$^{TM}$ artificial membrane and excised hairless mouse skin using various vehicles and chemical permeation enhancers. Solubility studies were performed using hydrophilic and lipophilic vehicles. To initially evaluate vehicle effects on skin permeation, Strat-M$^{TM}$ membrane was adopted using Franz-type diffusion cells loaded with 0.4 mg donor dose. Effects of fatty acids on the permeation of TZ from PG and PGMC were compared, and the effects of various hydrophilic vehicles in the presence of linoleic acid were studied using excised hairless mouse skin specimens. The mean solubility (mg/ml) of TZ in hydrophilic vehicles was higher: water > PG > DMSO > ethanol > PEG 200 > NMP > PEG 300 > PEG 400 > DGME, and solubilities in lipophilic vehicles such as PGMC, PGMC, IPM, Captex 200 and Captex 300 were much less than 1.0 mg/ml. Permeation rates through StratTM membrane from pure vehicles were in the rank order: PGMC ${\geq}$ LBF > DMSO ${\geq}$ NMP ${\geq}$ PGML ${\geq}$ PG ${\geq}$ PEG 200 ${\geq}$ DGME ${\geq}$ EtOH. However, permeation rates of TZ through hairless mouse skin from pure vehicles were very low, although PG showed the highest flux ($1.66{\pm}0.28{\mu}g/cm^2{\cdot}hr$). Therefore, PG was selected in further studies. Addition of enhancers (3 v/v%) into PG markedly increased the flux (${\mu}g/cm^2{\cdot}hr$): oleyl alcohol ($14.9{\pm}3.1$) ${\geq}$ oleic acid ($14.5{\pm}1.6$) ${\geq}$ linoleic acid ($13.7{\pm}1.3$) > capric acid ($4.4{\pm}0.6$) > caprylic acid ($2.1{\pm}0.4$). Among hydrophilic vehicles with linoleic acid, PG and DMSO revealed relatively higher permeation for TZ. Increase of donor dose in PG resulted in dose-dependent permeation fluxes. These results suggest that permeation properties of TZ from nonaqueous solutions are markedly different between Strat-$M^{TM}$ membrane and excised hairless mouse skin, and transdermal delivery of TZ would be feasible with a combination of PG and enhancers.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.116-120
• /
• 2005

In this study, composites with polypropylene(PP) and Jute fiber were prepared by compression molding technique. Generally, hydrophilic jute fibers do not adhere well to PP, which is hydrophobic. Maleic anhydride grafted polypropylene(MAPP) had been widely used as a coupling agent to improve the bonding between ligno-cellulosic fibers and PP. The coupling agent improved the tensile and flexural properties when the mechanical properties were tested by using a UTM. The mechanical properties of natural fiber composites(NFCs) by modified thermoplastics were higher than those of NFCs by unmodified thermoplastics. Fracture surfaces of the composites and the fiber orientations were investigated by scanning electron microscopy. The mechanical performance of NFCs by modified thermoplastics appeared to be improved by the enhanced interface adhesion between the fiber and the matrix.