• Title/Summary/Keyword: hydrolysis conditions

Search Result 654, Processing Time 0.025 seconds

Production of Levulinic Acid from Marine Algae Codium fragile Using Acid-Hydrolysis and Response Surface Methodology (산가수분해법과 반응표면분석법을 이용한 해조류 청각으로부터 레불린산의 생산)

  • Jeong, Gwi-Taek;Park, Don-Hee
    • KSBB Journal
    • /
    • v.26 no.4
    • /
    • pp.341-346
    • /
    • 2011
  • This work is focused on the possibility of marine biomass Codium fragile as renewable resources for production of levulinic acid. In an effort to optimize the reaction conditions of levulinic acid production from Codium fragile, response surface methodology was applied. A total of 18 individual experiments were designed to investigate the effect of reaction temperature, catalyst amount, and reaction time. As a result, 4.26 g/L levulinic acid from Codium fragile was produced in the condition of $160.7^{\circ}C$ of reaction temperature, 3.9% of sulfuric acid, and 39.1 min of reaction time. This result will provide the useful information for chemical production from marine resource.

Dilute Acid Pretreatment of Woody Hemicellulose Using a Percolation Process (Percolation 공정에 의한 목질계 헤미셀룰로오스의 묽은산 전처리)

  • 염동문;김성배;박순철
    • KSBB Journal
    • /
    • v.13 no.3
    • /
    • pp.312-319
    • /
    • 1998
  • The dilute-acid pretreatment/hydrolysis of hemicellulose in oak wood using a percolation reactor was investigated. The experimental conditions ranged 160∼180$^{\circ}C$ and 0.05∼0.2 wt.% sulfuric acid. XMG(xylan+mannan+galactan) recovery was higher when sulfuric acid was used as leaching solvent than water. Also it was important for high XMG recovery to keep leaching temperature higher after reaction. XMG recovery was decreased as the size of wood chips was increased. At an optimum condition (reaction condition= 170$^{\circ}C$, 0.1% sulfuric acid, 1ml/min, 10min, leaching condition=0.1% sulfuric acid, 2mL/min, 20 min), the product yield and the sugar concentration were about 92% and 2.7%, respectively.

  • PDF

주정증류 폐액을 이용한 Actinobacillus sp. EL-9로부터 Poly-$\beta$-Hydroxybutyrate의 생산 및 폐약의 처리

  • 손홍주;이상준
    • Microbiology and Biotechnology Letters
    • /
    • v.24 no.3
    • /
    • pp.352-356
    • /
    • 1996
  • Alcoholic distillery wastes are utilized as dual purposes to produce PHB in lower production cost and to reduce the amount of waste to be treated. In this study, various attempts were made to increase PHB production under various conditions by Actinobacillus sp. EL-9 in a shaker culture. The addition of glucose, NH$_{4}$NO$_{3}$ to alcoholic distillery wastes slightly promoted cell mass and PHB production. Enzyme hydrolysis of alcoholic distillery wastes increased the production of PHB than that of untreated waste and acid hydrolysis treatment. The PHB weight in alcoholic distillery wastes was 1.91 g/l. Fermentation process of PHB production reduced the amount of COD value up to 54%, which reduced organic loading rate and capacity of activated sludge system.

  • PDF

Doxyclycline and Ciprofloxacin Treatment of Silk to Produce Novel Infection Resistance Biomaterials

  • Park, Hyung-Min;Martin Bide;Matthew Phaneuf;William Quist;Frank Logerfo
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 2003.10a
    • /
    • pp.81-82
    • /
    • 2003
  • Two antibiotics, doxycycline (doxy) and ciprofloxacin (cipro) were applied under a variety of conditions to silk, and to silk that had previously been hydrolyzed. FTIR-ATR analyses indicated that the drastic increase in sorption of antibiotics by hydrolyzed silk was attributable to both chemical and conformational changes that occurred on hydrolysis. A high sorption of doxy by hydrolyzed silk did not necessarily give a more infection-resistant material as determined by a zone of inhibition test. Conversely, the same hydrolysis considerably increased both sorption of cipro and zone of inhibition of cipro-treated silk dyed at 65$^{\circ}C$ and 85$^{\circ}C$.

  • PDF

A Study on the Physical Properties of Silk Fabrics Treated with Polymethylhydrosiloxane and Polydimethylsiloxane (폴리메틸 히드로 실록산과 폴리디메틸 실록산으로 처리한 견섬유의 물성에 관한 연구)

  • 장병호;신광호;이병학
    • Textile Coloration and Finishing
    • /
    • v.5 no.1
    • /
    • pp.1-9
    • /
    • 1993
  • The polymethylhydrosiloxane(PMHS) was synthesized by the co-hydrolysis of methyldichlorophydrosilane and ethyl ether, also polydimethylsiloxane(PDMS) was synthesized by the hydrolysis of dimethyl dichlorosilane and ethyl ether. The silk fabrics were treated with PMHS and PDMS in order to improve the water repellency and the wrinkle recovery. Also the effect of PMHS concentration, PDMS concentration and cure temperature on the physical properties of silk fabrics were studied. The maximum water repellency and maximum wrinkle recovery were obtained from the fabrics treated under the conditions 5%-PMHS and PDMS at 16$0^{\circ}C$, and 3%-PMHD and PDMS at 16$0^{\circ}C$, respectively. The tensile strength, the breaking elongation, the reflection and the bending properties of silk fabrics were not degraded severely by the treatment of PMHS or PDMS.

  • PDF

Studies on the Preparation and Utilization of Starch -II. Hydrolysis of Starch by Bacterial Amylases (전분의 제조와 가공이용에 관한 연구 -제 2 보 세균성 아밀라아제에 의한 전분의 가수분해-)

  • Lee, Su-Rae
    • Applied Biological Chemistry
    • /
    • v.13 no.3
    • /
    • pp.181-186
    • /
    • 1970
  • 1) Conditions for the hydrolysis of starch by bacterial liquefying amylase (BLA), saccharifying amylase (BSA) and isoamylase were investigated. Out of four syrups prepared by different combinations of these enzymes, those made by BLA followed by BSA and/or isoamylase were comparable to sucrose syrup in canning of orange segments. 2) Two branched maltooligosaccharides were isolated from the hydrolyzate of starch by BLA and BSA, and their structures were tentatively identified as pentaose and hexaose having an ${\alpha}-1$, 6-linkage at the branching point.

  • PDF

Fabrication of Low Loss Silica Slab Waveguide by Flame Hydrolysis Deposition (FHD 공정에 의한 저손실 실리카 슬랩 도파로 형성)

  • 심재기;김태홍;신장욱;박상호;김덕준;성희경
    • Journal of the Korean Ceramic Society
    • /
    • v.37 no.6
    • /
    • pp.524-529
    • /
    • 2000
  • Silica slab wavegudie was fabricated on Si substrates by FHD for planar optical passive devices. The slab waveguide consists of lower clad and core layers, where core layer index is controlled by GeO2 addition. Doping of GeO2 in silica is difficult because of the low deposition density due to nonspherical particle generation in FHD process. Silica core particles deposited at various conditions such as flame temperature and substrate scanning were analyzed by SEM and TEM. As the flame temperature increased, the surface roughness of the core layer was decreased up to 3.6 nm after consolidation. Index difference and thickness of core of slab waveguide were 0.3%, 8$\mu\textrm{m}$ respectively. Measured optical loss at TE mode was <0.04 dB/cm at 1.3$\mu\textrm{m}$ and <0.06 dB/cm at 1.55$\mu\textrm{m}$.

  • PDF

Processing of Corbicula elatior Beverage (재첩을 이용한 음료 가공)

  • 강동수;최옥수
    • Journal of Life Science
    • /
    • v.11 no.2
    • /
    • pp.138-143
    • /
    • 2001
  • Marsh calm(Corbicular elatior)with a short-term storage in raw and a law-rate of utilization has been increasing the needs to develop new marsh calm processing products for a temporary mass treatment and long-term distribution, Therefore the processing conditions of marsh calm beverage using proteolytic enzyme hydrolysis were investigated. A partial hydrolysis at 6$0^{\circ}C$ for 1 hour after adding 3% Alcalase as more effective than a hot water extraction to develop taste compounds from the marsh calm. The result of ommission test showed that nucleotides and their related compounds were contributed in the taste of the marsh calm hydrolysates rather than free amino acids. The taste of the hydrolysates was produced by association with these compounds rather than only one compound s the hydrolystes taste differently for the control when one of these compound was omitted. The hydrolysates were fractionated to molecular weight below 500 dalton to eliminate bitter taste and to improve it flavor from the hydrolysates, 0.05% bay leaf was more effective to improve the odor than other herbs.

  • PDF

Weight Reduction Properties of PET Fabrics Treated with Electrolytic Reduction Water (전해환원수에 의한 폴리에스테르 직물의 감량가공 특성)

  • Ro Duck-Kil;Hong Young-Ki;Bae Kie-Seo
    • Textile Coloration and Finishing
    • /
    • v.17 no.5 s.84
    • /
    • pp.37-44
    • /
    • 2005
  • The electrolytic water(EW) has been used in agriculture, medical, semiconductor, and household fields. However there has been no use of EW in the textile process so far, because the application in the textile industry has been needed a large amount of EW in real process conditions. Recently, we have got electrolytic oxidation water(EOW) and electrolytic reduction water(ERW) by development of a electricity electron technology. And, the productivity of EW manufacture apparatus is arrived to large capacity. As a result, the application of EW could be possible in the textile industry. In this study, to confirm the possibility of application of EW, we scoured and hydrolyzed PET fabric using the EW. It was possible that the application of ERW for the scouring and hydrolysis of PET fabrics in the textile process.

Preparation of Glass Thin Film onto Plastic Surface by Sol-Gel Process (Sol-Gel 공정으로 Plastic표면에 Glass박막 제조에 관한 연구)

  • 양천회
    • Journal of the Korean Society of Safety
    • /
    • v.13 no.1
    • /
    • pp.85-91
    • /
    • 1998
  • Sol-gel derived silica films were prepared by dip-coating onto polymethylmethacylate with Tetraethoxysilane(TEOS) as starting materials. Film properties such as viscosity and thickness were investigated as a function of dip speed, waterprecursor ratio, sol aging time. IR spectra of the gel films prepared from TEOS at various R are given. At small values of R the absorption peaks assignable to C-H vibration in $-OC_2H_5$ groups are observed around 3000 and 1500-1300 $cm^{-1}$. These bands indicate that the -$-OC_2H_5$ groups are retained in the gel at small values of R because of incomplete hydrolysis of TEOS. Film behaviour was interpreted in terms of the dependence of hydrolysis and condensation rates on the interplay between sol pH and waterprecursor ratio. Film thickness was found to increase by approximately a factor of two as waterprecursor ratio increased from two to six. Film thickness also increased with sol prepolymerization time. Surface quality was correlated with processing conditions.

  • PDF