• Korean journal of food and cookery science
• /
• v.9 no.4
• /
• pp.293-297
• /
• 1993

This study aims to seek ways to improve frying stability of soybean oil which is widely used for deep frying while at the same time attempting to develop new frying oil and fat of high quality. Taking soybean oil as a control group, the study fried frozen potatoes with hydrogenated soybean oil with iodine value ranging from 60 to 110 for 15 hours. The test results showed that in frying stability, hydrogenated soybean oil with iodine value of 87 and 63 was superior to normal soybean oil and hydrogenated soybean oil with iodine value of 111(P<0.05). In sensory evaluation, however, no significant difference can be detected among groups(P>0.05). The correlation between physicoche-mical properties and sensory evaluation results was highest for smoke point and viscosity. This study concludes, therefore, that hydrogenated soybean oil with iodine value of 60~90 is better than normal soybean oil as deep-frying oil.

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.360-365
• /
• 1991

Effect of random interesterification on the physicochemical properties in blends of corn germ oil and fully hydrogenated soybean oil was studied. Interesterification by using 0.4% sodium methoxide at $80^{\circ}C$ was completed in 35 minutes as determined by HPLC analysis for triglyceride composition. Changes of melting point, solid fat content, crystal form, fatty acid and triglyceride composition was investigated. After the interesterification, melting point and solid fat content were decreased, and coarse and large crystals were modified to fine and uniform. Fatty acid composition was not altered but triglyceride composition was largely altered. Interesterified blends of corn germ oil and fully hydrogenated soybean oil made with 80%, 20% and 75%. 25%, respectively, had desirable characteristics of the margarine for home use.

• Journal of Nutrition and Health
• /
• v.26 no.2
• /
• pp.119-130
• /
• 1993

This study was carried out to investigate the effects of dietary lipid sources and meal frequency on growing performance and lipid metabolism in Sprague-Dawley strain male rats. The experiment was conducted in 4$\times$2 factorial arrangement with 4 sources of dietary lipid(palm oil, beef tallow, soybean oil and hydrogenated soyben oil) and 2 meal frequencies(ad-libitum or meal feeding). During the 4-week feeding period the rats were fed either ad-libitum (AL) or a single daily 3-hour meal (09 : 02-12 : 00) during the dark period. In vitro cultures were carried out to study the cholesterol synthetic activity in hte liver prepared from rats used in feeding trials. And in vitro cultures were also carried out to study the lipogenic and lipolytic activity in the liver and adipose tissues prepared from rats used in feeding trials. Present data indicated that body weight gain, feed intake and FER of AS(ad-libitum+soybean oil)and AHS(ad-libitum+hydrogenated soybean oil) group were significantly(p<0.05) higher than those of the other groups. It was found that the feed intake of MF group was much less than that of AL group. Total body weight gained by MF group was only 60% of AL group. Growing performance was not affected by dietary lipid sources. The cholesterol synthetic activity in liver tissues culture was markedly(p<0.05) increased in MF diets, especially in soybean oil group. The lipogenic activity in liver tissues culture of MP(meal feeding+palm oil) and MHS(meal feeding+hydrogenated soybean oil)group was significantly (p<0.05) higher than that of AP(ad-libitum+palm oil) group and AHS(ad-libitum+hydrogenated soybean oil) group(p<0.05). Rats fed ad-libitum+beef tallow and fed meal feeding+beef tallow showed significantly(p<0.05) higher lipogenesis than the other groups. It was apparent that the lipogenic activity in liver tissues culture was not affected by dietary lipid sources and meal frequency. Lipolytic activity in liver tissue culture was significantly(p<0.001)different with meal frequency; MF group was higher than AL group, but was not greatly affected by dietary lipid sources. In the in vitro studies with adipose tissue, MF diets increased the lipogenic activity and inhibited the lipolytic activity in adipocytes. The lipogenic activity in adipocytes was significantly (p<0.001) different with dietary lipid sources and found to be beef tallow group was the higherst, but the sources of lipid in the diet did not exert any effect on the lipolytic acitivity.

• Korean journal of food and cookery science
• /
• v.15 no.3
• /
• pp.264-271
• /
• 1999

This study was conducted to know the storage stability of Yackwa, a traditional Korean fried cookie, prepared by two different cooking methods; deep fat frying at 160$^{\circ}C$ for 8 min (DFF), and preheating Yackwa dough and then deep fat frying at 180$^{\circ}C$ for 2 min (MW/DFF). Soybean oil (SBO), hydrogenated soybean oil (HSBO) or hydrogenated palm oil (HPO) were used for frying Yackwa. Compared to Yackwa prepared by DFF, all MW/DFF Yackwa samples had low fat content and high moisture content. MW/DFF saved frying time 6 min compared with DFF. Non-hydrogenated soybean oil for frying fats was replaced with hydrogenated types of soybean oil and palm oil to improve the storage stability of Yackwa. To investigate the oxidation stability of Yackwa during the accelerated storage for 15 days at 60$^{\circ}C$, acid value, anisidine value, peroxide value and oxidation value of Yackwas were measured. Acid values of Yackwa made by MW/DFF were higher than those made by DFF through the whole storage periods, regardless of frying fats. Peroxide and anisidine values of Yackwa coated with syrup were much lower than those without syrup. MW/DFF cooking method, using hydrogenated soybean oil or hydrogenated palm oil for frying, showed lowering effects on peroxide value as well as anisidine value, resulting in improved oxidation stability of Yackwa during the storage. In sensory evaluation, the acceptability of MW/DFF Yackwa was higher than those of the commerical products. Yackwa prepared by MW/DFF cooking method using hydrogenated palm oil, showed the highest acceptability in color, taste and texture among the samples.

• Food Science of Animal Resources
• /
• v.32 no.6
• /
• pp.783-788
• /
• 2012

The aim of this study was to optimize the manufacturing condition of spreadable modified butter by RSM. Based on the central composite design, the degree of optimization was expressed as a SFC as a dependent variable (Y, %) determined by NMR with 23 experimental groups. Three independent variables were the contents of butter ($X_1$, 35-75%), the contents of grape seed oil ($X_2$, 15-35%), and the contents of hydrogenated soybean oil ($X_3$, 0-4%). As the result, SFC at $10^{\circ}C$ was ranged from 32.37 to 42.76%. In addition, the regression coefficients were calculated for SFC at $10^{\circ}C$ by RSREG. The regression model equation for the SFC was $Y=39.18-0.04X_1X_3$. Consequently, the optimal contents for manufacturing spreadable modified butter were determined as 55.18% for butter, 40.78% for grape seed oil, and 4.08% for hydrogenated soybean oil, respectively. The predicted response value for SFC at $10^{\circ}C$ was 30.20%, comparable to the actual experimental SFC value as 29.85%. Finally hardness and spreadability in reference butter and spreadable modified butter produced under the optimal conditions was measured. The hardness in spreadable modified butter was 31.80 N as compared to 69.92 N in reference butter. The spreadability in spreadable modified butter was 5.6 point as compared to reference butter. This difference may be due to the contents of solid fat by butter and hydrogenated soybean oil. This study showed that the SFC value at $10^{\circ}C$ could be a suitable indicator for the manufacturing spreadable modified butter to predict important attributes such as mouth feel, hardness and spreadability.

• Journal of Dairy Science and Biotechnology
• /
• v.26 no.2
• /
• pp.51-56
• /
• 2008

Using central composite design, we have designed optimization of the manufacturing of processed butter. And response surface analysis by least-square regression was used Statistical Analysis System(SAS). Central composite design can be achieved by response surface techniques that allow flexibility in modeling and analysis. Response surface methodology(RSM) was used to optimize hardness(%) using as independent variables; the content of butter($X_1$), ranging from 50 to 90(%), the content of soybean oil($X_2$), from 0 to 20(%), and the hydrogenated soybean oil($X_3$) from 0 to 4(%). The results on the regression coefficients calculated for overrun by response surface by least-square regression(RSREG) were followed. It was considered that the linear regression was significant(p<0.01). As for the processed butter, the regression model equation for the hardness(Y, %) to the change of an independent variable could be predicted as follow: $Y=60.88-8.92X_2-{29.3X_2}^2$. The optimal for the manufacturing of processed butter were determined at the content of butter of 88.22%, soybean oil of 6.71% and hydrogenated soybean oil of 2.36%, respectively. Optimum compositions were resulted in hardness of 65.78 N. Finally the reference sample(Butter in the morning, Seoul Dairy Co-op.) and processed butter manufacturing under the optimal conditions were compared with spreadability test. The spreadability scores result from reference sample and butter under optimal conditions was not found a significant difference.

• Applied Biological Chemistry
• /
• v.36 no.2
• /
• pp.93-98
• /
• 1993

The purpose of this study is to determine the physicochemical properties in soybean oil during the hydrogenation by addition of phosphorus compounds and sulfur compounds is increased in soybean oil, decreased oleic acid and increased linoleic acid and stearic acid contents were found. When the sulfur compounds content is increased, solid fat content is increased at $10.0^{\circ}C$ and $21.1^{\circ}C$ and gradually decreased at $33.3^{\circ}C$ and $37.8^{\circ}C$. Higher melting point in hydrogenated soybean oil is observed on addition of phosphorus compounds compared to addition of sulfur compounds. When the sulfur compounds content is increased, conditions of selective hydrogenation are observed. Lead and arsenic are detected at a concentration of 0.01 ppm in a few kinds at each step of the refining process of soybean oil.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.9
• /
• pp.1320-1327
• /
• 2010

Lipase-catalyzed interesterification of canola (CO) and fully hydrogenated soybean oil (FHSBO) at different weight ratios (70:30, 75:25, and 80:20) was performed in a batch type reactor to produce low-trans solid fats. Each reaction was conducted in the shaking water bath for various reaction times (1, 3, 6, 18 and 24 hr) at 70oC and 220 rpm using Lipozyme TLIM (20 wt% of total substrate) from Thermomyces lanuginosus. After 24 hr reaction, solid fat content (SFC) by differential scanning calorimetry (DSC), fatty acid and triacylglycerol (TAG) composition of low-trans solid fats were determined. SFC of the products was reduced when the content of canola oil in the reaction mixture was increased. Major fatty acids were stearic acid (C18:0), oleic acid (C18:1) and linoleic acid (C18:2). Trans fatty acid content in the low-trans solid fats showed less than 0.3 wt%. In the HPLC analysis, major TAG species showed LOO (linoleyl-oleoyl-oleoyl), OOO, POO/SOL, SOO, and SOS.

• Korean Journal of Food Science and Technology
• /
• v.17 no.5
• /
• pp.355-360
• /
• 1985

Soybean, hydrogenated soybean and corn oils, which were exposed to fluorescent light for different periods of time, were evaluated for sensory qualities by subjective sensory evaluation and instrumental gas chromatographic analysis. Sensory evaluation was conducted in 8 laboratories using a 10-point hedonic scale with a total of 95 panel members. The correlation coefficients between sensory scores and predicted sensory scores by gas chromatographic analysis for the 8 laboratories varied from 0.10 to 0.99. However, most laboratories had better than 0.90, which was considered excellent. The correlation coefficients between sensory scores of the 95 panel members and predicted sensory scores using the amount of 2. 4-decadienal isomers in oil determined by a gas chromatographic method for soybean, hydrogenated soybean, and corn oils, were r=0.96, r=0.97, and r=0.97, respectively. The correlation study suggests that it is possible to obtain realistic results of oil flavor qualities from the instrumental evaluation by combining improved gas chromatographic analysis, sensory evaluation, and statistical analysis for practical purposes.

• Proceedings of the Korean Nutrition Society Conference
• /
• 2003.10a
• /
• pp.142-142
• /
• 2003