본 연구에서는 ECR플라즈마 화학증착법을 이용하여 반응기내 압력의 변화에 따라 수소화된 무정형 실리콘막을 증착하고 박막내 수소의 함량과 결합구조 및 전기적 특성을 조사하였다. 일반적인 CVD에 의해 제조된 a-Si:H막은 증착속도가 증가할수록 광감도는 감소하지만 ECR플라즈마의 경우 증착속도가 증가할수록 광감도가 향상되었다. 마이크로파 출력과 사일렌/수소 희석비, 반응기내 압력등이 동일한 실험 조건에서 증착시간에 따른 막의 두께는 선형적으로 증가하고 막내에 함유된 수소의 농도는 일정하지만, 반응시간이 짧은 경우 막내에 $SiH_2$결합이 SiH결합보다 많이 형성되어 광전도도를 저하시킬 수 있다. 반응기내 압력이 증가함에 따라 박막내에 SiH결합이 증가하여 광학 에너지 갭을 줄여 광전도도를 향상시킬 수 있었으나 암전도도의 증가로 광감도는 감소하였다. 따라서 양질의 박막을 얻기 위해서는 압력이 낮고 수소기체의 양이 적은 조건에서 성장시켜야 한다.
Hydrogenated microcrystalline silicon (${\mu}c-Si:H$) films have attracted much attention as materials of the bottom-cells in Si thin film tandem photovoltaics due to their low bandgap and excellent stability against light soaking. However, in PECVD, the source gas $SiH_4$ must be highly diluted by $H_2$, which eventually results in low deposition rate. Moreover, it is known that high-rate ${\mu}c-Si:H$ growth is usually accompanied by a large number of dangling-bond (DB) defects in the resulting films, which act as recombination centers for photoexcited carriers, leading to a deterioration in the device performance. During film deposition, Si nanoparticles generated in $SiH_4$ discharges can be incorporated into films, and such incorporation may have effects on film properties depending on the size, structure, and volume fraction of nanoparticles incorporated into films. Here we report experimental results on the effects of nonoparticles incorporation at the different substrate temperature studied using a multi-hollow discharge plasma CVD method in which such incorporation can be significantly suppressed in upstream region by setting the gas flow velocity high enough to drive nanoparticles toward the downstream region. All experiments were performed with the multi-hollow discharge plasma CVD reactor at RT, 100, and $250^{\circ}C$, respectively. The gas flow rate ratio of $SiH_4$ to $H_2$ was 0.997. The total gas pressure P was kept at 2 Torr. The discharge frequency and power were 60 MHz, 180 W, respectively. Crystallinity Xc of resulting films was evaluated using Raman spectra. The defect densities of the films were measured with electron spin resonance (ESR). The defect density of fims deposited in the downstream region (with nonoparticles) is higher defect density than that in the upstream region (without nanoparticles) at low substrate temperature of RT and $100^{\circ}C$. This result indicates that nanoparticle incorporation can change considerably their film properties depending on the substrate temperature.
ECR-PECVD 방법으로 ECR 플라즈마 소스 power, $CH_4/H_2$ 가스 혼합비와 유량, 증착시간 및 기판 bias 전압을 변화시켜 가면서 수소가 함유된 비정질 탄소 박막을 증착하고, 증착조건에 따라서 박막 내부에 함유되어 있는 수소함량 변화를 2.5 MeV 헬륨 이온빔을 사용하는 ERDa로 측정하였다. ERDA의 결과와 hES 및 RBS에 의한 성분분석으로부터 본 실첨에서 증착된 박막은 탄소와 수소만으로 구성 되어있음을 확인할 수 있었고, FTIR의 결과로부터 박막 증착조건에 따라서 박막 내부에 함유되어 있는 수소함량이 변화함을 알 수 있었다. 기판 bias 전압을 증가시킬수록 이온충돌 현상이 두드러져 탄소와 결합하고 있던 수소원자들이 떨어져 나가는 탈수소화 현상으로 수소함량이 크게 감소됨을 알 수 있었다. 그 밖의 조건에서는 박막증착 초기에는 수소보다 탄소량이 좀 더 많다가 점차적으로 수소함량이 증가되었고, 이때 박막 내부에 함유되어 있는 수소함량은 45~55% 범위 내에 있음을 확인할 수 있었다.
In order to enhance the clinical efficacy of 5-aminolevulinic acid-induced photodynamic therapy (ALA-PDT), liposomal formulations using bulk hydrogenated phospholipids from soybean were introduced. Three types of lipids, S75-3, S100-3, and SL80-3 were used for formulating ALA. The pH of all the liposomal ALA is 4.5~5.5 and the size is 50~200 nm. All the liposomal formulations gave better ex vivo ALA skin penetration using nude mice skin in Franz cell than free ALA did. Among them, SL80-3 including 22% of lyso-phosphocholine achieved excellent ALA penetration when compared with those of S75-3 and S100-3 which have only 1~2% of lyso-phospholipids. S100-3 showed a little better results than S75-3 did. Addition of humectants (glycerine, propylene glycol, butylene glycol, betaine) in liposomal ALA formulated with SL80-3 produced little enhancing effect in ALA penetration. On the other hand, addition of surfactants (Tween 20, 60, Brij 72, 76, 78) in same liposomal system produced significant increase in ALA penetration. Among them, transferosomal system of lyso-phospholipid, SL80-3 and the surfactant, Brij76 showed the highest ALA penetration. Furthermore, this system also established the highest in vivo PpIX biosynthesis in hairy mice skin of C57BL/6. These results concluded that the transferosome of SL80-3 and Brij76 produced the best results in both ALA penetration and PpIX biosynthesis, and proved good correlation between them.
이유후의 Sprague Dawley종의 숫컷 쥐에게 10 % 옥수수기름 혹은 10% 야자경화유를 함유하는 식이를 5주간 주었다. 야자경유화를 주어 필수지방산을 결정시킨 식이군의 쥐와 다른 식이군의 쥐 사이에, 본 연구에서 조사한 범위내에서는 성장발달에 차이가 없었으며, 필수지방산 결핍증세를 관찰할 수 없었다. 실험군의 쥐의 조직중에서 지방조성의 변화를 살펴보면 ( 1 ) 야자 경화유를 준 쥐는 다른 군에 비하여 3주, 5주에 별장의 TG농도, 5주에 간의 TG농도가 증가하였다. (2) 야자경화유를 준 쥐는 다른 군에 비하여 3주에 혈장 Phospholipid 농도가 감소했다. 반면 생식기는 3주에 PL농도가 증가하였으며, 5주에는 PL농도 변화는 없었다. ( 3 )야자경화유를 준 쥐는 3주에 생식기의 콜레스테롤의 농도가, 5주에 신장, 부신의 콜레스테롤의 농도가 감소하였다. 이로써 성장기 쥐는 필수지방산 결핍시기에 대해, 각 조직에 따라, 또 식이기간에 따라 각기 달리 영향을 받음을 알 수 있다.
Sprague Dawley pregnant rats were fed the hydrogenated coconut oil (P/S 0.02), corn-oil plus beef tallow (P/S 1.0), and corn-oil(P/S 4.0)diet during the 14 days of gestation and through lactation. At weaning, offsprings from each group were divided into two and corn- oil diet was switched to coconut and vice versa, while the other corresponding groups continud the same diet. Body, brain, and liver weights were measured on pups and the brains were analyzed for DNA and vitamin E. Serum and liver vitamin E levels were alse measured. Body weight of coconut group was significantly low throughout the 7 week period, but brain weight was significantly depressed before weaning. Liver weight showed similar pattern with the body weight. Serum vitamin levels increased before weaning, while tissue vitamin E increased after weaning. Serum vitamin E levels of switched groups were similar to that of P/S 1.0 group. Brain vitamin E levels per DNA of switched groups were also similar to that of P/S 1.0 group. And the effect of different dietary essential fatty acid levels on vitamin E in the brain during lactation found to be insignificant.
실온에서 60Hz 저주파 플라즈마 CVD로 수소화된 비정질 탄소(a-C:H) 박막을 제조하였다. 이 방법으로 형성된 박막은 상용 주파수인 전원을 사용하기 때문에 종래의 다른 방법에 비하여 실험이 간단하고 저렴하게 제작되며, 적은 전력밀도(0.03~0.08 W/cm2를 사용하므로 시료의 손상이 작은 장정들을 가지고 있다. 본 연구에서 제작한 a-C:H 박막은 높은 투명도(95%), 높은 저항성(109~1011${\Omega}$-cm). 그리고 순도가 좋은 탄소를 유지하며 평탄성이 아주 좋다. 시료들은 기압비율이 1%에서 30%까지의 범위에서 메탄 (CH4)과 수소(H2)의 혼합기체의 분해에 의하여 제작되었다. 제작된 시료의 침전율 (deposition rate), 광학적 갭(optical gap), 그리고 수소 함량등은 메탄 함량의 증가에 따라 증가하였다. 반응시 플라즈마 온도(~ 6eV)와 밀도(107 cm-3)는 에탄함량에 거의 의존하지 않았다.
Hydrogenated Amorphous Silicon (a-Si:H) is used as an emitter layer in HIT (heterojunction with Intrinsic Thin layer) solar cells. Its low band gap and low optical properties (low transmittance and high absorption) cause parasitic absorption on the front side of a solar cell that significantly reduces the solar cell blue response. To overcome this, research on CSC (carrier Selective Contacts) is being actively carried out to reduce carrier recombination and improve carrier transportation as a means to approach the theoretical efficiency of silicon solar cells. Among CSC materials, molybdenum oxide ($MoO_x$) is most commonly used for the hole transport layer (HTL) of a solar cell due to its high work function and wide band gap. This paper analyzes the electrical and optical properties of $MoO_x$ thin films for use in the HTL of HIT solar cells. The optical properties of $MoO_x$ show better performance than a-Si:H and ${\mu}c-SiO_x:H$.
Kwon, Sangku;Ko, Jae-Hyeon;Byun, Ik-Su;Choi, Jin Sik;Park, Bae Ho;Kim, Yong-Hyun;Park, Jeong Young
한국진공학회:학술대회논문집
/
한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
/
pp.159-159
/
2013
Atomically thin graphene is the ideal model system for studying nanoscale friction due to its intrinsic two-dimensional anisotropy. Furthermore, modulating its tribological properties could be an important milestone for graphene-based micro and nano-mechanical devices. Here, we report that the tribological properties can be easily altered via simple chemical modifications of the graphene surface. Friction force microscopy measurements show that hydrogenated, fluorinated, and oxidized graphenes exhibit, 2-, 6-, and 7-fold enhanced nanoscale friction on their surfaces, respectively, compared to pristine graphene. The measured nanoscale friction should be associated with the adhesive and elastic properties of the chemically modified graphenes. Density functional theory calculations suggest that, while the adhesive properties of chemically modified graphenes are marginally reduced down to ~30%, the out-of-plane elastic properties are drastically increased up to 800%. Based on these findings, we propose that nanoscale friction on graphene surfaces is characteristically different from that on conventional solid surfaces; stiffer graphene exhibits higher friction, whereas a stiffer three-dimensional solid generally exhibits lower friction. The unusual friction mechanics of graphene is attributed to the intrinsic mechanical anisotropy of graphene, which is inherently stiff in plane, but remarkably flexible out of plane. The out-of-plane flexibility can be modulated up to an order of magnitude by chemical treatmentof the graphene surface. The correlation between the measured nanoscale friction and the calculated out-of-plane flexibility suggests that the frictional energy in graphene is mainly dissipated through the out-of-plane vibrations, or the flexural phonons of graphene.
촉매독으로 작용하는 인화합물과 유황화합물의 첨가에 의해서 수소첨가 반응되었을 때 나타나는 대두유의 물리적 화학적 성질을 규명하고저 하였다. 대두유에 첨가한 인화합물의 양이 증가할수록 oleic acid의 감소와 linoleic acid, stearic acid가 증가되었으며 유황화합물의 함량이 증가할수록 $10.0^{\circ}C$와 $21.1^{\circ}C$에서의 고체지 함량이 증가하는 반면에 점차로 $33.3^{\circ}C$와 $37.8^{\circ}C$에서 고체지 함량은 감소하였다. 유황화합물을 첨가하였을 경우에 비하여 인화합물을 첨가한 대두경화유의 융점이 높게 나타났고 유황화합물의 함량이 증가할수록 선택적인 경화조건이 나타났으며 정제공정을 거치면서 대두유에 존재하는 납과 비소는 극미량(0.01 ppm)으로 검출되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.