• 대한기계학회논문집A
• /
• 제40권7호
• /
• pp.637-646
• /
• 2016

실온에서 인코넬 718의 UNSM(Ultrasonic nanocrystal surface modification)처리재, 수소취화재(100 bar, $300^{\circ}C$에서 120 h) 및 수소취화재의 UNSM처리재의 회전굽힘피로시험에 의해 얻어진 결과, 수소취화재는 미처리재의 S-N곡선보다 피로수명이 약 10~20 % 감소하며 부식피로나 비철재료처럼 피로한도 없이 점진적으로 감소하였다. 표면균열수는 수소취화의 영향으로 평균입경($13{\mu}m$)보다 작은 균열의 비율이 약 80 %를 차지하였다. 결정입계, 표면 흠 등에 수소침투에 의한 취화현상으로 티어링(tearing)하면서 복수로 발생한 작은 표면균열은 불규칙적으로 분포하며 티어링하면서 성장, 합체되어 피로수명이 감소하는 것으로 추정된다. 미처리재에 비해서 UNSM처리재의 피로수명은 전 영역에서 크게 증가하였고, 수소취화된 시험편을 UNSM 처리한 후 피로시험을 실시하면 700 MPa에서 10배 이상, 600 MPa에서 20배 이상 증가하였다.

• 한국수소및신에너지학회논문집
• /
• 제6권1호
• /
• pp.43-52
• /
• 1995

Hydrogen storage alloy powder compacts were prepared by using automatic press, with PTFE as a binder. Hydrogen absorption and desorption characteristics and thermal conducting property of the compacts were studied using test hydrogen cylinder, comparing with bare alloy powder. The compacts showed better rate capability and activation characteristics than bare powder. Effective thermal conductivity and diffusivity of the compact bed were $1.0{\times}10^{-2}W/cmK$ and $2.0{\times}10^{-2}cm^2/S$, respectively, which were similar to that of bare powder bed. A good rate capability of the compacts was interpreted in terms of hydrogen permeation rather than thermal conductivity in the beds.

• 한국수소및신에너지학회논문집
• /
• 제15권1호
• /
• pp.32-38
• /
• 2004

Thermal behaviors of $(Cu_{0.5}Mn_{0.5})Fe_2O_4$, prepared by a solid method, were investigated for $H_2$ production by a thermochemical cycle. The thermal reduction of $(Cu_{0.5}Mn_{0.5})Fe_2O_4$ started from $300^\circ{C}$ and the weight loss was 1.3 wt% up to 1200. XRD shows the prepared ferrite has the spinel structure with a lattice constant of $8.414{\AA}$ and changed to the oxygen deficient structure by thermal reduction. Oxygen and hydrogen can be separately produced by the cycles of thermal reduction and water oxidation of the oxygen deficient ferrite.

• 대한기계학회논문집A
• /
• 제37권12호
• /
• pp.1497-1502
• /
• 2013

수소를 친환경적 에너지원으로 사용하는 경우, 수소 압력용기용 강재의 수소취화 평가 및 안전성에 대한 신뢰성이 확보되어야 한다. 본 연구에서는, in-situ SP 시험법을 적용하여 수소 저장용기로 사용이 검토되고 있는 SA372 강재의 가스 수소취화 거동을 평가하였다. 표면가공 조건을 달리한 시험편을 사용하여 대기압, 고압 수소가스 압력하에서 펀치속도를 달리한 SP 시험을 통해 가스수소 취화 거동을 조사하였다. 그 결과, SA372 강은 가스수소 압력하에서 현저한 수소취화 거동을 나타내었다. 이때 펀치속도에 따른 영향도 명확하게 나타나, 펀치속도가 낮을수록 현저한 수소취화를 나타내 낮은 SP 에너지 값을 나타내었다. 또한 SP 시험 후 파면양상 관찰결과도 펀치속도에 따른 수소취화 거동을 명확하게 나타내었다. 본 가압수소 시험조건에서는 시험편 표면조건의 영향은 명확하게 볼 수 없었다.

• 한국수소및신에너지학회논문집
• /
• 제25권3호
• /
• pp.234-239
• /
• 2014

To study catalytic activity and hydrogen embrittlement of Pd, Pt, Ni, and Cr in fuel cell electrode, we used density-functional theory. The calculation tools based electron density give much shorter calculation time and cheap costs. Maximum of bond overlap populations of each metal are 0.6539eV for Pd-H, 0.6711eV for Pt-H, 0.6323eV for Ni-H, 0.6152eV for Cr-H. Electron density of Cr has strongest in related metals, which shows strong localization of electron, implying anti hydrogen embrittlement behaviors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.858-860
• /
• 1998

A Pd-SiC Schottky diode for detection of hydrogen gas operating at high temperature was fabricated. Hydrogen-sensing behaviors of Pd-SiC Schottky diode have been analyzed as a function of hydrogen concentration and temperature by I-V and ${\Delta}I$-t methods under steady-state and transient conditions. The effect of hydrogen adsorption on the barrier height was investigated. Analysis of the steady-state kinetics using I-V method confirmed that the atomistic hydrogen adsorption process is responsible for the barrier height change in the diode.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.338-339
• /
• 2012

This study examined the friction and wear behavior of diamond-like carbon (DLC) films deposited from a radio frequency glow discharge using a hydrogen diluted benzene gas mixture. The DLC films were deposited on Si (100) and polished stainless steel substrates by r.f.-PACVD at hydrogen to benzene ratios, or the hydrogen dilution ratio, ranging from 0 to 2.0. The wear test was carried out in both ambient and aqueous environments using a home-made ball-on-disk type wear rig. The stability of the DLC coating in an aqueous environment was improved by diluting the benzene precursor gas with hydrogen, suggesting that hydrogen dilution during the deposition of DLC films suppress the initiation of defects in the film and improved the adhesion of the coating to the interface.

• 대한기계학회논문집B
• /
• 제22권4호
• /
• pp.520-529
• /
• 1998

Heat and mass transfer behaviors of metal hydride beds were predicted by solving a set of volume-averaged equations numerically both for the gas (hydrogen) and the solid(metal hydride) phases. Time variations of temperature and hydrogen concentration ratio distributions were obtained for internally cooled, cylindrical-shaped beds with metal(aluminum) fins imbedded in them. Also, time variations of the space-averaged hydrogen concentration ratio were obtained. Temperature and velocity of the coolant, hydrogen pressure at the gas inlet, and the fin spacing were taken as the parameters. The hydrogen absorption rate increases with the higher velocity and the lower temperature of the coolant, and with the decrease of the fin spacing. Increasing of the hydrogen pressure at the gas inlet also promotes the rate of absorption though the increasing rate gradually slows down. The amount of the hydrogen storage per unit volume of the bed decreases with the tighter fin spacing despite of the higher absorption rate ; therefore, there should be an optimum fin spacing for a given volume of the system and the amount of the hydrogen storage, in which the absorption rate is the highest.

• 한국수소및신에너지학회논문집
• /
• 제26권5호
• /
• pp.469-476
• /
• 2015

The purpose of this work is to investigate main factors to design a solid-state hydrogen stroage system with magnesium hydride with 10 wt% graphite using numerical simulation tools. The heat transfer characteristic of this material was measured in order to perform the highly reliable simulation for this system. Based on the measured effective thermal conductivity, a transient heat and mass transfer simulation revealed that the total performance of hydrogen storage system is prone to depend on heat and mass transfer behaviors of hydrogen storage medium instead of its inherent kinetic rate for hydrogen adsorption. Furthermore, we demonstrate that the thermodynamic aspect between equlibrium presssure and temperature is one of key factor to design the hydrogen storage system with high performance using magnesium hydride.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.158.1-158.1
• /
• 2011

In this work, we prepared ultramicroporous carbons (UC) prepared by pyrolyzing poly(vinylidene fluoride) with different carbonization temperatures, and investigated the hydrogen storage behaviors. The surface functional groups and specific elements of UC were confirmed by Fourier-transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS), respectively. Textural properties were analyzed using $N_2$ adsorption isotherms at 77 K. The hydrogen storage capacity of the UC samples were investigated by BEL-HP at 298 K/10 MPa. From the results, it was found that the hydrogen storage capacity was enhanced with increasing of specific surface area, resulting from the formation of ultramicropore on the UC.