• Journal of Animal Science and Technology
• /
• v.62 no.4
• /
• pp.587-594
• /
• 2020

In this study, we examined the effects of various hydrocolloid (alginate, carrageenan, and konjac) treatments on the quality characteristics of cold-cut duck meat jelly. Seven different types of cold-cut duck meat jelly were prepared: control, without hydrocolloids; T1, 0.5% alginate; T2, 0.5% carrageenan; T3, 0.5% konjac; T4, 0.25% alginate + 0.25% carrageenan; T5, 0.25% carrageen + 0.25% konjac; and T6, 0.25% alginate + 0.25% konjac. The pH and moisture content of the cold-cut duck meat jelly with hydrocolloids was higher (p < 0.05) than that of the control. The highest lightness value was recorded for T4 and T6 (p < 0.05), and the hardness was lower (p < 0.05) in the meat jelly with hydrocolloids than in the control, except for T2 and T5. The springiness of the meat jelly was the highest (p < 0.05) in T1 and T4. The onset, peak, and end temperatures were the lowest (p < 0.05) in the control. The highest appearance score of the meat jelly was observed in T6, and its overall acceptability was higher (p < 0.05) than that of the control, indicating that, of all the treatments, 0.25% alginate + 0.25% konjac yielded the most desirable results. Thus, the combined use of duck skin and gelatin with alginate and konjac is potentially applicable for the development of new cold-cut duck meat products.

• Fisheries and Aquatic Sciences
• /
• v.17 no.2
• /
• pp.203-207
• /
• 2014

The present study was conducted to elucidate effects of heat, salt and hydrocolloid treatments on flying fish Cypselurus agoo roe analogs prepared using calcium alginate gel. The changes in size, sphericity and rupture strength of the analogs as affected by treatments of heat, sodium chloride and hydrocolloids were investigated. The size (mm), sphericity (%), and rupture strength (kPa) of the analogs were $2.2{\pm}0.1$, $98.2{\pm}0.2$, and $74.7{\pm}1.7$, respectively. When the analogs were heated at $95^{\circ}C$ in water, the size was slightly decreased. The rupture strength by curing with 2% sodium chloride was slightly increased. Sphericity didn't show significant differences by sodium chloride and heat treatment. The rupture strength of the analogs was slightly decreased by heat treatment, whereas remarkably decreased by curing with sodium chloride. In order to prevent a remarkable decrease in rupture strength of the analogs by curing with sodium chloride, the analogs were treated with hydrocolloids such as xanthan gum, gum guar, glucomannan, pectin and gelatin. The hydrocolloids treated analogs showed an increment in size and no significant changes in sphericity. On the other hand, the rupture strength of the hydrocolloids treated analogs exhibited remarkable increase than that of untreated ones.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.886-895
• /
• 2010

The level of fat and salt can affect the product quality and storage stability of processed meats. Additionally, consumers' demands require dietary guidelines for developing low-fat/salt functional foods. Microbial transglutaminase (MTGase), which enhances textural properties by catalyzing protein-protein cross-linkages, was introduced to develop healthier lowfat/salt meat products. The potential possibilities of low-fat/salt processed meats were reviewed under optimal conditions for functional ingredients from several previous studies. The addition of non-meat protein (e.g. sodium caseinate and soy protein isolates), hydrocolloids (e. g. konjac flour, carrageenan, and alginates), and MTGase alone or in combination with other functional ingredients improved textural and sensory properties similar to those of regularly processed meats. When MTGase was combined with hydrocolloids (konjac flour or sodium alginate) or other functional ingredients, gelling properties of meat protein were improved even at a low salt level. Based on these reviews, functional ingredients combined with new processing technologies could be incorporated into processed meats to improve the functionality of various low-fat/salt meat products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.12
• /
• pp.1819-1825
• /
• 2015

This study was carried out to investigate the effect of hydrocolloids [hydroxypropylmethyl cellulose (HPMC), xanthan gum (XG), guar gum (GG), and glucomannan (GM)] on the physicochemical properties of bread flour dough containing rice flour. In amylograph analysis, the significantly lowest gelatinization temperature was obtained in dough with XG (P<0.05). XG revealed the highest maximum viscosity while GM revealed the lowest. In viscograph test, the lowest gelatinization temperature and maximum viscosity showed the same result as in the amylograph. Breakdown value was also highest in dough containing XG, but lowest in the control and dough containing HPMC. Setback value was highest in dough containing HPMC, but lowest in dough containing XG. In farinograph analysis, consistency was greatest in dough with HPMC and XG. Hydrocolloids affected water absorption, which was highest in dough containing GM. Development times of dough containing HPMC and XG were low. Stability was lowest in dough with XG. Degree of softening was reduced in dough containing HPMC and GG compared to the control but increased in dough containing XG and GM. Dough containing HPMC and GG showed the largest volume at 3 h of fermentation. Dough with HPMC showed the lowest pH value. Hydrocolloids in this study affected physicochemical properties of dough.

• Bulletin of Food Technology
• /
• v.22 no.3
• /
• pp.553-576
• /
• 2009

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1324-1332
• /
• 2016

The effects of different hydrocolloids, including hydroxypropyl methylcellulose (HPMC), xanthan gum (XG), guar gum (GG), and glucomannan (GM), on bread quality characteristics were investigated. The composite flour used for bread production consisted of 80% bread flour and 20% rice flour with 1% different hydrocolloids based on baker's%. Loaf volume, specific loaf volume, baking and cooling loss rate, moisture content, crumb texture and color, and sensory evaluation were determined. Breads containing HPMC and GM showed the highest loaf volumes, but the difference was not significant. Bread containing GM showed the lowest baking and cooling loss rate (7.03 and 7.78%, respectively), and the highest moisture content. Breads containing HPMC and GM showed increased springiness and decreased hardness based on texture profile analysis. Cohesiveness, chewiness, and gumminess of breads containing GM and HPMC showed their lowest values, whereas breads containing XG revealed their highest values. Bread with HPMC showed lightest coloured crumbs. In the sensory evaluation, bread containing GM and HPMC presented their highest scores, whereas bread containing XG showed the lowest scores. Overall, HPMC and GM significantly and positively affected quality characteristics of bread.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.438-444
• /
• 2002

Interactions between meat proteins and hydrocolloids in a model system may play an important role for the improvement of textural properties in low-fat sausage mixtures. The objective of this study was to determine gel properties as affected by the type and level of hydrocolloid, various pH values of meat protein-hydrocolloid mixture before cooking, and internal cooking temperatures. The desirable heat-induced gels (HIGs) were formed at least pH values above 6.0. The addition of konjac flour (KF), kappa-carrageenan (CN) and locust bean gum (LBG) to extracted salt soluble proteins (2%) improved the gel strength with increased levels (0.5∼1.5%) and HIGs containing CN had the highest (p<0.05) gel strength. The increase of cooking temperature increased gel strength, depending on pH and type of hydrocolloid. However, the minimun internal cooking temperature to make viscoelastic HIGs was 70$^{\circ}C$. These results indicated that desirable HIGs were manufactured with each hydrocolloid concentration of 1% and minimum cooking temperature of 70$^{\circ}C$ with pH values higher than 6.0.

• Food Science and Biotechnology
• /
• v.15 no.5
• /
• pp.721-727
• /
• 2006

This study was carried out to investigate the effect of hydrocolloids on the changes in physical properties of a model ice cream. The model ice cream contained water, sugar, skin milk powder, com oil, and 4 different hydrocolloid stabilizers (gelatin, pectin, hydroxyethylstarch, locust bean gum), was manufactured in a batch type freezer. The following physical characteristics of ice cream were examined: flow behavior, overrun, air cell size, ice crystal size, and melt resistance. With regard to flow behavior, all of aged mixes had a lower apparent viscosity relative to the mix before aging, and ice cream mix containing locust bean gum had the highest viscosity. Air cell size was observed to range from 20 to $38\;{\mu}m$, and ice cream with locust bean gum showed the largest size. There was an inverse correlation between overrun and air cell size. The ice crystal sizes of all samples ranged from 25 to $35\;{\mu}m$. Ice cream with added pectin contained the smallest ice crystal size, which was significantly difference from other stabilizers (p<0.05), and resulted in superior melt resistance with increased melting time compared to other samples.

• Korean journal of food and cookery science
• /
• v.12 no.1
• /
• pp.20-26
• /
• 1996

The present study was attempted to investigate and to evaluate various hydrocolloids as a stabilizer in improving texture of the frozen yogurt. Four kinds of hydrocolloids used in this study were CMC (carboxymethyll cellulose), PGA(propylene glycol alginate), LMP(low methoxyl pectin), and the combination of LBG(locust bean gum) and GG(guar gum). The viscosity of frozen yogurt mixes did not show any significant differences among four samples at 5$^{\circ}C$. However, as the temperature increased up to 50$^{\circ}C$, theviscosity of frozen yogurt mixes containing CMC, LMP, PGA decreased drastically except frozen yogurt containing the combination of LBG+GG. The overrun of frozen yogurt containing each hydrocolloid gradually increased and reached to about 53, 50, 54, and 35%, respectively, after 40 min of operating ice cream freezer. As the result of sensory evaluation in the texture of frozen yogurt and melt-down quality, the sample containing LMP was described as the most coarce & icy, crumbly, and sand-like characters. On the other hand, PGA sample was evaluated as not being icy, crumbly, but being chewy and soft in texture. However, any significant differences among four samples were not shown in melt-down quality.

• Korean journal of food and cookery science
• /
• v.33 no.2
• /
• pp.198-208
• /
• 2017

Purpose: To improve the quality of basic gluten-free rice bread composed of white rice flour, salt, sugar, yeast, skim milk powder, olive oil, and water, the effects of transglutaminase (TGase), whey protein (WP), propylene glycol alginate (PGA), and hydroxypropylmethylcelluose (HPMC) were investigated. Methods: TGase, WP, PGA, and HPMC were added to rice flour cumulatively. The pasting properties of rice flour blends as well as volume, shape, color value, textural properties and sensory evaluation of basic rice bread (RB1) RB1+TGase (RB2), RB1+TGase+WP (RB3), RB1+TGase+WP+PGA (RB4), and RB1+TGase+WP+PGA+HPMC (RB5) were compared. Results: Consistency of rice batter increased upon addition of TGase, WP and PGA, and RB3 and RB4 had higher specific volumes than others. PGA improved volume, crumb air cell uniformity, and resilience but lowered elasticity and moistness of RB. HPMC increased, hardness, moistness and softness, and slightly reduced volume. Conclusion: Therefore, it is suggested that hydrocolloids, PGA and HPMC may be necessary to improve volume, crumb structure, textural properties and overall eating quality of gluten-free rice bread.