• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.136-144
• /
• 2006

Vehicles usually have 3 types of speed pattern like acceleration, travel, and deceleration. It requires much driving energy from engine while accelerating, preserves much kinetic energy by inertia moment at travel speed, and releases the kinetic energy to the air while decelerating by the break system. If we accumulate the kinetic energy while decelerating and reuse the energy at the accelerating stage, then it can elevate the fuel efficiency, reduce the emission and improve the motive power. This paper proposes a hydraulic type energy regenerative system which converts the kinetic energy into hydraulic energy at the stage of deceleration and reuses it at the starting and accelerating stage of vehicles. The test equipment which has the field condition of city bus was prepared to evaluate the performance for energy regeneration. The test results show that both energy regeneration efficiency and fuel efficiency are improved significantly and the emission is reduced notably.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.675-680
• /
• 1990

According to the recent increase of demands for multi-function and economics on hydraulic excavator, it is required that excavator should have simple operation, higher and operational efficiency. However, it is difficulty for current hydraulic system to satisfy demands fully. This study shows that new control system improves power transmission efficiency, work capability of engine and hydraulic system of current excavator.

• 전력전자학회논문지
• /
• 제11권1호
• /
• pp.1-6
• /
• 2006

본 논문에서는 유압펌프 시스템의 효율적 구동을 위한 SRM 구동시스템이 제안된다. 유압 펌프 시스템이 요구하는 최대 사용 유압 및 사용유량으로부터 적정한 용량의 SRM을 설계 및 제작하고, 시험을 위해 SRM과 제어기를 포함한 전체 유압시스템을 구성한다. 제시한 SRM 구동시스템은 효율적 구동을 위해 속도제어 뿐만 아니라 유압계통의 압력검출로부터 압력제어도 같이 행하며, 이로부터 SRM이 적정한 운전영역에서 구동되도록 한다. 2.2[KW] 12/8극 SRM과 DSP를 사용한 제어기가 설계되고, 이 시스템을 실제 유압시스템에 적용하여 운전 특성을 확인하였다. 그 결과 제안한 시스템이 고효율과 빠른 응답특성을 가짐을 알 수 있다.

• 한국기계가공학회지
• /
• 제19권10호
• /
• pp.74-80
• /
• 2020

Crawler-type hydraulic devices facilitate forward and backward driving of construction equipment by converting power into mechanical energy. The existing hydraulic device performance test process is time- and labor-intensive. This study aims to improve efficiency and productivity by automating the hydraulic device production performance test processes, which have been separately conducted so far. We also used SolidWorksⓇ, a 3D modeling program, and ANSYSⓇ, a structural analysis tool, for structural analysis and to verify the suitability of fixing pins required for connecting a hydraulic device to performance test equipment. Our results that employing an automated hydraulic device performance test process improves efficiency.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1225-1230
• /
• 2007

The turnover-type sluice gate is typically actuated by the hydrauic system. The hydraulic system may be a open circuit type or a closed circuit type. The open circuit type hydraulic system is composed of a uni-directional pump, a directional control valve, pilot operated check valves, flow control valves, single-rod cylinders. The closed circuit type hydraulic system is composed of a bi-directional pump, pilot operated check valves, check valves, a counter balance valve, single-rod cylinders. The energy efficiencies of two hydraulic systems for the turnover-type sluice gate are compared here.

• Tribology and Lubricants
• /
• 제19권2호
• /
• pp.59-64
• /
• 2003

In this study, the hydraulic breaker system was analyzed and the analysis tool using GUI was developed. The analysis on the system with the accumulator was included. From the parametric analysis, the effects of each factor were revealed. Through the simulation with varying parameters, the method to improve the performance of the hydraulic breaker system was presented. The analysis tool will help a man without special knowledge about programming analyze the hydraulic breaker system. The result of this study will help improve the hydraulic breaker system in sight of Blow energy and Blows per minute.

• 한국수산과학회지
• /
• 제50권3호
• /
• pp.250-256
• /
• 2017

This study investigated the removal efficiency of organic matter and nitrogen from fish farm effluent by hydraulic retention time (HRT) using an upflow biological filter (ANR system) reactor. The recycling time and influent flow in the reactor were controlled to 14.8, 7.4, 5.5 and 3.2 h to evaluate HRT. In addition, each reactor was coupled to a fixed bed upflow filter charged with media. The results showed that removal efficiency was ${\geq}95%%$ with an HRT of 5.5 h, and nitrification efficiency was reduced to 81% with an HRT of 3.2 h, although nitrification efficiency temporarily decreased due to the shock load as HRT decreased. Total nitrogen removal rate was also reduced to about 65% with an HRT of 3.2 h, which was considered a washout effect of nitrifying and denitrifying microorganisms by increasing the shearing force to the filter media, which decreased organic matter and nitrogen removal efficiency.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권7호
• /
• pp.1052-1059
• /
• 2009

The effects of varying the inlet flow angle on the output power of a Francis hydraulic turbine were studied numerically and the result was compared to the experimental results conducted at Korea Institute of Energy Research to determine the brake power of the turbine for each set of operating conditions. The loss of mechanical power of the model turbine was determined by comparing the numerical and experimental results, and thus the turbine efficiency or energy conversion efficiency of the model turbine could be estimated. From the result, it was found that the maximum brake efficiency of the turbine is approximately 46% at an induced angle of 35 degrees. The maximum indicated mechanical efficiency of the turbine is approximately 93% at an induced angle of 25~30 degrees.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.748-756
• /
• 2005

The Purpose of this writing is a presentation of small turbine efficiency measuring method, applicable new technology, and several analysis result for real turbine. Measurement methods of hydraulic efficiency written in here are extracted from small turbine applicable international code(IEC, ASME). It includes brief synopsis of 'Current meter method' and 4 other methods and ASFM as a new small turbine applicable technology. And several analysis of test result are for recently performed domestic small turbine result in korea. Through this presentation of extracted code, I hope that it make other small turbine concerner be familiar to perform an efficiency test. for small turbine. And, some analysis of that, make other to feel the importance of efficiency test.

• 터널과지하공간
• /
• 제24권5호
• /
• pp.373-385
• /
• 2014

최근 국내에서는 폐광산 지반보강공사를 실시함에 있어 수압식 충전법을 적용하는 사례가 증가하고 있으나 효율적인 충전법 적용을 위한 다양한 연구가 미흡한 실정이다. 본 연구에서는 수압식 충전공법의 충전효율 개선을 위한 충전재료의 입도, 충전관의 형태 및 충전관 직경을 변경해 가면서 현장실험을 실시하였다. No.100체 통과백분율이 16.3% 인 모래를 이용하여 수직관 및 이경티관의 종류에 따른 충전량을 실험결과, 수직관을 이용하여 수로관에 충전한 경우 모래 충전량이 28.84 ton이였고, 100 mm 이경티관을 사용하여 충전한 경우 모래 충전량이 42.62 ton, 80 mm 이경티관을 사용하여 충전한 경우 모래 충전량이 53.33 ton, 50 mm 이경티관을 사용하여 충전한 경우 모래 충전량이 63.33 ton으로 각각 약 47.8%, 84.9%, 119.6% 증가하는 것을 확인할 수 있었다. 이는 단순 충전관의 형태만 변경해도 충전 효과를 극대화 할 수 있을 것으로 기대된다.