• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.103-114
• /
• 2011

Usage of bicycle has been supported the universal reduction of energy consumption and $CO_2$. For the same purpose, new constructions for long length bike roads are planned in Korea. Recently, laboratory tests of physical properties and resistance against environmental loading about optimum mix design of roller compacted concrete, that have advantages of high structural performance by cement hydration and aggregate interlocking, simple construction procedure and low construction cost, are performed for the effective construction of new bike roads. However, properties of roller compacted concrete had different results between laboratory and field tests since it had different compaction method. Also, construction method of roller compacted concrete are not defined for the application of bike roads since it had different demand performance such as thin pavement thickness, low strength and etc with road pavements. Thus, in this experimental research was launched to evaluate the core properties, visual inspection, compaction ratio, water content, thickness reduction rate of roller compaction, skid resistance and roughness by experimental construction about variable mix proportion and compaction method based on laboratory test results. And construction method of roller compacted concrete pavement were suggested for the application of bike roads.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.633-640
• /
• 2010

This study was performed to get basic information about properties of high blaine cement for shotcrete use. Particle size distribution, setting time and compressive strength test, analysis like as SEM, DSC thermal analysis, XRD was carried out to investigate principle properties of high blaine cement. Setting time of high blaine cement was shorter and compressive strength was higher than those of ordinary portland cement (OPC). Results of analysis showed early hydration products of high blaine cement is smaller and spread widely due to increased specific surface. From the SEM observation and analysis of DSC and XRD results, it was seen that the aluminates accelerators promoted calcium aluminium hydrates while the alkali free accelerators increased ettringite and monosulfates formation. Strength and setting time measurement of cement paste with aluminate accelerator is more effective than the alkali free accelerator in reducing the setting time and increasing early strength while alkali free accelerator is more effective in increasing the strength after 7 days.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.6
• /
• pp.256-262
• /
• 2018

A great amount of fly ash, which is a waste from a thermal power plant, has not been appropriately recycled until now. Landfill of flay ash causes environmental pollution and enormous economic costs. In this study, manufacturing of architectural ceramic tile was investigated replacing fly ash with clay raw material. The properties of porcelain tile was analyzed after manufacturing porcelain tile with mineral based glaze and fast firing process. In particular, the effect of the fly ash addition on the properties of ceramic tile was investigated by increasing the amount of limestone addition. Porcelain tile with fly ash showed excellent bending strength, water absorption, warping and abrasion resistance. However, a significant decrease in durability was observed through the autoclave test. Addition of limestone increased the water absorption, twisting and hydration expansion of the ceramic tile, but it was confirmed that the durability of the ceramic tile with fly ash was greatly improved. In conclusion, recycled architectural ceramic tiles, which can meet domestic construction standards, could be manufactured with the addition of fly ash and limestone.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.501-507
• /
• 2011

To develop environmental-friendly insulating composite materials, natural cellulose and porous ceramic balls were used as core materials and activated Hwangtoh was used as a binder. Various specimens were prepared with different water/binder ratios and core material/binder ratios. The physical properties of these specimens were then investigated through compressive strengths, flexural strengths, absorption test, hot water resistance test, pore analysis, thermal conductivity, and observation of micro-structures using scanning electron microscope. Results showed that the maximum compressive strength varied appreciably with the water/binder ratios and core material/binder ratios, but the flexural strength increased with the core material/binder ratios regardless of water/binder ratios. The compressive strength and the flexural strength measured after the hot water resistance test decreased remarkably compared to those measured before test. The pore analysis measured after the hot water resistance test showed that total pore volume, porosity and average pore diameter decreased, while bulk density increased by the acceleration of hydration reaction of binder in the hot water. The thermal conductivity decreased gradually with an increase of core material/binder ratios. It can be evaluated that the composite insulation materials having good insulating properties and mechanical strengths can be used in the field.

• Food Engineering Progress
• /
• v.23 no.4
• /
• pp.283-289
• /
• 2019

This study was performed to determine the effect of psyllium husk addition on the physical properties of rice extrudates. Rice-based formulations mixed with psyllium husk (0, 7, 14 and 21%) were extruded at a die temperature of 140℃, screw speed of 200 rpm, and moisture content of 20%. As the content of psyllium husk increased, expansion ratio decreased, while piece density and specific length increased. Apparent elastic modulus, breaking strength, adhesiveness, and hardness augmented with an elevation in psyllium husk content. Lightness declined as psyllium husk content furthered, while redness, yellowness, and color difference intensified. Water soluble index and water absorption index increased with an increased amount of psyllium husk. In conclusion, the addition of psyllium affected the expansion of extruded rice snack possessing hard texture, small cells, and sticky texture due to higher water absorption during hydration.

• The Journal of the Korean dental association
• /
• v.50 no.3
• /
• pp.148-154
• /
• 2012

Mineral trioxide aggregate (MTA) is mainly composed of lime and silica. Its four major phases are tricalcium silicate, dicalcium silicate, tricalcium aluminate, and tetracaclcium aluminoferrite. MTA has relatively long initial setting time (2h 45m) and various additives can be added to reduce setting time. Compressive strength of MTA increases with time and reaches 100 MPa after 28 days. MTA has high pH of 9-12.5 because of the formation of calcium hydroxide during its hydration reaction. MTA has superior sealing ability to amalgam and IRM when it is used in perforation repair or root end filling. MTA is safe in cytotoxicity and genotoxicity and have potential to promote pulpal and periapical hard tissue formation.

• Journal of the Korean Ceramic Society
• /
• v.56 no.6
• /
• pp.558-565
• /
• 2019

In this study, dimethyl silicone oil and liquid paraffin were combined and subsequently emulsified; the resulting mixture was innovatively incorporated into desulfurized gypsum to resolve its drawback of a poor water resistance. The waterproof mechanism of the composite emulsion and liquid paraffin emulsion with mass fractions of 1%, 2%, 3%, and 4% were investigated. The effect of the desulfurized gypsum on the waterproof performance and basic mechanical properties were also investigated. The configuration of the composite waterproofing agent was characterized by FTIR and ¹HNMR. The results showed that, compared with the traditional liquid paraffin emulsion-based waterproofing agent, the softening coefficient of the silicone oil paraffin composite emulsion-based water-repellent agent was increased by 60% and attained a value of 0.89. Combined with the waterproof mechanism and microscope morphology analysis of gypsum hydration products, the improvement in the water resistance of water resistance was primarily attributed to the formation of a silicone hydrophobic membrane between the crystals of the gypsum block; this ensured that water could not penetrate the crystal.

• International Journal of Advanced Culture Technology
• /
• v.8 no.1
• /
• pp.236-242
• /
• 2020

In this paper, we present the improvement in low moisturizing ability and stability that existing skin softeners have due to the low oil content, by developing skin softener using nanoemulsion of phospholipid liposome, based on the properties of nanoemulsion in cosmetic formulation. In this study, two types of oil; dimethicone (DC 200/6cs) or medium chain triglyceride (MCT), and two kinds of lecithin; unsaturated or saturated were respectively applied to produce nanoemulsion. In the particle size analysis of nanoemulsion, the droplet size of nanoemulsion containing DC200/6cs and unsaturated lecithin was the smallest, and all nanoemulsion showed high stability in the measurement of zeta potential. Therefore, with the smallest particle size and high stability, moisture contents and trans epidermal water loss(TEWL) were measured using the skin softener of DC200/6cs and unsaturated lecithin contained nanoemulsion, and the measurement was compared with the non-oil skin softener and the skin softener with only small amount of oil. The results showed that the moisture content of the skin softener using nanoemulsion increased greatly than other two skin softeners, showing high hydration ability and water retention capacity, and TEWL decreased greatly, therefore preventing the evaporation of moisture from the skin. As a result, the oil content and stability of the skin softener was improved by utilizing nanoemulson based of phospholipid liposome, and it is expected to be used in various ways in cosmetic industry.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.822-829
• /
• 1997

When $Al_2(SO_4)_3$ as an accelerator was added to $\beta$-hemihydrate gypsum, the setting time, mobility and compressive strength properties of $\beta$-hemihydrate gypsum were examined with the adding of two types grounded gypsum crushed by ball mill. By 15wt% adding of 7% $Al_2(SO_4)_3$ dilute solution, the setting time of $\beta$-hemihydrate gypsum was sharply accelerated than that of non-added $\beta$-hemihydrate gypsum. When ground phospho gypsum(PG) and chemical gypsum(CG) were added to $\beta$-hemihydrate gypsum, the initial and final setting time of $\beta$-hemihydrate gypsum were accelerated markedly with the increasing of grinding time and added amount of ground phospho gypsum. Especially, this trend largely presented when ground phospho gypsum was added to $\beta$-hemihydrate gypsum. The compressive strength of $\beta$-hemihydrate gypsum added by ground phospho and chemical gypsum was largely increased at initial curing time such as 1, 3 days. Particularly, the compressive strength of $\beta$-hemihydrate gypsum added by ground phospho gypsum was increased by 15~20% than that of ground chemical gypsum.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.427-435
• /
• 2010

One of the most vulnerable properties in concrete is tensile cracking, which usually happens at early ages due to hydration heat and shrinkage. In order to accurately predict the early age cracking, it needs to find out how stress-crack opening relation is varying over time. In this study, inverse analyses were performed with the existing experimental data for wedge-splitting tests, and the parameters of the softening curve for the stress-crack opening relation were determined from the best fits of the measured load-CMOD curves. Based on the optimized softening curve, variation of fracture energy over time was first examined, and a model for the stress-crack opening relation at early ages was suggested considering the found feature of the fracture energy. The model was verified by comparisons of the peak loads, CMODs at peak loads, and fracture energies obtained from the experiments and the inverse analysis.