• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.724-727
• /
• 2008

Studies on binary adder have been variously developed. According to those studies of critical worst delay and mean delay time of asynchronous binary adders, carry select adders (CSA) based on hybrid structure showed 17% better performance than ripple carry adders (RCA) in 32 bit asynchronous processors, and 23% better than in 64 bit microprocessor implemented. In the complicated signal processing systems such as RSA, it is essential to optimize the performance of binary adders which play fundamental roles. The researches which have been studied so far were subject mostly to addition algorithms or adder structures. In this study, we analyzed and designed adders in an asp;ect of synthesis method. We divided the ways of implementing adders into groups, each of which was synthesized with different synthesis options. Also, we analyzed the variously implemented adders to evaluate the performance and area so that we can propose a different approach of designing optimal binary adders.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.837-843
• /
• 2006

IEEE802.15.3 and IEEE802.15.4 have defined the hybrid MAC protocols based on TDMA and CSMA where a multi-frame TDMA structure is employed so that multiple data frames can be transmitted within one timeslot to guarantee minimum delay bounds of isochroous traffic. However, TDMA has an intrinsic problem that cannot dynamically allocate optimal length of timeslot to each station. Therefore the idle timeslot can be produced by stations when each transmission queue is instantaneously empty during its timeslot, which would waste lots of timeslots especially in the multi-frame TDMA systems. In this paper, we propose a more flexible multiple-access scheme for the multi-frame TDMA system based on the concept of virtual slot which is accessible by every station with the highest priority for slot owner and lower priority for other stations. Finally, our simulation results from various environments show that proposed scheme can achieve magnitude improvement of total system throughput and average message delay by maximizing channel utilization.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.9
• /
• pp.1158-1165
• /
• 1999

조건부 분기 명령어(conditional branch instruction)의 잘못된 분기 예측(branch misprediction)은 프로세서의 성능 향상에 심각한 장애 요인이 되고 있다. 특히 시분할(time-sharing) 시스템과 같이 문맥 교환(context switch)이 발생하는 멀티프로그래밍 환경(multiprogramming environment)에서는 더욱 낮은 분기 예측 정확성(branch prediction accuracy)을 보인다. 본 논문에서는 문맥 교환이 발생하는 멀티프로그래밍 환경에서 높은 분기 예측 정확성을 보이는 중첩 분기 예측표 교환(Overlapped Predictor Table Switch, OPTS) 기법을 소개한다. 분기 예측표(predictor table)를 분할하여 각각의 프로세스(process)에 할당하는 OPTS 기법은 문맥 교환의 영향을 최소화함으로써 높은 분기 예측 정확성을 유지하는 분기 예측 방법이다.Abstract There is wide agreement that one of the most important impediments to the performance of current and future pipelined superscalar processors is the presence of conditional branches in the instruction stream. Accurate branch prediction is required to overcome this performance limitation. Many branch predictors have been proposed to help to alleviate this problem, including the two-level adaptive branch predictor, and more recently, hybrid branch predictor. In a less idealized environment, such as a time-sharing system, code of interest involves context switches. Context switches, even at fairly large intervals, can seriously degrade the performance of many of the most accurate branch prediction schemes. In this study, we measure the effect of context switch on the branch prediction accuracy in various situation and show the feasibility of our new mechanism, OPTS(Overlapped Predictor Table Switch), which save and restore branch history table at every context switch.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.103-103
• /
• 2000

In this paper to cope with the reduction of products life-cycle as the variety of products along with the various demands of consumers, a virtual simulator is developed to make the changeover of manufacturing line efficient to embody a virtual simulation similar to a real manufacturing line. The developed virtual simulator can design a layout of a factory and make the time scheduling. Every factory has one simulator so that one product can be manufactured in the factories to use them as virtual factories. We suggest a scheme that heightens the agility to the diversity of manufacturing models by making the information of manufacturing lines and products models to be shared. The developed unit simulator can construct a proper virtual manufacturing line along with the required process of products using several kinds of operator and work cell. A user with the simulator can utilize an interface that makes one to manage the separate task process for each manu(acturing module, change operator components and work cells, and easily teach tasks of each task module. The developed simulator was made for users convenience by Microsoft Visual C++ 6.0 that can develop a program supplying graphic user interface environment and by OpenGL of the Silicon Graphics as a graphic library to embody 3D graphic environment. Also, we show that the simulator can be used efficiently for the agile manufacturing by the communication among the factories being linked by TCP/IP and a hybrid database system made by a hierarchical model and a relational model being developed to standardize the data information.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.129-137
• /
• 2009

Operation of intelligent transport systems technologies in transportation networks and more detailed analysis give rise to necessity of dynamic traffic analysis model. Existing static models describe network state in average. on the contrary, dynamic traffic analysis model can describe the time-dependent network state. In this study, a dynamic traffic model for the expressway system using FTMS data is developed. Time-dependent origin-destination trip tables for nationwide expressway network are constructed using TCS data. Computation complexity is critical issue in modeling nationwide network for dynamic simulation. A subarea analysis model is developed which converts the nationwide O-D trip tables into subarea O-D trip tables. The applicability of the proposed model is tested under various scenario. This study can be viewed as a starting point of developing deployable dynamic traffic analysis model. The proposed model needs to be expanded to include arterial as well without critical computation burden.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.5
• /
• pp.1303-1315
• /
• 2012

In the draft of the IEEE 802.11s standard, a tree topology is established by the proactive tree-building mode of the Hybrid Wireless Mesh Protocol (HWMP). It is used for cases in which the root station (e.g., gateway) is an end point of the majority of the data connections. In the tree topology, the root or central stations (e.g., parent stations) are connected to the other stations (e.g., leaves) that are one level lower than the central station. Such mesh stations are likely to suffer heavily from contention in bottleneck links when the network has a high traffic load. Moreover, the dependence of the network on such stations is a point of vulnerability. A failure of the central station (e.g., a crash or simply going into sleep mode to save energy) can cripple the whole network in the tree topology. This causes performance degradation for end-to-end transmissions. In a connected mesh topology where the stations having two or more radio links between them are connected in such a way that if a failure subsists in any of the links, the other link could provide the redundancy to the network. We propose a scheme to utilize this characteristic by organizing the network into concentric tiers around the root mesh station. The tier structure facilitates path recovery and congestion control. The resulting mode is referred to as Tier-based Proactive Path Selection Mode (TPPSM). The performance of TPPSM is compared with the proactive tree mode of HWMP. Simulation results show that TPPSM has better performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.5
• /
• pp.458-465
• /
• 2011

UAV-UGV teaming concept has been proposed that can compensate for weak points of each platform by providing carrying, launching, recovery and recharging capability for the VTOL-UAV through the host UGV. The teaming concept can expand the observation envelop of the UGV and extend the operational capability of the UAV through mechanical combination of each system. The spherical-shaped coaxial rotorcraft UAV is suggested to provide flexible and precise interface between two systems. Hybrid navigation solution that included vision-based target tracking method for precision landing is investigated and its experimental study is performed. Feasibility study on length-variable rotor to provide the compact configuration of the loaded rotorcraft platform is also described.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.7
• /
• pp.3018-3038
• /
• 2020

In the stereoscopic or multiview display, the depth video illustrates visual distances between objects and camera. To promote the computational efficiency of depth video encoder, we exploit the intra prediction of depth videos under Versatile Video Coding (VVC) and observe a diverse distribution of intra prediction modes with different coding unit sizes. We propose a hybrid scheme to further boost fast depth video coding. In the first stage, we adaptively predict the HADamard (HAD) costs of intra prediction modes and initialize a candidate list according to the HAD costs. Then, the candidate list is further improved by considering the probability distribution of candidate modes with different CU sizes. Finally, early termination of CU splitting is performed at each CU depth level based on the Bayesian theorem. Our proposed method is incorporated into VVC intra prediction for fast coding of depth videos. Experiments with 7 standard sequences and 4 Quantization parameters (Qps) validate the efficiency of our method.

• Journal of the Korean Society for Library and Information Science
• /
• v.45 no.4
• /
• pp.77-102
• /
• 2011

The purpose of this study is to design, implement and evaluate a personalized search system using gathered information on users to provide more accurate search results. For this purpose, a hybrid-based user profile is constructed by using subject classification. In order to evaluate the performance of the proposed system, experts directly measured and evaluated MRR, MAP and usability by using the Korean journal articles of science and technology DB. Its performance was better than the general search system in the area of "Computer Science" and "Library and Information Science". Especially better results were shown when tested on ambiguous keywords. Evaluation through in-depth interviews proved that the proposed personalized search system was more efficient in looking up and obtaining information. In addition, the proposed personalized search system provided a variety of recommendation systems which proved helpful in navigating for new information. High user satisfaction ratings on the proposed personalized search system were another proof of its usefulness. In this study, we were able to prove through expert evaluation that the proposed personalized search system was more efficient in information retrieval.

• Journal of Information Processing Systems
• /
• v.16 no.5
• /
• pp.1196-1213
• /
• 2020

There is a growing interest in the development of smart environments through predicting the behaviors of inhabitants of smart spaces in the recent past. Various smart services are deployed in modern smart cities to facilitate residents and city administration. Prediction algorithms are broadly used in the smart fields in order to well equip the smart services for the future demands. Hence, an accurate prediction technology plays a vital role in the smart services. In this paper, we take out an extensive survey of smart spaces such as smart homes, smart farms and smart cars and smart applications such as smart health and smart energy. Our extensive survey is based on more than 400 articles and the final list of research studies included in this survey consist of 134 research papers selected using Google Scholar database for period of 2008 to 2018. In this survey, we highlight the role of prediction algorithms in each sub-domain of smart Internet of Things (IoT) environments. We also discuss the main algorithms which play pivotal role in a particular IoT subfield and effectiveness of these algorithms. The conducted survey provides an efficient way to analyze and have a quick understanding of state of the art work in the targeted domain. To the best of our knowledge, this is the very first survey paper on main categories of prediction algorithms covering statistical, heuristic and hybrid approaches for smart environments.