• Structural Engineering and Mechanics
• /
• v.81 no.1
• /
• pp.11-28
• /
• 2022

This paper considers the combination of cyclic and axial loads to investigate the hysteretic performance of H-section 6061-T6 aluminum alloy members. The hysteretic performance of aluminum alloy members is the basis for the seismic performance of aluminum alloy structures. Despite the prevalence of aluminum alloy reticulated shells structures worldwide, research into the seismic performance of aluminum alloy structures remains inadequate. To address this deficiency, we design and conduct cyclic axial load testing of three H-section members based on a reliable testing system. The influence of slenderness ratios and bending direction on the failure form, bearing capacity, and stiffness degradation of each member are analyzed. The experiment results show that overall buckling dominates the failure mechanism of all test members before local buckling occurs. As the load increases after overall buckling, the plasticity of the member develops, finally leading to local buckling and fracture failure. The results illustrate that the plasticity development of the local buckling position is the main reason for the stiffness degradation and failure of the member. Additionally, with the increase of the slenderness ratio, the energy-dissipation capacity and stiffness of the member decrease significantly. Simultaneously, a finite element model based on the Chaboche hybrid strengthening model is established according to the experiment, and the rationality of the constitutive model and validity of the finite element simulation method are verified. The parameter analysis of twenty-four members with different sections, slenderness ratios, bending directions, and boundary conditions are also carried out. Results show that the section size and boundary condition of the member have a significant influence on stiffness degradation and energy dissipation capacity. Based on the above, the appropriate material constitutive relationship and analysis method of H-section aluminum alloy members under cyclic loading are determined, providing a reference for the seismic design of aluminum alloy structures.

• Journal of Environmental Science International
• /
• v.33 no.8
• /
• pp.591-604
• /
• 2024

To investigate the frequency and trajectories of volcanic ash from Mt. Baekdu reaching the Korean Peninsula, a forward trajectory analysis was conducted using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model. Through a cluster analysis of air parcel trajectories, we identified the main pathways of the volcanic ash from Mt. Baekdu entering the Korean Peninsula and analyzed the synoptic meteorological conditions on those days. The frequency of volcanic ash reaching the Korean Peninsula was 82 times at an altitude of 1000 m and 70 times at 2000 m, with an increasing trend from 2016 to 2022. This increase is attributed to the weakening of westerly winds and the strengthening of north-south winds due to global warming. Five and three trajectory clusters were classified at 1000 m and 2000 m, respectively. At a starting altitude of 1000 m, most air parcels originating from Mt. Baekdu entered the Korean Peninsula under weather conditions (C2, C3) where the pressure gradient from the northwest to the southeast was small, resulting in weak northerly winds. C2 and C3 showed shorter trajectories, which occurred in all seasons, except summer. At a starting altitude of 2000 m, air parcels mostly passed over the Korean Peninsula in a synoptic pattern similar to that at 1000 m in altitude; however, the air parcels had simpler paths and less frequent inflow. C2, at a starting altitude of 2000 m, originates from Mount Baekdu, crosses the center of the Korean Peninsula, and continues to the central region. At a starting altitude of 1000 m, volcanic ash can enter the Korean Peninsula when there is no strong low-pressure system to the southeast of the Korean Peninsula, whereas at 2000 m, volcanic ash can enter the Korean Peninsula when the Siberian high-pressure system is weak.

• Journal of Plant Biotechnology
• /
• v.45 no.3
• /
• pp.155-170
• /
• 2018

In this paper, mechanisms of gene editing technologies including ZFN, TALENS and CRISPR were briefly discussed with mutual advantages and disadvantages. Classification criteria of gene edited, site-directed mutagenesis (SDN) crops for regulatory purpose were also discussed. The number of studies using CRISPR technology was high and studies conducted on Arabidopsis thaliana and rice were highest, followed by tobacco, tomato, wheat, and corn. It has been applied to a variety of plants such as other grain crops, flower crops, vegetable crops, and fruit trees. The number of studies focused on practical application or commercialization in the future were also increasing yearly, and the scope of studies also expanded to include research on metabolic engineering for mass production of useful proteins or substances, development of disease resistant crops against viruses, bacteria, and fungi, abiotic environmental stressresistant crops, and increased yields. In addition to this, it was revealed that application range is becoming more diversified, including the development of parthenocarpic tomatoes, hybrid rice lines using male sterility and increased shattering resistance Brassica napus. It was also revealed that the number of CRISPR gene edited crops permitted by the USDA(APHIS) increases yearly, to be released in the international seed market soon.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.875-888
• /
• 2018

The Government of the Republic of Korea has been continuously improving its legal system to ensure marine safety as a precaution against marine accidents. However, despite the ongoing improvement of the legal system, the number of maritime accidents has been increasing steadily, suggesting that the efficacy of the legal system is insufficient. As for recent marine accidents, small fishing vessels (less than 10 tons) account for 44.9 % of marine accidents over 5 years ('13_'17). Therefore, this study investigated the improvement status of the Korean government's legal system for small fishing vessels and the characteristics of related overseas legal systems in order to find a way to further improve marine safety for small fishing vessels. Following the results, the Korean government's laws related to small fishing vessels show a hybrid phenomenon due to the history of merging ('97) and separation ('09) of legal systems for fishing and non-fishing vessels, and it has been concluded that only improvements to construct additional facilities are being performed, and those in a fragmentary manner. In addition, overseas legal systems for small fishing vessels were confirmed to have requirements strengthening the responsibility of owners and operators of fishing vessels and introduced a self-inspection program. Based on these results, a plan is suggested to improve the efficacy of the legal system to ensuree marine safety for small Korean fishing vessels.