• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.1
• /
• pp.41-47
• /
• 2002

Fractal image compression can reduce the size of image data by the contractive mapping that is affine transformation to find the block(called as range block) which is the most similar to the original image. Even though fractal image compression is regarded as an efficient way to reduce the data size, it has high distortion rate and requires long encoding time. In this paper, we presented a hybrid fractal image compression system with the modified SOFM Vector Quantizer which uses improved competitive learning method. The simulation results showed that the VQ hybrid fractal using improved competitive loaming SOFM has better distortion rate than the VQ hybrid fractal using normal SOFM.

• Nuclear Engineering and Technology
• /
• v.50 no.7
• /
• pp.1060-1067
• /
• 2018

A feasibility of reusing option of spent nuclear fuel in a fusion-fission hybrid system without partitioning was checked as an alternative option of pyro-processing with critical reactor system. Neutronic study was performed with MCNP 6.1 for this option, direct reuse of spent PWR fuel (DRUP). Various options with DRUP fuel were compared with the reference design concept; transmutation purpose blanket with (U-TRU)Zr fuel loading connected with pyro-processing. Performance parameters to be compared are transmutation performance of transuranic (TRU) nuclides, required fusion power and tritium breeding ratio (TBR). When blanket part is loaded only with DRUP, initial $k_{eff}$ level becomes too low to maintain a practical subcritical system, increasing the required fusion power. In this case, production rate of TRU nuclides exceeds the incineration rate. Design optimization is done for combining DRUP fuel with (U-TRU)Zr fuel. Reactivity swing is reduced to about 2447 pcm through fissile breeding compared to (U-TRU)Zr fuel option. Therefore, a required fusion power is reduced and tritium breeding performance is improved. However, transmutation performance with TRU nuclides especially $^{241}Am$ is degraded because of softening effect of spectrum. It is known that partitioning and transmutation should be accompanied with fusion-fission hybrid system for the effective transmutation of TRU.

• Transactions of Materials Processing
• /
• v.30 no.2
• /
• pp.61-68
• /
• 2021

As part of efforts to reduce the weight of automotive body-in-white, a hybrid center pillar with high strength 7075 aluminum alloy (AA7075) sheet and carbon fiber reinforced plastic (CFRP) has been recently studied. In the fabrication of the AA7075-CFRP hybrid center pillar, the AA7075 sheet might go through heating-forming-in-die quenching (HFQ), artificial aging, hybridizing, and then paint baking processes. In this study, we investigate the effects of the heat treatment history associated with each process on the tensile strength of the AA7075 sheet. Typical heat treatment conditions are HFQ for 20 minutes at 480℃ and then cooling down with die, artificial aging of T6 temper for 24 hours at 120℃, hybridizing for 10 minutes at 150℃, and paint baking for 20 minutes at 180℃. The tensile strength of the AA7075 sheet is continuously increased by a series of heat treatments of hybridizing and paint baking and is expected to have yield stress above 500MPa without artificial aging of T6 temper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.3
• /
• pp.163-171
• /
• 2013

Recently, the requirement of processing High Definition (HD) video or 3D application on low, mobile devices has been expanded and content data has been increased as well. It is becoming a major issue in Cloud computing where a Virtual Desktop Infrastructure (VDI) Service needs efficient data processing ability to provide Quality of Experience (QoE) in Cloud computing. In this paper, we propose three kind of Thick-Thin VDI Service which can share and delegate VDI service based on Thick Client using CPU and GPU. Furthermore, we propose and discuss the VDI Service Optimization Method in mixed CPU and GPU Heterogeneous Environment using CPU Parallel Processing OpenMP and GPU Parallel Processing CUDA.

• Composites Research
• /
• v.29 no.5
• /
• pp.269-275
• /
• 2016

Multiscale hybrid composites, which consist of polymeric resins, microscale fibers and nanoscale reinforcements, have drawn significant attention in the field of advanced, high-performance materials. Despite their advantages, multiscale hybrid composites show challenges associated with nanomaterial dispersion, viscosity, interfacial bonding and load transfer, and orientation control. In this paper, carbon nanotube(CNT)/carbon fiber(CF)/polycarbonate(PC) multiscale hybrid composite were fabricated by a solution process to overcome the difficulties associated with controlling the melt viscosity of thermoplastic resins. The dependence of CNT loading was studied by varying the method to add CNTs, i.e., impregnation of CF with CNT/PC/solvent solution and impregnation of CNT-coated CF with PC/solvent solution. In addition, hybrid composites were fabricated through surfactant-aided CNT dispersion followed by vacuum filtration. The morphologies of the surfaces of hybrid composites, as analyzed by scanning electron microscopy, revealed the quality of PC impregnation depends on the processing method. Dynamic mechanical analysis was performed to evaluate their mechanical performance. It was analyzed that if the position of the value of tan ${\delta}$ is closer to the ideal line, the adhesion between polymer and carbon fiber is stronger. The effect of mechanical interlocking has a great influence on the dynamic mechanical properties of the composites with CNT-coated CF, which indicates that coating CF with CNTs is a suitable method to fabricate CNT/CF/PC hybrid composites.

• Transactions of Materials Processing
• /
• v.19 no.8
• /
• pp.474-479
• /
• 2010

Newly suggested hybrid LED package can reduce the number of LED processes and enhance light efficacy in virtue of its integrated optical patterns. Square-type pyramid pattern was chosen for the integrated optical pattern in this study, and it was proved that the pattern enhances illuminance about three times and luminance about two and half times by optical simulation. Square-type pyramid patterns of 0.02mm height and 0.04mm pitch were successively machined on a copper mold which is necessary for imprinting the integrated pattern. Hybrid LED package with integrated optical pattern will be manufactured with ultra-fine machined mold in future study.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.6
• /
• pp.418-429
• /
• 2016

In this paper, we propose a hybrid Wyner-Ziv video coding structure that combines conventional motion predictive video coding and Wyner-Ziv video coding to eliminate the feedback channel, which is a major practical problem in applications using the Wyner-Ziv video coding approach. The proposed method divides a hybrid frame into two regions. One is coded by a motion predictive video coder, and the other by the Wyner-Ziv coding method. The proposed encoder estimates side information with low computational complexity, using the coding information of the motion predictive coded region, and estimates the number of syndrome bits required to decode the region. The decoder generates side information using the same method as the encoder, which also reduces the computational complexity in the decoder. Experimental results show that the proposed method can eliminate the feedback channel without incurring a significant rate-distortion performance loss.

• Laser Solutions
• /
• v.11 no.3
• /
• pp.21-24
• /
• 2008

Hybrid laser welding technology is a good process to reduce a thermal distortion and increase the productivity. However, it requires a high investment and a massive modification of the fabrication line such as a gantry system, milling machine for the edge preparation, high power laser system and weld machine. Therefore the development of an economical laser welding system is a crucial point to apply this system in shipbuilding yard. In this study, a portable hybrid laser welding carriage was developed for I-butt joint without edge milling. It is expected that the carriage type system could reduce investment cost.

• Transactions of Materials Processing
• /
• v.30 no.3
• /
• pp.119-124
• /
• 2021

In this study, the hybrid and roller hemming processes of aluminum alloy sheets were compared using the finite element analysis. The aluminum alloy 6014-T4 sheet with a thickness of 1 mm was used for the hemming process. The mechanical properties of the aluminum sheet obtained through a uniaxial tensile test were used for the simulation. The finite element analysis of hybrid and roller hemming was performed using a commercial software (ABAQUS) by the use of the mechanical properties. The finite element simulation results showed that the hybrid hemming holds an advantage over the roller hemming in terms of the dimensional accuracy

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.186-192
• /
• 2009

PID controllers are simple in structure and easy for implementation. However, they may produce large overshoots and over-oscillatory responses. Combining PID control with other control techniques often results in advanced hybrid schemes that are able to improve pure PID controllers. This paper proposes hybrid controller for position control system of servo motor. The proposed controller is composed of a subcontroller and a parallel PID controller. The subcontroller improves the transient system performance while the PID controller is mainly responsible for the steady-state system performance. A very promising advantage of this hybrid scheme, in terms of controller synthesis, is that the subcontrollers and controller components can be designed separately. Systematic design methods for various controller components are developed. The proposed hybrid scheme is applied to a DC motor position servo system. The effectiveness of the proposed controller is verified through the computer simulation results.