• 식물분류학회지
• /
• 제49권4호
• /
• pp.282-293
• /
• 2019

Broussonetia × kazinoki Siebold has long been utilized as a major component in the manufacturing of Korean traditional paper, hanji, and has been suggested as a hybrid species of B. papyrifera and B. monoica. By applying three molecular markers, chloroplast (cp) ndhF-rpl32 IGS, a nuclear ribosomal internal transcribed spacer, and the TOPO6 gene, the hybrid origin of B. × kazinoki is tested. As a result, B. × kazinoki in Korea is demonstrated to be a hybrid of B. monoica × B. papyrifera, most likely formed naturally in Korea. The cp haplotypes detected provided information about the origins and genetic diversity of the maternal lineage B. monoica and paternal lineage B. papyrifera. The two nuclear markers were supplemented to each other, leading to the discovery of introgression in Broussonetia.

• 식물분류학회지
• /
• 제46권4호
• /
• pp.378-391
• /
• 2016

돌나물과 한국특산종 태백기린초의 교잡 기원에 대한 가설을 검증하고, 연관 종들의 형태적, 유전적 변이를 알아보기 위해 40개 집단으로부터 18개의 형태형질과 35개 집단에 10개 동위효소 좌위를 분석하였다. 동위효소 연구결과 가는기린초, 기린초 그리고 속리기린초에 높은 빈도로 나타났던 $MDH-2^a$, $PGI-1^a$는 태백기린초 집단에서는 전혀 나타나지 않았으며, 태백기린초의 모든 집단에서 높은 빈도로 나타나는 $MDH-2^c$는 다른 가는기린초아속 식물에서는 낮은 빈도로 나타나고 있어 태백기린초가 기린초와 가는기린초의 잡종화를 통해 기원되었다는 기존의 가설을 지지할 수 없다. 그러나 금대봉 일대의 일부 집단의 개체들은 태백기린초와 기린초 혹은 기린초와 가는기린초 사이에서 형질이입에 의해 만들어진 교잡 개체일 가능성이 높은 것으로 생각된다.

• Mycobiology
• /
• 제34권2호
• /
• pp.92-98
• /
• 2006

A total of 34 species belonging to 21 genera of fungi were recorded on passion fruits of both pure and hybrid origin in Uganda, however, the pure type exhibited wider spectrum (28 species and 16 genera) than the hybrid type (21 & 15). Also, yeasts (unidentified and Rhodotorula mucilaginosa) were also encountered in high numbers. Moreover, the mean count of all mycobiota obtained from the pure type was higher than that of hybrid, despite the bigger size of the later. Members of yeasts and Cladosporium followed by Phoma, Penicillium, Fusarium and Alternaria species dominated on passion fruits of pure origin, while only C. cladosporioides, F. solani and yeasts dominated on the hybrid type. Treatment with Na-hypochlorite exhibited inhibitory effects on the total mycobiotic propagules as well as the dominant species from fruits of both types. The current results, therefore, suggest the use of Na-hypochlorite to control the post-harvest mycobiota associated with passion fruits. Regarding the mycobiota contaminating passion juice, yeasts were found to be the major contaminants with Candida parapsilosis being the most common. Moulds constituted only a minor proportion with Acremonium strictum followed by Fusarium chlamydosporum, F. moniliforme, F. acuminatum and F. solani as the most dominant species. In the heat-treated juice samples, the counts of the most commonly encountered mycobiota (both yeasts and molds) were significantly inhibited or completely eliminated. Some unidentified Bacillus species were also recovered from the juice, however, their counts in the heated samples were increased but insignificantly.

• 식물분류학회지
• /
• 제49권2호
• /
• pp.127-139
• /
• 2019

The purported four hybrid origins of Asplenium in Korea were tested based on morphological, cytological and DNA sequence data. Asplenium castaneo-viride, A. ${\times}$ uiryeongse, A. ${\times}$ montanus, and A. ${\times}$ kitazawae share several morphological characteristics with the Asian walking fern A. ruprechtii and related taxa as parents and show a sympatric distribution with the putative parents, raising the possibility of hybrid origins: A. castaneo-viride (A. ruprechtii and A. incisum), A. ${\times}$ uiryeongse (A. ruprechtii and A. pekinense), A. ${\times}$ montanus (A. ruprechtii, A. trichomanes, and A. incisum), and A. ${\times}$ kitazawae (A. ruprechtii and A. sarelii). We investigated flow cytometry and chloroplast DNA sequence data (rbcL, rps4-trnS, and rps4-trnS intergenic spacer) to clarify the hybridization and origin of each hybrid. In the flow cytometry analyses, A. ruprechtii shows diploid (2x) only, whereas A. castaneo-viride (3x, 4x), A. ${\times}$ uiryeongse (3x), A. ${\times}$ montanus (3x, 4x), and A. ${\times}$ kitazawae (2x, 4x) exhibit polyploidy, suggesting hybrid events along speciation. The rbcL and rps4-trnS and rps4-trnS intergenic spacer data suggest that A. ruprechtii is one the maternal ancestors of all four hybrids. In addition, the rps4-trnS and rps4-trnS intergenic spacer data indicate that A. incisum is also the maternal ancestor of A. ${\times}$ kitazawae and A. ${\times}$ montanus, proposing multiple hybridization events for these two hybrids. In A. ${\times}$ montanus, morphological features such as the leaf forms and sympatric distributions of the species also support the multimaternal hypothesis, but the morphological features of A. ${\times}$ kitazawae must be examined with consideration of hybrid events. To clarify the complex hybrid evolutionary lineages of the four Asplenium hybrids, further research with taxon sampling and molecular markers should be conducted.

• 식물분류학회지
• /
• 제52권2호
• /
• pp.85-96
• /
• 2022

홍도고들빼기는 이전 연구에서 형태적 특성과 지리적 분포를 바탕으로 이고들빼기와 갯고들빼기의 잡종인 Crepidiastrum ×muratagenii로 제안된 바 있지만, 이에 대한 분자적 증거를 제시하지 못하였다. 본 연구는 홍도고들빼기의 잡종 기원을 밝히기 위하여 홍도고들빼기와 그 근연종의 추가적인 형태적 형질을 관찰하였으며, 핵리보솜 internal transcribed spacer (ITS) 구간과 엽록체 구간(trnT-L, trnL-F, rpl16 intron, rps16 intron)의 염기서열을 비교·분석하였다. 형태적 특성을 검토한 결과, 잡종형은 생육형, 줄기잎, 외총포편, 수과의 특성을 바탕으로 세 가지 유형으로 구분되었다. 분자 분석 결과, Type 1형과 Type 2형은 ITS 구간의 종식 별부위에서 혼성화가 관찰되었으며, 엽록체 구간에서는 Type 1형은 이고들빼기, Type 2형은 갯고들빼기 서열이 각각 관찰되었다. Type 3형은 ITS와 엽록체 구간 모두 이고들빼기와 동일한 서열을 보였다. Type 1형과 Type 2형은 이고들빼기와 갯고들빼기의 형태가 혼합되어 나타날 뿐 아니라, 분자 분석에서도 절영풀이 아닌, 갯고들빼기와 이고들빼기의 종식별부위에서 혼성화가 관찰되어 이고들빼기와 갯고들빼기의 잡종임을 지지하였다. 그러나 Type 3형은 형태적 형질이 다른 잡종형과 유사하나 외총포편이 이고들빼기와 유사한 점에서 구분되며, 분자 분석에서도 이고들빼기 서열과 동일하여, 이고들빼기의 생태변이로 판단되었다.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.464-471
• /
• 2013

This paper proposes a hybrid searching algorithm based on parameter identification for power system load models. Hybrid searching was performed by the combination of particle swarm optimization (PSO) and a complex method, which enhances the convergence of solutions closer to minima and takes advantage of global searching with PSO. In this paper, the load model of interest is composed of a ZIP model and a third-order model for induction motors for stability analysis, and parameter sets are obtained that best-fit the output measurement data using the hybrid search. The origin of the hybrid method is to further apply the complex method as a local search for finding better solutions using the selected particles from the performed PSO procedure.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.138-148
• /
• 1998

The aim of the work described in this paper is to develop a complex underground acoustic system which detects and localizes the origin of an underground hammering sound using an array of hydrophones located about loom underground. Three different methods for the sound localization will be presented, a time-delay method, a power-attenuation method and a hybrid method. In the time-delay method, the cross correlation of the signals received from the way of sensors is used to calculate the time delays between those signals. In the power-attenuation method, the powers of the received signals provide a measure of the distances of the source from the sensors. A new hybrid method has been developed for estimating the origin of the underground acoustic source by coupling both methods. The Nelder-Meade simplex search algorithm is then used to numerically estimate the position of the source in those methods. For each method the sound localization is carried out in three dimensions underground. The distance between the true and estimated origins of the source is in some cases less than 6m for a search area of radius 250m.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 1호
• /
• pp.103-108
• /
• 1999

The aim of the work described in this paper is to develop a complex underground acoustic system which detects and localizes the origin of an underground hammering sound using an array of hydrophones located about loom underground. Three different methods for the sound localization will be presented, a time-delay method, a power-attenuation method and a hybrid method. In the time-delay method, the cross correlation of the signals received from the array of sensors is used to calculate the time delays between those signals. In the power-attenuation method, the powers of the received signals provide a measure of the distances of the source from the sensors. In the hybrid method, both informations of time-delays and power-ratios are coupled together to produce better performance of position estimation. A new acoustic imaging technique has been developed for improving the hybrid method. This new acoustic imaging method shows the multi-dimensional distribution of the normalized cost function, so as to indicate the trend of the minimizing direction toward the source location. For each method the sound localization is carried out in three dimensions underground. The distance between the true and estimated origins of the source is 28m for a search area of radius 250m.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권4호
• /
• pp.507-514
• /
• 2012

The present study is the analyses of what has been attempted and what was understood in terms of improving the regression rate and enlarging the basic understanding of internal flow dynamics. The first part is mainly intended to assess the role of helical grain configuration in the regression rate inside the hybrid rocket motor. To improve the regression rate, a combination of swirl (which is an active method) and helical grain (which is a passive method) was adopted. The second part is devoted to the internal flow dynamics of hybrid rocket combustion. A large eddy simulation was also performed with an objective of understanding the origin of isolated surface roughness patterns seen in several recent experiments. Several turbulent statistics and correlations indicate that the wall injection drastically changes the characteristics of the near-wall turbulence. Contours of instantaneous streamwise velocity in the plane close to the wall clearly show that the structural feature has been significantly altered by the application of wall injection, which is reminiscent of the isolated roughness patterns found in several experiments.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.190.2-190.2
• /
• 2014

We report the origin of the improvement of the power conversion efficiency (PCE) of hybrid thin-film solar cells when a soluble C60 derivative, [6,6]-phenyl-$C_{61}$-butyric acid methyl ester (PCBM), is introduced as a hole-blocking layer. The PCBM layer could establish better interfacial contact by decreasing the reverse ark-saturation current density, resulting in a decrease in the probability of carrier recombination. The power conversion efficiency of this optimized device reached a maximum value of 8.34% and is the highest yet reported for hybrid thin-film solar cells.