• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.439-439
• /
• 2009

Nowadays, source of MEMS, USN, Hybrid parts pay attention to energy harvesting. On this paper, energy harvesting was studied using piezoelectric effect. And, piezoelectric generator was designed and fabricated. Generators were designed by FEM simulation program and generators were made by attaching cymbal type metal plates on upper and bottom sides of a disc type piezoelectric ceramic. Output AC power was rectified to DC power by full bridge circuit and converted to regular voltage power by DC-DC converter. The final output power was charged to Ni-Cd battery. Using fabricated generators, output voltages dependant on thickness of ceramic, displacement of vibration, frequency of vibration were measured.

• Journal of the Korean Society for Railway
• /
• v.10 no.1 s.38
• /
• pp.39-44
• /
• 2007

This rafer explains a durability test of a large train car body made of carbon/epoxy composite material. The composite car body with the length of 23m was manufactured as a sandwich structure composed of an aluminum honeycomb core and CF1263 woven fabric carbon/epoxy faces. In order to evaluate durability of the composite car body, it was excited by two 500kN capacity hydraulic actuators installed underneath the body bolster. The natural frequency of the composite car body under full weight condition was found to be 4.33Hz. Based on this result, the excitation frequency and displacement of 5Hz and ${\pm}1.0mm$, respectively, were used as inputs for the durability test. The test was conducted for $2{\times}10^6$ cycles. During the test, the nondestructive tests using X-ray radiography and dye penetration method was performed to determine the presence of the cracks. Upon completion of the test, no cracks were found.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1193-1195
• /
• 2004

Ozone gas is one of the strongest oxidizing and bleaching agents which leave no residues harmful to the global environment. In recent years, the ozone generator has been widely utilized, However, it has been known that a broader application of ozone is hindered primarily because of its low efficiency of generation. Thus, it is more indispensable to improve actual system efficiency of the silent discharge type ozonizer using high frequency inverter. This paper presents a multi level resonant ozone power regulation by association of high frequency transformers and full bridge invert. And proposed resonant inverter system can generate continuous output voltage. can control linearly quantity of ozone gas. This invert that add PWM forms within square forms of output voltage about one level range. The power regulation characteristics and operating performances of silent discharge (SD)type ozone generating tube load driven by this load proposed inverter using FET modules are illustrated from a practical point of view, which can operate under stable conditions of basic level and PWM hybrid control strategy implemented DSP(2406). The effectoveness of propsed invert type ozonizer is proved by experiment results.

• Korean Journal of Plant Resources
• /
• v.21 no.2
• /
• pp.111-116
• /
• 2008

This study was carried out to induce plant regeneration via multiple shoot formation from sucker explants of Rubus fruticosus L. ${\times}$ R. parvifolius L. To induce adventitious shoots, the sucker explants were sterilized in 1.2% sodium hypochlorite (NaOCl) solution, and then were cultured on the full and 1/2 MS solid medium supplemented with BA (0.1, 0.5, 1.0, $2.0mg{\cdot}L^{-1}$). After 4 weeks of culture, the highest frequency (83.3%) of shoot formation from sucker explants was obtained from the full MS medium with $1.0mg{\cdot}L^{-1}$ BA. The highest shoot number (3.7) per explant was obtained from the full MS medium with $0.5mg{\cdot}L^{-1}$ BA. After 12 weeks of culture, the number of shoots (15.4) per explant was increased. The highest frequency (95%) of root formation was obtained from the 1/2 MS medium, when the explant with shoot were cultured on the full, 1/2 and 1/4 MS medium. The survival rate of the plantlets after transfer to plastic pots containing sand, soil, and vermiculite (1.1:1, vol.) was 95%. The results indicate that multiple shoot procedure can be applied for an efficient mass propagation of Rubus fruticosus L. ${\times}$ R. parvifolius L.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.2
• /
• pp.165-170
• /
• 2006

Using the somatic cell hybrid panel (SCHP) and radiation hybrid (IMpRH) panel, porcine SOCS2 gene was mapped at SSC5 (1/2) q21-q24 and closely linked with SW1383 marker (47 cR in distance), while SOCS3 gene was assigned to SSC12p11-(2/3p13) and closely linked with SW2490 (43 cR). The reverse transcriptase-polymerase chain reaction (RT-PCR) was performed to detect the expression of these two genes in the different tissues and the results showed that both SOCS2 and SOCS3 genes were widely expressed in tissues investigated (heart, liver, spleen, lung, kidney skeletal muscle, fat and brain), although some tissues showed lower gene expression. Moreover, SOCS2 and SOCS3 genes had different expression levels at different stages, in different tissues and in different breeds. A G/A substitution, which can be recognized by restriction enzyme of Cfr421, was observed in 5' untranslated region (5'-UTR) of SOCS2 gene. The allele frequencies was investigated by PCR-restriction fragment length polymorphism (PCR-RFLP) method and it showed that the allele frequency among Dahuabai, Erhualian, Yushan, Qingping, Large white and Landrace tested were different. Association analysis in a cross experimental populations revealed no significant association between the SOCS2 gene polymorphism and the economic traits investigated. The full-length coding regions (CDs) of porcine SOCS3 gene was obtained by RT-PCR.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.8
• /
• pp.730-739
• /
• 2015

In this paper, a wideband circular polarizer operating in the frequency range of 6~18 GHz is designed and fabricated using a multilayer structure with meanderlines. A T matrix expression for the unit structure, which consists of meanderline, dielectric substrate and spacer, was derived using the boundary value solution. A proposed meanderline structure was modeled as an array of unit meanderline cell in order to apply the waveguide model with PEC and PMC boundary conditions. The calculation procedures to obtain an equivalent susceptance of the unit meanderline cell using HFSS was also suggested. Using a hybrid method, which combines the T matrix with the HFSS results, and cut-and-try method, a wideband circular polarizer with low insertion loss and good AR performance was designed. The fabricated polarizer has the return loss less than -10 dB within 92 % bandwidth, the average insertion loss less than -0.24 dB, and the average AR below 2.6 dB for full 3:1 bandwidth.

• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.200-211
• /
• 2017

Conventional boost-full-bridge and boost-hybrid-bridge two-stage inverters are widely applied in order to adapt to the wide dc input voltage range of photovoltaic arrays. However, the efficiency of the conventional topology is not fully optimized because additional switching losses are generated in the voltage conversion so that the input voltage rises and then falls. Moreover, the electrolytic capacitors in a dc-link lead to a larger volume combined with increases in both weight and cost. This paper proposes a higher efficiency inverter with time-sharing synchronous modulation. The energy transmission paths, wheeling branches and switching losses for the high-frequency switches are optimized so that the overall efficiency is greatly improved. In this paper, a contrastive analysis of the component losses for the conventional and proposed inverter topologies is carried out in MATLAB. Finally, the high-efficiency under different switching frequencies and different input voltages is verified by a 3 kW prototype.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.4 s.97
• /
• pp.492-498
• /
• 2005

A linear motor damper based on the linear motor principle is developed to suppress structural vibration. This paper deals with the design, analysis, and manufacture of the linear motor damper. It is designed to be able to move the auxiliary mass of 1500kg, up to $\pm250mm$ stroke. The control algorithm was designed based on LQG control logic with acceleration feedback. Through performance tests, it was confirmed that the developed hybrid mass damper has reliable feasibility as a control device for structural control. In addition, the linear motor damper is more economical than both hydraulic and electric motor driving mass damper with respect to simple structure and low maintenance cost. A series of performance tests of the linear motor damper system were carried out on the full-scale steel frame structure in UNISON Corporation. Through the performance tests, it was confirmed that acceleration levels are reduced down 10dB for first mode of structure

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.6
• /
• pp.424-432
• /
• 2018

This study presents a single-phase single-stage three-level AC/DC converter with a wide controllable output voltage. The proposed AC/DC converter is designed to extend the application of e-mobility, such as electric vehicles. The single-stage converter integrates a PFC converter and a three-level DC/DC converter, operates at a fixed frequency, and provides a wide controllable output voltage (approximately 200-430Vdc) with high efficiencies over a wide load range. In addition, the input boost inductors operate in a discontinuous mode to improve the input power factor. The switching devices operate with ZVS, and the converter's THD is small, especially at full load. The feasibility of the proposed converter is verified by the experimental results of a 1.5 kW prototype.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.9
• /
• pp.1319-1326
• /
• 2007

Fructose-1,6-bisphosphatase (FBP1) is a key regulatory enzyme of gluconeogenesis that catalyzes the hydrolysis of fructose-1,6-bisphosphate to generate fructose-6-phosphate and inorganic phosphate. Deficiency of fructose-1, 6-bisphosphatase is associated with fasting hypoglycemia and metabolic acidosis. The enzyme has been shown to occur in bacteria, fungi, plants and animals. The bovine FBP1 gene was cloned and characterized in this study. The full length (1,241 bp) FBP1 mRNA contained an open reading frame (ORF) encoding a protein of 338 amino acids, a 63 bp 5' untranslated region (UTR) and a 131 bp 3' UTR. The bovine FBP1 gene was 89%, 85%, 82%, 82% and 74% identical to the orthologs of pig, human, mouse, rat and zebra fish at mRNA level, and 97%, 96%, 94%, 93% and 91% identical at the protein level, respectively. This gene was broadly expressed in cattle with the highest level in testis, and the lowest level in heart. An intronic single nucleotide polymorphism (SNP) (A/G) was identified in the $5^{th}$ intron of the bovine FBP1 gene. Genotyping of 133 animals from four beef breeds revealed that the average frequency for allele A (A-base) was 0.7897 (0.7069-0.9107), while 0.2103 (0.0893-0.2931) for allele B (G-base). Our preliminary association study indicated that this SNP is significantly associated with traits of Average Daily Feed Intake (ADFI) and Carcass Length (CL) (p<0.01). In addition, the FBP1 gene was assigned on BTA8 by a hybrid radiation (RH) mapping method.