• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1273-1280
• /
• 2003

In this paper, transparent dynamic photoelastic experimental hybrid method for propagating cracks in orthotropic material was developed. Using transparent dynamic photoelastic experimental hybrid method, we can obtain stress intensity factor and separate the stress components from only isochromatic fringe patterns without using isoclinics. When crack is propagated with constant velocity, the contours of stress components in the vicinity of crack tip in orthotropic material are similar to those of isotropic material or orthotropic material with stationary crack under the static load. Dynamic stress intensity factors are decreased as crack growths. It was certified that the dynamic photoelastic experimental hybrid method was very useful for the analysis of the dynamic fracture mechanics.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.466-472
• /
• 2013

This paper presents a new design of the hybrid magnet engine valve actuator using the shorted turn for enhanced dynamic performance. The quick response of coil electric current is the most important factor that determines the opening and closing performance of the hybrid magnet engine valve. The conventional hybrid magnet engine valve actuator, however, has a delayed initial electric current rising when it is driven by voltage control because of the coil inductance which is a typical characteristic of an electromagnetic coil. A shorted turn is newly placed into the upper yoke of the hybrid magnet engine valve actuator to reduce coil inductance and thus, to hasten the initial electric current rising. We performed a dynamic finite element analysis to demonstrate the improvement of the dynamic characteristics of the hybrid magnet engine valve actuator due to the shorted turn.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.114-120
• /
• 2013

An EP(Electrolytic Polishing)-MAP(Magnetic Abrasive Polishing) hybrid process was applied to remove burr on the micro pattern. Micro pattern fabrication processes are combined with micro milling and EP-MAP hybrid process for deburring. Depending on the micro milling conditions which are applied, micro burrs are formed around the side and top of the pattern. The EP-MAP deburring is used to remove these burrs effectively. To optimize removal rate and form error in the EP-MAP hybrid process, a design of experiment was performed. The effect of deburring process and form error of micro pattern are evaluated via SEM images and the results of AFM.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권2호
• /
• pp.113-120
• /
• 2019

We have developed 1 kW-class PEMFC-battery hybrid system independently powering to the building, through the process of system design, current load characteristics analysis, power system configuration for demonstration site and performance evaluation. In order to use the fuel cell and battery as the hybrid type, a control technology for the charging/discharging decision and charging speed of the battery is required rather than using fuel cell. Also output power distribution between PEMFC and the battery is a core of energy management technology. It is confirmed that it is possible to supply independently 1kW powering the building to ensure optimal energy management through the power control experiment of the hybrid system.

• 한국경영과학회지
• /
• 제25권3호
• /
• pp.125-135
• /
• 2000

Many different statistical and artificial intelligent techniques have been applied to improve the predictability of credit rating. Hybrid models and systems have also been developed by effectively combining different modeling processes or combining the outcomes of individual models. In this paper, we introduced the rough set theory and developed a hybrid credit rating system that combines individual outcomes in terms of rough set theory. An experiment was conducted to compare the prediction capability of the system with those of other methods. The proposed system based on rough set method outperformed the others.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제1권1호
• /
• pp.87-94
• /
• 2001

Silicon nitride films grown by plasma-enhanced chemical vapor deposition (PECVD) are useful for a variety of applications, including anti-reflecting coatings in solar cells, passivation layers, dielectric layers in metal/insulator structures, and diffusion masks. PECVD systems are controlled by many operating variables, including RF power, pressure, gas flow rate, reactant composition, and substrate temperature. The wide variety of processing conditions, as well as the complex nature of particle dynamics within a plasma, makes tailoring SiN film properties very challenging, since it is difficult to determine the exact relationship between desired film properties and controllable deposition conditions. In this study, SiN PECVD modeling using optimized neural networks has been investigated. The deposition of SiN was characterized via a central composite experimental design, and data from this experiment was used to train and optimize feed-forward neural networks using the back-propagation algorithm. From these neural process models, the effect of deposition conditions on film properties has been studied. A recipe synthesis (optimization) procedure was then performed using the optimized neural network models to generate the necessary deposition conditions to obtain several novel film qualities including high charge density and long lifetime. This optimization procedure utilized genetic algorithms, hybrid combinations of genetic algorithm and Powells algorithm, and hybrid combinations of genetic algorithm and simplex algorithm. Recipes predicted by these techniques were verified by experiment, and the performance of each optimization method are compared. It was found that the hybrid combinations of genetic algorithm and simplex algorithm generated recipes produced films of superior quality.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1229-1236
• /
• 2004

The specimen materials used in this research are isotropic epoxy resins. The static photoelastic experiment was applied to them. And then the specimens used in photoelastic experiment were fractured under static load. The static photoelastic experimental hybrid method was introduced and its validity had been assured. Crack propagation criterion used the stress components, which are considered the higher order terms, obtained from the static photoelastic experimental hybrid method was introduced and it was applied to the minimum strain energy density criterion, the maximum tangential stress criterion and mode mixity. Comparing the actual initial angle of crack propagation with the theoretical initial angle of crack propagation obtained from the above failure criterions, the validities of the above two criterions are assured and the optimal distance (r) from the crack-tip is 0.01mm in order to get the initial angle of crack propagation of isotropic epoxy resin.

• Plant Resources
• /
• 제8권3호
• /
• pp.281-285
• /
• 2005

In order to select suitable fertilizer level and sowing rate of Dangyo $^{#8}$(hybrid) rapeseed at the southern area of Korea, two varieties of Naehanyuchae (Normal) and Dangyo $^{#8}$(hybrid) rapeseed currently grown for oil production by two fertilizer level with 10-8-8 kg/10a and 15-8-8 kg/10a and three sowing rate with 500 g/10a, 1,000g/10a and 1,500g/10a with relatively high yield was grown at the same condition yield and yield components were observed. Dangyo $^{#8}$(hybrid) rapeseed was superior to oil-eed rapeseed for yield at the 15-8-8 kg/10a of fertilizer and 1,500 g/10a of sowing rate. Fertilizer level, $N-P_{2}O_5-K_{2}O$ = 15-8-8 kg/10a and sowing rate, 1,500 g/10a showed somewhat higher value in two varieties of Naehanyuchae(Normal) and Dangyo $^{#8}$(hybrid).

• 한국작물학회지
• /
• 제45권5호
• /
• pp.343-346
• /
• 2000

Rye breeding using F$_1$ hybrid began about 30 years ago, when cytoplasmically inherited forms of male sterility (CMS) and corresponding nuclear restorers were detected. It is very important to produce inbred lines for making hybrid lines because of strong self-incompatibility in rye. Among the 456 rye germplasms used in hybrid breeding scheme, 24 lines (5.3%) had the above 60% of self-fertility, and six lines of them were selected for their good agronomic characteristics and were used for subsequent inbreeding program. The average self-fertility of selected six lines was 78.4%, ranging from 72.2 to 99.5%. Genetic analysis for the self-fertility using $F_2$ populations showed that the segregation of self-fertile and sterile plants in F$_2$populations could be fit into 3 to 1 ratio suggesting self-fertility in rye be controlled by one major gene. The four different self-fertile lines, PI237923, 5C11, 5G5 and Florida black, had the same self-fertility gene because their F$_2$ plants showed almost the same self-fertility as their parents and showed no genetic segregation.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1799-1806
• /
• 2004

The static photoelastic experiment was applied to orthotropic materials. And then the specimens used in photoelastic experiment were fractured under static load. The static photoelastic experimental hybrid method for orthotropic material was introduced and its validity had been assured. Crack propagation criterion used the stress components, which are considered the higher order terms, obtained from the static photoelastic experimental hybrid method was introduced and it was applied to the minimum strain energy density criterion, the maximum tangential stress criterion and mode mixity. Comparing the actual initial angle of crack propagation with the theoretical initial angle of crack propagation obtained from the above failure criterions, the validities of the above two criterions are assured and the optimal distance (${\gamma}$) from the crack-tip is 0.01mm in order to get the initial angle of crack propagation of orthotropic material(C.F.E.C.).