• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.1
• /
• pp.38-41
• /
• 1985

The hybrid design which is to take IIR filter of the first stage as a second order pole-zero model and minimize the filter length of the of the FIR filter of the following stage is presented. The outcome of the simulation showed us that the the filter length in the hybrid filters was remarkably decreased compared to that of the hybrid filters which take the IIR filter as a all-pole model. Although the hybrid filters couldn't obtain the exact linear phase. it was superior to the IIR filters in passband and stopband.

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.274-281
• /
• 2007

In this paper, we present a hybrid multi-antenna technique that can minimize the outage probability by combining the diversity and beamforming techniques. The hybrid technique clusters the transmission antennas into multiple groups and exploit diversity among different groups and beamforming within each group. We analyze the performance of the resulting hybrid technique for an arbitrary correlation among the transmission antennas. Through the performance analysis, we derive a closed-form expression of the outage probability for the hybrid technique. This enables to optimize the antenna grouping for the given spatial correlation. We show through numerical results that the hybrid technique can balance the trade-offs between diversity and beamforming according to the spatial correlation and that the optimally designed hybrid technique yields a much lower outage probability than the diversity or beamforming technique does in partially correlated fading channels.

• Current Photovoltaic Research
• /
• v.3 no.4
• /
• pp.116-120
• /
• 2015

A hybrid transparent conducting layer was applied for Si photodetector. To realize the hybrid transparent conducting layer, a 200 nm-thick ITO layer was deposited onto a Si substrate, following by a solution-processed AgNWs-coating on the ITO. The hybrid transparent conducting layer showed an excellent low electric resistance of $15.9{\Box}/{\Omega}$ with a high optical transparency of 86.89%. Due to these optical and electrical benefits, the hybrid transparent conductor-embedding Si diode provides an extremely high rectifying ratio of 3386. Under light-illumination, the hybrid transparent conductor device provides extremely high photoresponses for broad wavelengths. This implies that a functional design for hybrid transparent conductor is crucial for photoelectric devices and applications.

• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.365-373
• /
• 2010

This paper proposes a hybrid single carrier sinusoidal modulation suitable for multiphase multilevel inverters. Multiphase multilevel inverters are controlled by hybrid modulation to provide multiphase variable voltage and a variable frequency supply. The proposed modulation combines the benefits of fundamental frequency modulation and single carrier sinusoidal modulation (SC-SPWM) strategies. The main characteristics of hybrid modulation are a reduction in switching losses and improved harmonic performance. The proposed algorithm can be applied to cascaded multilevel inverter topologies. It has low computational complexity and it is suitable for hardware implementations. SC-SPWM and its base modulation design are implemented on a TMS320F2407 digital signal processor (DSP). A Complex Programmable Logic Device realizes the hybrid PWM algorithm and it is integrated with a DSP processor for hybrid SC-SPWM generation. The feasibility of this hybrid modulation is verified by spectral analysis, power loss analysis, simulation and experimental results.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.9
• /
• pp.14-19
• /
• 2008

• Biomedical Science Letters
• /
• v.11 no.1
• /
• pp.51-56
• /
• 2005

The detection of high-risk human papilloma virus (HPV) allows us to predict the presence and future development of cervical intraepitheliallesion. In this study, we compared Hybrid Capture II and DNA chip methods for detection of HPV in cervical swab samples. And we evaluated the clinical efficacy and diagnostic performance of HPV DNA chip and Hybrid Capture II for detecting HPV in cervical neoplastic lesions. Seventy four patients were classified into three groups according to their histologic diagnosis: Group I (nonspecific chronic cervicitis), Group II (low-grade squamous intraepithelial lesion (SIL); koilocytosis, and mild dysplasia), and Group III (high-grade SIL;, moderate, severe dysplasia and in situ carcinoma). Cytologic diagnosis were based on the Bethesda System. Hybrid Capture II and DNA chip methods were performed to detect HPV. In 41 of the 74 cervical samples $(55.4\%)$, HPV DNAs were detected by Hybrid Capture II. In Group III, HPV-positive cases were detected in 15 $(20.3\%)$ of 74 patients by Hybrid Capture II. 25 patients with ASCUS cytology were histopathologically examined: 9 cases $(36\%)$ were Group II. In 18 patients with low-grade SIL cytology, 13 cases $(72.2\%)$ were Group II and 3 cases $(16.7\%)$ were Group III. 12 cases $(92.3\%)$ were Group ill of 13 patients with high-grade SIL cytology. The sensitivity of each test was $82\%$ in Hybrid Capture II and $53.9\%$ in DNA chip test. And the specificity was $74.3\%,\;85.7\%$ in Hybrid Capture II and DNA chip. In conclusion, Hybrid Capture II test is more sensitive than DNA chip in detecting women with cervical neoplastic lesions. Especially, in diagnosing of ASCUS, Hybrid Capture II test is more sensitive. Therefore, Hybrid Capture II test for cancer-associated HPV DNA is a viable option in the management of women with ASCUS.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.213-219
• /
• 2009

This study was carried out to establish breeding system for interspecific hybridization of Lilium using spontaneous meiotic polyploidization of $F_1$ OA hybrid and its progenies. Pollen viability and germination of $F_1$ OA interspecific hybrid showed variation by collection time, indicating that pollen grain in June, which was natural blooming season, had better viability and germination ability than in October. 2n-gametes from spontaneous meiotic polyploidization of OA hybrid were crossed with either diploid Asiatic or Oriental hybrid, and subsequent progenies crossed with Asiatic hybrid as female and OA hybrid as male showed the highest efficiency, where 2x-2x A$\times$OA produced 0.64 plants per cross combination, while 2x-2x, O$\times$OA and 2x-2x, OA$\times$A crosses produced 0.42 and 0.4 plant per ovary, and especially no progeny was obtained in 2x-2x, OA$\times$O cross combination. For the subsequent progeny production, a cross between diploid Asiatic hybrid as female and diploid OA hybrid as male was the best ploidy combination. Ploidy level of subsequent progeny derived from backcross with 2n-gametes of OA hybrid revealed that triploids from 2x-2x OA$\times$A, tetraploids from both 4x-2x, AA$\times$OA and OO$\times$OA, diploid from 2x-2x, O$\times$OA, and diploids or triploids from 2x-2x, A$\times$OA crosses were produced respectively.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.53-58
• /
• 2017

FRP Hybrid Bar, composed of an embedded steel and the coated composites with epoxy and glass fiber, is an effective construction material with tension-hardening performance and lightweight. The epoxy exposed to UV(Ultra Violet Rays) and FT(Freezing and Thawing) action easily shows a surface deterioration, which can cause degradation of bonding strength between inside-steel and outside-concrete. In the present work, surface inspection for 3 different samples of normal steel, FRP Hybrid Bar before UV, and FRP Hybrid Bar after UV test was performed, then concrete samples with 3 reinforcement types were prepared for accelerated FT test. Through visual inspection on 3 typed reinforcement, no significant deterioration like chalking was evaluated. The results from FT test to 120 and 180 cycles showed FRP Hybrid Bar exposed to UV test has higher bonding strength than normal steel by 106.3% due to enlarged bond area by silica coating. The 3 cases showed a similar bond strength tendency with increasing FT cycles, however a relatively big deviations of bond strength were evaluated in FRP Hybrid Bar after UV test due to loss of silica coating.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.118-125
• /
• 2017

In this study, we examined the bond performance of FRP Hybrid Bars. FRP Hybrid Bars are developed by wrapping glass fibers on the outside of deformed steel rebars to solve the corrosion problem. The surface of the FRP Hybrid Bars was coated with resin and silica sand to enhance its adhesion bonding performance with concrete. Various parameters, such as the resin type, viscosity, and size of the silica sand, were selected in order to find the optimal surface condition of the FRP Hybrid Bars. For the bonding test, FRP Hybrid Bars were embedded in a concrete block with a size of 200 mm3 and the maximum load and slip were measured at the interface between the FRP Hybrid Bar and concrete through the pull-out test. From the experimental results, the maximum load and bond strength were calculated as a function of each experimental variable and the resin type, viscosity and size of the silica sand giving rise to the optimal bond performance were evaluated. The maximum bond strength of the specimen using epoxy resin and No. 5 silica sand was about 35% higher than that of the deformed rebar.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.spc3
• /
• pp.282-288
• /
• 2012

Proton exchange membrane fuel cell (PEMFC) is the most promising energy source for the robot applications because it has unique advantages such as high energy density, no power drop during operating, and easy to make compact size. However, PEMFC has intrinsic disadvantages which are delay to start up and difficulty to correspond drastic load changes. These disadvantages can be compensated by hybrid operating with a Li-poly battery. This study is focus to build and understand the hybrid system for the robot system. In this study, we build the PEMFC hybrid system using EOS-320 PEMFC stack, Li-poly battery and G-Philos FDX1-250BU dc-dc converter. The hybrid system is accurately monitored by CAN and RS485. The system was studied under two conditions such as non-loaded and loaded operating conditions. The results show that the system has delay to start up without hybrid operating and it can be compensated with the hybrid operating.