• 한국약용작물학회지
• /
• 제17권5호
• /
• pp.321-327
• /
• 2009

Sunlight, and in particular its UV component, is the major environmental trigger that underlies the major signs of human skin and skin cancer in general. Therefore, this study was carried out to investigate the UV protection effects of R. coreanus. R. coreanus was extracted by ultra high pressure extraction process at 500 MPa and $30^{\circ}C$ for 5 and 15 minutes. The cytotoxicity of the extracts extracted by ultra high pressure process on human dermal fibroblast cell CCD-986sk, human kidney normal cell HEK293, and human lung normal cell HEL299 was measured as 17.5%, 16.5% and 14.0%, respectively in adding $1.0\;mg/m{\ell}$ of the samples, which was much lower than that from conventional water extraction method at $100^{\circ}C$ as 23.2%, 22.5%, 21.2%. The secretion of $NO^-$ from macrophage showed $15.9\;{\mu}M$ on the R. coreanus extract from this process, which was higher than others. Prostaglandin $E_2$ ($PGE_2$) production from UV-induced human skin cells was also greatly decreased down to $510\;pg/m{\ell}$, compared to the control. From the results, we considered that the extracts from R. coreanus could be potent natural materials for skin anti-inflammation agent, and could be used as a potential anti-aging for the photo-damaged skin.

• 정보학연구
• /
• 제8권1호
• /
• pp.43-50
• /
• 2005

Quantitative analysis for distribution of penetrating ultrasound in vivo is very important to determine the treatment region and method. In this paper, we constructed a simplified 2-D femoral region model that consists of skin-fat-muscle-bone layered system, and simulated the pressure distribution in the model in case of applying ultrasound using Finite Element Method(FEM). The ultrasound used in the simulation was assumed to be pulse wave and the pressure distribution was analyzed during only one period of pulse wave. In order to find the penetration depth, amplitude of pressure and sphere that ultrasound reaches in the model, we performed the simulation with varying the applied frequency, transducer size and amplitude of transducer's output. The result showed that applied frequency is inversely proportional to the penetration depth and amplitude of pressure but the amplitude of transducer's output is proportional to the amplitude of pressure in the model. Also, the sphere that ultrasound reaches was widened and the amplitude of pressure became larger as the transducer size became larger. This results were similar to that obtained from the previous model consisting of fat-muscle-bone layered system, but we observed that the pressure of ultrasound is decreased due to the decrements of pressure by the absorption coefficient of skin and the interference that depends on the reflection of ultrasound caused by the difference of acoustic impedance of skin and fat. Finally, we can infer that the model proposed in this study is closer to the realistic model than the previous ones. It shows that the results obtained from this study can be useful in designing the ultrasound treatment instrument or in setting up the treatment plan.

• 한국생활과학회지
• /
• 제21권3호
• /
• pp.567-576
• /
• 2012

The purpose of this study was to analyze and determine the relationship between physiological responses including blood flow rate and garment pressure, and the feeling of restrictive tightness associated with the wearing skinny pants as a popular clothing style. Evaluation was based on material type, posture and activity type, and body part location. Five female college students took part in this research. Five kinds of experimental clothes with waist measurements of 66cm were chosen. An analysis of the selected skinny pants demonstrated the degree of the whole looseness was higher in this order: clothing type A>B>D>C, and E with E being knitted cloth. Garment pressure was the highest in the front knee portions and was lowest in the outside thigh region. Garment pressure was highest in this sequence : clothing type C>=D>A>=B>E. In terms of posture and activity types, garment pressure was the highest when research participants were crouching, and was the lowest when standing. The blood flow rate was highest in this order: clothing type E>D>B>A>C. Type C skinny pants impeded blood flow and demonstrated the tightest and most restrictive relationship. Blood flow rate varied depending on the type of movement and was highest in this order: getting up, rowing, kicking, jumping and O-shaped leg posture. The results of subjective pressure evaluation demonstrated that pressure was highest in this order: E>=C>B>A>D. These results suggests the need to improve on the patterns and the material design in the area of the front knees. The degree of the looseness when wearing skinny pants did not always correspond to garment pressure or subjective sensation.

• 한국생활과학회지
• /
• 제19권4호
• /
• pp.655-665
• /
• 2010

This study analyzed the effects of skinny jean on women's health by questionnaire survey and measuring the pressure experienced under the clothing and participants' subjective view of the pressure level. The average size women in their 20s' waists is 26 inches and so three pairs of jeans were prepared and worn by 4 female participants. A survey was conducted to investigate how often participants wear skinny jeans and whether they had had any feelings of discomfort as a result of this. Participants responded that they hadexperienced middle to high levels of discomfort due to the high pressure inside skinny jeans. For the maximum value of clothing pressures, jean f2 at the part of buttocks showed $48.7gf/cm^2$. The pressure inside the clothing was found to be highest around the buttocks followed by the knees and finally the belly. The mean values of 7 measuring parts are different according to the jean type; f3 $20.8gf/cm^2$ > f2 $16.4gf/cm^2$ > f1 $15.5gf/cm^2$, which is corresponding to the order of pressure sensation, but not corresponding to the order of ease amount of clothing pattern: f2 > f3 > f1. Mean pressure values were also measured according to the body posture: they were found to by highest when sitting on a chair (21.3gf/$cm^2$), second highest when sitting on the floor ($19.2gf/cm^2$) and lowest when standing ($15.0gf/cm^2$). This is not always same to the order of participants subjective perceptions of the pressure, which is, they estimated pressure to be highest when sitting on the floor followed by sitting on a chair and lowest in a standing position.

• Fibers and Polymers
• /
• 제6권4호
• /
• pp.322-331
• /
• 2005

Graduated compression stockings (GCS) have been widely used for the prophylaxis and treatment of venous diseases. Their gradient pressure function largely related to their fabric structure and material properties. By combing fabric physical testing and wear trials, this study investigated the GCSs fabric structure and material properties at different locations along the stocking hoses, and quantitatively analyzed the effects of fabrics on skin pressure longitudinal and transverse distributions. We concluded that, Structural characteristics and material properties of stocking fabrics were not uniform along the hoses, but a gradual variation from ankle to thigh regions, which significantly influenced the corresponding skin pressure gradient distributions; Tensile (WT, EM) and shearing properties (G) generated most significant differences among ankle, knee and thigh regions along the stocking hose, which significantly influenced the skin pressure lognitudinal gradient distribution. More material indices generating significant gradual changes occurred in the fabric wale direction along stocking hose, meaning that materials properties in wale direction would exert more important impact on the skin pressure gradient performances. And, the greater tensibility and smoother surface of fabric in wale direction would contribute to put stocking on and off, and facilitate wearers' leg extension-flexion movements. The indices of WT and EM of stocking fabrics in series A have strong linear correlations with skin pressure lognitudinal distribution, which largely related to their better performances in gradual changes of material properties. Skin pressure applied by fabric with same material properties produced pronounced differences among four different directions around certain cross-sections of human leg, especially at the ankle region; and, the skin pressure magnitudes at ankle region were more easily influenced by the materials properties, which were considered to be largely related to the anatomic structure of human leg.

• 한국패션뷰티학회지
• /
• 제2권1호
• /
• pp.5-13
• /
• 2004

This study was analyzed on relationship of blood vessel pressure massage and skin and management method on blood vessel pressure for skin care with Yin-yang 5 factors theory, Yin-yang 5 factors theory of blood vessel pressure massage with related Korean medicine is essential for descriptions of the physiology of human body and disease. Six elements(wind, heat, fire, dryness, wetness, and cold) and seven emotions(anger, happiness, thought, worry, sadness, surprise, and fear) effected on skin care and the five viscera and the six stomach. Blood vessel pressure massage related with skin consists of the five viscera and the six stomach and is improved blood circulation and is retarded aging of skin by controls of hormone and free nerve system. Blood vessel pressure massage for skin care improved in the intestine system and blood circulation and got healthy. The blood vessel pressure massage treatment of beauty art can aid the function of bio-rhythm of a human body and make our body health by healing the problems of the five viscera organs and the six stomach. It also help circulate of the blood flow and vigor. The study expects the related researches to improve the various treatments through this treatment. The researcher encountered many problems with the lack of concerned materials and former studies but expects this study to be a study to retard aging the skin and prevent the diseases through the study of the blood vessel pressure massage.

• 한국운동역학회지
• /
• 제22권3호
• /
• pp.261-268
• /
• 2012

The purpose of this study was to qualitatively analyze pressure intensity and the center of pressure(COP) trajectory according to shoe type. Subjects were ten first-year female university students. The EMED-AT 25/D(Novel, Germany) was used to measure pressure intensity and COP trajectory. The COP Excursion Index(CPEI) was used for within subject test design. Independent variables were bare feet and six types of shoes. Dependent variables were center of pressure trajectory and pressure intensity. Barefeet and five toed shoes had a similar pressure intensity and COP trajectory. COP trajectory for all other shoe types showed a medial wobble at the heel. Pressure intensity for all other shoe types was related to the structure of the shoes. In conclusion, different shoe types can not only affect gait, but they can also influence foot deformities, pain, and dysfunction.

• 대한의용생체공학회:의공학회지
• /
• 제29권4호
• /
• pp.323-328
• /
• 2008

A patient with respiratory disorders such as a sleep apnea is increasing as the obese patient increase on the modern society. Positive Airway Pressure (PAP) devices are used in curing patient with respiratory disorders and turn out to be efficacious for patients of 75%. However, these devices are required for evaluating their performance to improve their performance by the mechanical breathing simulator. Recently, the mechanical breathing simulator was studied by the real time feedback control. However, the mechanical breathing simulator by an open loop control was specially required in order to analyze the effect of flow rate and pressure after operating the breathing auxiliary devices. Therefore the aims of this study were to make the mechanical breathing simulator by a piston motion and a valve function from the characteristic test of valve and motor, and to duplicate the flow rate and pressure profiles of some breathing patterns: normal and three disorder patterns. The mechanical simulator is composed cylinder, valve, ball screw and the motor. Also, the characteristic test of the motor and the valve were accomplished in order to define the relationship between the characteristics of simulator and the breathing profiles. Then, the flow rate and pressure profile of human breathing patterns were duplicated by the control of motor and valve. The result showed that the simulator reasonably duplicated the characteristics of human patterns: normal, obstructive sleep apnea (OSA), mild hypopnea with snore and mouth expiration patterns. However, we need to improve this simulator in detail and to validate this method for other patterns.

• 대한가정학회지
• /
• 제36권6호
• /
• pp.85-94
• /
• 1998

In this study we tested the physiological influence on human-body according to clothing pressure with reduction rate and varied posture using three kinds of belt with different width. The width of belts were 2.5cm, 3.5cm and 4.5cm, and reduction rates of belts were 0%, 2.5% and 5% of the subject/s waist size respectively. the measured postures were standing state and sitting stste in the chair. The reasults are as follows; 1. Clothing pressure was high in the order of Side part>Front part>Back part and the rate fo change in the side part was highest, according to the reductio rate of belts. The more the width of belt was wide, the less the clothing pressure was small, and this kind of phenomenon could be explained by "The Principle of the power". 2. Both the rate of reduction of belt and the change of average skin temperature in accordance with the width of belt is small, however, the more the width of belts is wider and the reduction rate is bigger, the more the skin temperature at the waist part is increased. 3. The blood pressure and pulse was influenced when the width of belt was narrow and the reduction rate was high. 4. A sense restraining was much influenced by the width of belt, especially when the width of belts was wide, the significant difference was permitted.permitted.

• 한국생활과학회지
• /
• 제15권6호
• /
• pp.891-903
• /
• 2006

The purpose of this study was to identify relationships among peer pressure, parental supervision, alcohol expectancy and adolescent drinking behaviors between year 2001 and 2006. Three hundred high school students were given questionnaires each year on their drinking behavior. Findings of this study were; first, a adolescent drinking and the amount drinking has increased during the years. adolescent drinker ratio as adolescent drinkers were 91.3% in 2006 compared to 75.9% in 2001. The average drinking amounts were 40.82 units in 2006 and 24.9 units in 2001. Second, differences were found in adolescent drinking behaviors such as the amount of alcohol consumption, drinking frequency, & problem drinker ratio by gender, and grade. Male students over female students. Third, peer pressure, parental supervision, alcohol expectancy showed significant impacts on adolescent drinking behaviors through 2001 and 2006. Students who lack parental supervision with much higher drinking-related peer pressure along with a higher level of positive alcohol expectancy were observed to be heavy drinkers and problem drinkers. Especially, students who showed belief in alcohol's tension-relieving function and sociability function tended to over-drink, drink more frequently and as a result, experienced more drinking problems. Intervention strategies were discussed.