• Journal of the Korea Society of Computer and Information
• /
• v.27 no.6
• /
• pp.23-31
• /
• 2022

Due to the recent outbreak of COVID-19 and an aging population and an increase in single-person households, the amount of time that household members spend doing various activities at home has increased significantly. In this study, we propose an algorithm for detecting anomalies in members of single-person households, including the elderly, based on the results of human movement and fall detection using an image sensor algorithm through home CCTV, an activity sensor algorithm using an acceleration sensor built into a smartphone, and a 2D LiDAR sensor-based LiDAR sensor algorithm. However, each single sensor-based algorithm has a disadvantage in that it is difficult to detect anomalies in a specific situation due to the limitations of the sensor. Accordingly, rather than using only a single sensor-based algorithm, we developed a fusion method that combines each algorithm to detect anomalies in various situations. We evaluated the performance of algorithms through the data collected by each sensor, and show that even in situations where only one algorithm cannot be used to detect accurate anomaly event through certain scenarios we can complement each other to efficiently detect accurate anomaly event.

• PNF and Movement
• /
• v.20 no.2
• /
• pp.285-293
• /
• 2022

Purpose: The purpose of this study was to confirm that the activation of the contralateral muscles changes according to posture after applying the proprioceptive neuromuscular facilitation leg pattern. Methods: Ten healthy adults (four males and six females) with no history of current musculoskeletal/neurological injuries were recruited for this study. Abdominal muscle (transverse abdominis) and hip joint muscle (gluteus maximus and gluteus medius) activation was assessed using surface electromyography (Ultium EMG, Noraxon Inc., USA). We evaluated muscle activation during the application of the PNF leg pattern. The data were analyzed using the SPSS version 21.0 program. Results: The results were found to be statistically significantly different in the 90/90 supine posture and sitting posture for the gluteus maximus (p < 0.05). The results were found to be not statistically significantly different for the transverse abdominis according to posture (p > 0.05). The results were found to be not statistically significantly different for the gluteus medius according to posture (p > 0.05). Conclusion: Application of the PNF leg pattern resulted in a significant change in the muscle activation of the contralateral segment according to posture, and the 90/90 supine posture induced high muscle activation of the gluteus maximus. In addition, the activation of the transverse abdominis was high in all three postures.

• Fashion & Textile Research Journal
• /
• v.25 no.2
• /
• pp.221-229
• /
• 2023

This study aims to develop knee protectors that provide high safety and fitness, while incorporating a motion-adaptable 3D-printed pad. These protectors were evaluated by individuals who experience knee discomfort or pain. The results are as follows. First, the 3Dprinted pad design of a hexagonal mesh structure, which is modeled for excellent appearance and knee movement. Each unit of the mesh has a outer layer of 2mm thick, a spacer layer of 1 mm in diameter, and is connected by a 1.5 mm bridge. The bridge was extended up to 1.2 cm. Second, the knee brace was designed in three types - cylinder, strap, and combination by Universal design. Impact protection measurements of the three knee protectors demonstrated roughly 80% reduction in impact. Third, based on usability evaluation, cylinder type protectors have the highest ratings in most areas, primarily because of their ease of use. The strap type protector received positive reviews in terms of appearance and care, and the combination type provided stable knee protection. This study demonstrated the potential industrial application of 3D printing technology by designing and evaluating protective products for the human body. The results of this study are expected to aid knee protector manufacturers in developing practical products and promoting the development of protective equipment for other body parts or purposes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.4
• /
• pp.1216-1233
• /
• 2023

Conventional occupational therapy (OT) is conducted under the observation of an occupational therapist, and there are limitations in measuring and analyzing details such as degree of hand tremor and movement tendency, so this important information may be lost. It is therefore difficult to identify quantitative performance indicators, and the presence of observers during performance sometimes makes the subjects feel that they have to achieve good results. In this study, by using the Unity3D and artificial intelligence (AI) speaker, we propose a system that allows the subjects to steadily use it by themselves and helps the occupational therapist objectively evaluate through quantitative data. This system is based on the OT of the sensory integration approach. And the purpose of this system is to improve children's activities of daily living by providing various feedback to induce sensory integration, which allows them to develop the ability to effectively use their bodies. A dynamic OT cognitive assessment tool for children used in clinical practice was implemented in Unity3D to create an OT environment of virtual space. The Leap Motion Controller allows users to track and record hand motion data in real time. Occupational therapists can control the user's performance environment remotely by connecting Unity3D and AI speaker. The experiment with the conventional OT tool and the system we proposed was conducted. As a result, it was found that when the system was performed without an observer, users can perform spontaneously and several times feeling ease and active mind.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.2
• /
• pp.311-322
• /
• 2023

In this study, the properties of various material combinations were evaluated and an ideal material for fabricating protection pads for women's army combat uniforms was determined. Eight specimens were used for the evaluation: two types of materials, namely thermoplastic polyurethane for 3D printing, T and ethylene-vinyl acetate, E; two infill densities, namely 10%, 10 and 30%, 30; two types of pad designs, i.e., without holes, A and with holes, B; 2×2×2=8 and control E. The tensile strength, flexural strength, impact absorption, and weight of these specimens were evaluated. Results revealed that E was the most flexible material; however, its tensile strength and impact absorption were very low. Protection pads made from T (T-10A, T-10B, T-30A, and T-30B) had excellent tensile strength and impact absorption; however, they had low performance in ease of movement. Alternatively, protection pad with holes and an infill density of 30% produced using a combination of T and E had a high initial tensile modulus and exhibited excellent impact absorption. Moreover, it was flexible and light, which satisfies the standards and conditions required by protection pads. However, if T-E-10A and T-E-30B exhibited low impact absorption, as required, they can be regarded as appropriate materials for protection pads.

• The korean journal of orthodontics
• /
• v.53 no.2
• /
• pp.125-136
• /
• 2023

Before progress was recently made in the application of temporary anchorage devices (TADs) in bio-mechanical design, orthodontists were rarely able to intrude molars to reduce upper posterior dental height (UPDH). However, TADs are now widely used to intrude molars to flatten the occlusal plane or induce counterclockwise rotation of the mandible. Previous studies involving clinical or animal histological evaluation on changes in periodontal conditions after molar intrusion have been reported, however, studies involving human histology are scarce. This case was a Class I malocclusion with a high mandibular plane angle. Upper molar intrusion with TADs was performed to reduce UPDH, which led to counterclockwise rotation of the mandible. After 5 months of upper molar intrusion, shortened clinical crowns were noticed, which caused difficulties in oral hygiene and hindered orthodontic tooth movement. The mid-treatment cone-beam computed tomography revealed redundant bone physically interfering with buccal attachment and osseous resective surgeries were followed. During the surgeries, bilateral mini screws were removed and bulging alveolar bone and gingiva were harvested for biopsy. Histological examination revealed bacterial colonies at the bottom of the sulcus. Infiltration of chronic inflammatory cells underneath the non-keratinized sulcular epithelium was noted, with abundant capillaries being filled with red blood cells. Proximal alveolar bone facing the bottom of the gingival sulcus exhibited active bone remodeling and woven bone formation with plump osteocytes in the lacunae. On the other hand, buccal alveolar bone exhibited lamination, indicating slow bone turnover in the lateral region.

• The Journal of Korean Medicine
• /
• v.43 no.3
• /
• pp.36-48
• /
• 2022

Objectives: The aim of this study is to modernize Nutrient Qi(營氣) and Defense Qi(衛氣) from the point of view of Visceral Body and Somatic Body. Methods: Investigate the areas of body and function of Nutrient Qi(營氣) and Defense Qi(衛氣) recorded in the 『HuangdiNeijing(黃帝內經)』 and 『Dongeuibogam(東醫寶鑑)』. And investigate Visceral Body and Somatic Body that anatomical structure is divided according to function based on the book 『Life and Rhythm』. Results: Nutrient Qi(營氣) works to nourish the body such as viscera and bowels in the meridian. Defense Qi(衛氣) works to protect the body such as skin, limb joint, eye outside the meridian. The human body is divided into Visceral Body called a vegetable organ and Somatic Body called an animal organ. Visceral body is the organ that manages "nutrition-reproductive" and is divided into the intestine(腸管), blood vessels(血管), and the nephridium(腎管). Somatic Body is an organ that manages 'sensory-motion' and is divided into a three-layer structure: the outer layer covering the body surface, the nerve layer connecting the outer layer and the muscle layer, and the muscle layer controling contraction and movement. Conclusions: It is estimated that Nutrient Qi(營氣) is similar to Visceral Body, and Defense Qi(衛氣) is similar to Somatic Body.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.290-293
• /
• 2021

In this paper, we implement a learning efficiency verification system to inspire learning motivation and help improve concentration by detecting the situation of the user studying. To this aim, data on learning attitude and concentration are measured by extracting the movement of the user's face or body through a real-time camera. The Jetson board was used to implement the real-time embedded system, and a convolutional neural network (CNN) was implemented for image recognition. After detecting the feature part of the object using a CNN, motion detection is performed. The captured image is shown in a GUI written in PYQT5, and data is collected by sending push messages when each of the actions is obstructed. In addition, each function can be executed on the main screen made with the GUI, and functions such as a statistical graph that calculates the collected data, To do list, and white noise are performed. Through learning efficiency checking system, various functions including data collection and analysis of targets were provided to users.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.35-40
• /
• 2021

People counting data is crucial for most business owners, since they can derive meaningful information about customers movement within their businesses. For example, owners of the supermarkets can increase or decrease the number of checkouts counters depending on number of occupants. Also, it has many applications in smart buildings, too. Where it can be used as a smart controller to control heating and cooling systems depending on a number of occupants in each room. There are advanced technologies like camera-based people counting system, which can give more accurate counting result. But they are expensive, hard to deploy and privacy invasive. In this paper, we propose a method and a hardware sensor for counting people passing through a passage or an entrance using IR Infrared sensors. Proposed sensor operates at low voltage, so low power consumption ensure long duration on batteries. Moreover, we propose a new method that distinguishes human body and other objects. Proposed method is inexpensive, easy to install and most importantly, it is real-time. The evaluation of our proposed method showed that when counting people passing one by one without overlapping, recall was 96% and when people carrying handbag like objects, the precision was 88%. Our proposed method outperforms IR Infrared based people counting systems in term of counting accuracy.

• The Research Journal of the Costume Culture
• /
• v.31 no.1
• /
• pp.70-90
• /
• 2023

This study aims to use Art brut works-the artwork of the socially underprivileged and alienated-to influence social roles in fashion design, employing a formative expression method to promote social acceptance of diversity in the industry. The research method involved investigating Art brut's concept and evolution in domestic and foreign literature and previous studies. The formative characteristics of the movement were derived by analyzing the works of Art brut artist Johann Hauser. One hundred and twenty images of Johann's work were collected through online sources like the Gugging Museum's website, Christian Berst Gallery's website were developed as fashion design using the CLO 3D program. The formative characteristics of Johann's works appeared to be transparent overlapping, divisional decorativeness emphasized simplicity, and vibrant chromaticity. Based on this analysis, the results of the 3D digital fashion designs were as follows. First, the characteristics of the atypical objects and figures in Johann's works were applied to the design silhouette, revealing a uniquely beautiful form. Second, Johann used a method in which numerous line shapes overlap and fill the area. The point of connecting the work is expressed as a graphic pattern by decorating the lines of the hem and hem of the garment with piping or attaching overlapping straps on top of pants and dresses. Third, the combination of overlapping colors used in Johann's work is a color block design of fashion, which utilizes the formative fun.