• Proceedings of the ESK Conference
• /
• 1994.04a
• /
• pp.85-85
• /
• 1994

It is important to provide the opportunity and means to change body posture frequently during the work period. Maintaining a given posture, even if it appears comfortable in the beginning, becomes stressful as time goes on. In order to design most products some knowledge of the dimensions of the human body is required. Data concerning human body dimensions are referred to as anthropometric data. Anthropometric data are used to establish many product dimensions such as the heights of work surfaces, minimum size for access openings, spacing between controls, mounting angles for displays, distance between user and controls, and so forth. The usual procedure is to design to accommodate 90% of the population of anticipated product users. In sosme instances it is necessary to provide a method for adjusting because it allows users to alter the produst's dimensions to meet their individual needs. When the user makes the proper adjustments, the product will be easier to use (e.g., the seat and rearview mirror adjustment mechanisms on automobiles) or more comfortable (e.g., office chairs and stereo headphones).

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.227-236
• /
• 2015

This study analyzed the lower body type of 30's Korean men to develop a slim-fit pants pattern. As the analysis data, direct measurement data of anthropometric measured value in the 6th Size Korea(KATS, 2010) was used as basic data with 481 men in 30's as analysis objects. The result are as follows. First, the result of analyzing factors for the lower body type classification indicated five factors. Second, the result of executing group analysis (with the independent variable of 5 clusters extracted from the factor analysis)classified the following three types. Type 1(36.8%) displayed a medium height of lower body type, small waist and hip, slim and fit body type with a slim shape between the knee and ankle. The shape between the waist and hip had characteristics of a slight curve and short length. Type 2(35.6%) displayed lowest height of a lower body type that was large and thick between the waist and the hip. The drop value of the waist and the hip was small; therefore, the body type was flat with a minimal curve. The underpart type (below the knee) was the thickest and the length was short. Type 3(27.7%) displayed the highest lower body type, a medium level waist size, flat and narrow waist and belly. This body type had a curve with big drop value of the waist and the hip, lower part from the hip to the ankle (including the knee) and a thick calf with along leg.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.3
• /
• pp.454-463
• /
• 2022

This study aims to provide basic size data for the development of a hip dislocation prevention garment for cerebral palsy (CP) children and useful information for the design of garment products for CP children through identifying differences in body shape between CP and non-CP children and reviewing the tibial-stature prediction formulas of previous studies. Forty-seven Korean children with CP aged 2 to 14 years were measured for body size from October 2019 to August 2020. Body measurements of 18 sites, including greater trochanter length, which is an important site for a hip dislocation prevention garment, were collected and analyzed. Data of non-CP children were taken from same age of Size Korea and compared. Tibial-stature prediction formulas suggested in four previous studies were also reviewed. CP children had significantly lower stature as well as circumferential dimensions when compared to non-CP children. Greater trochanter length is difficult to predict through other body dimensions. Thus, direct measurement is required. Of the general key dimensions used in the clothing industry, only hip circumference could explain the body shape of CP children. Tibial-stature prediction formulas cannot always but tend to largely predict the actual stature of CP children.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.3
• /
• pp.113-122
• /
• 2019

In this study, I analyzed the measurement data of the early 20s male who are emphasizing the importance of good clothes in the fashion of body-contact clothes. Through this, I tried to provide basic data necessary for making clothing for early 20s male. Using data from Size Korea's 7th Human Body Survey, 588 people aged 20-25 years were analyzed and classified into four types. Type 1 have a thick and short body, narrow ankle and calf, thin legs. And the hip is not sagged, and height is a little short. So I named it 'short & thick body with bird legs'. Type 2 have a broad shoulder, slim and long body, and no sagging shoulders. So I named it 'slim inverted triangular figure'. Type 3 have a small height, thin and short body, and a thick ankle and calf. So I named it 'short & thin body with thick legs'. Type 4 have a tall height, narrow shoulder, and sagging hip and shoulders. So I named it 'Long triangle'. In order to improve fit of body-contact clothes reflecting the trend of men's wear in recent years, it is necessary to develop clothing prototypes by body type. 20s have the most ideal body shape after completion of growth, but differences in the length, thickness, and thickness of the trunk. This is reflected in the apparel pattern system, and it can be expected to increase consumers' satisfaction if they are used to make excellent ready-to-wear patterns.

• Journal of Fashion Business
• /
• v.20 no.2
• /
• pp.181-196
• /
• 2016

This study intended to suggest criteria for selection of subjects by lower body shape types necessary for evaluating slacks. For this, the characteristics were examined by lower body parts which would influence the fit of slacks on 3D human body shape data of the front and sides of the lower body for lower body shaping. The frequency of subjects by lower body shape types and the boundary points for discrimination of each type were suggested so that they could be available in selecting subjects. Using the data from Size Korea(2004), indirect measurement values measured on the front and sides of the lower body among 3D human body shape data of 175 subjects were analyzed. Their height, waist, and hip circumference fell under the range of standard deviation based on the mean of women aged 18~24 years, and then lower body shaping was conducted by combining the front and side shapes of the lower body. The front of the lower body was classified into four sections: average waist/average hip type(F1), average waist/narrow hip tyle(F2), narrow waist/narrow hip type(F3) and narrow waist/wide hip type(F4) and the sides of the lower body were divided into four sections: average abdomen/average hip type(S1), flat abdomen/average hip type(S2), average abdomen/protrude hip type(S3)and round abdomen/flat hip type(S4), and thus total 16 lower body types were created by cross analysis. Besides, discriminant analysis suggested the boundary points for each shape type of the front and sides of the lower body as a criterion for deciding lower body shape type of each subject

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.8
• /
• pp.860-874
• /
• 2012

This study provides size information on current imported medical compression stockings in Korea. A total 20 brands from 6 countries imported and sold in the Korean on-off line markets were selected for this study and the sizing system of medical compression stockings was researched. The results of this study were as follows: there were size differences among different USA brands according to product type or compression class of medical compression stockings. To establish the sizing system for medical stockings of the German brands, the basic body measurements standard was set as cA, cY, cB, cB, cC, cD, cE, cF, cG, cH, cT, lD, lG, and lT. Italian brands developed the sizing system for medical compression stockings by compression class. In the Swiss brands, size types were sub-divided as 'Normal', 'Plus', 'Short', and 'Long'. The sizing 1 were confined within very narrow limits. There were differences of the basic body measurements between Taiwan brands. The results of the comparison of the size range of the imported brands with Size Korea (KATS, 2010) by two-way size distribution shows that the sizing systems of the imported brands were unsuitable for Koreans. To enhance the suitability of the sizing system for medical compression stockings, a new sizing system for Korean adult males and females needs to be established.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.6
• /
• pp.1193-1203
• /
• 2023

This study aims to provide primary data regarding the thermal stress of disposable personal protective coveralls. Thermal stress and surface temperature measurements were taken among ten men wearing coveralls. The size of the ten men corresponds to a size eight in Size Korea. As a result of thermal stress, sensations of humidity and discomfort were higher when wearing Level C compared to Level D. Level D felt significant thermal stress in their upper body after exercise. However, they did not feel such stress in their lower body. Level C felt thermal stress in their upper and lower body after exercise. In addition, in Level C, the ratings of perceived exertion blood pressure and pulse rate after exercise were higher than those of Level D. Furthermore, the surface temperature of disposable personal protective coveralls among Level C was slightly higher than that of Level D.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.227-232
• /
• 2016

3D body scan data are used widely in various fields to make products and living spaces for superior human body fitness. Based on the 3D measurements of human bodies for teens in Size Korea 2013, this research provides a way of finding the representative body sizes and 3D body scan data. First, a multi-dimensional vector space consisting of many measurement items was projected onto a 2D vector space with circumference and length components via factor analysis. The representative body sizes and 3D scan data close to these values were obtained via the Mahalanobis distance in 2D space. Considering the adolescent growth pattern shown on this 2D space, males were divided into 4 age groups and females were divided into 3 age groups. Using the eigenbodies corresponding to the column vectors of the component score coefficient matrix, the representative body sizes of 13 measurement items (male) and 14 measurement items (female) for each age group were calculated. The representative body sizes and 3D scan data are very useful for modeling representative 3D human figures.

• The Research Journal of the Costume Culture
• /
• v.14 no.3 s.62
• /
• pp.381-386
• /
• 2006

This research is to find out what type of young women's body and how young women perceived their body. What's the most favorable style of young women and how the degree of body satisfaction affect to choose their dresses. This was find out how 123 young women with age 20 to 22, live in Seoul perceive their body and how their body perception or body satisfaction affect when they choose the clothing, and also what clothing style they prefer the most. And also how their body size was classified up to KS drop method. All respondents are classified into 3 groups of somatotypes. N. H and A types are. N. H somatotype are bigger than A somatotype. Their body perception was 3.65. They are satisfied feel comfort. They love very body conscious styles, tightly fitted style. Actually when they choose the right style, the somatotype was very important considerable variable. When the degree of body perception or body satisfaction is high, they are positive and easy to accept the current fashion.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.683-688
• /
• 2011

Objective: The aim of this study is to develop a distributed representative human model(DRHM) generation and analysis system. Background: DRHMs are used for a product with multiple-size categories such as clothing and shoes. It is not easy for a product designer to explore an optimal sizing system by applying various distributed methods because of their complexity and time demand. Method: Studies related to DRHM generation were reviewed and the RHM generation interfaces of three digital human model simulation systems(Jack$^{(R)}$, RAMSIS$^{(R)}$, and CATIA Human$^{(R)}$) were reviewed. Results: DRHM generation steps are implemented by providing sophisticated interfaces which offer various statistical techniques and visualization methods with ease. Conclusion: The DRHM system can analyze the multivariate accommodation percentage of a sizing system, provide body sizes of generated DRHMs, and visualize generated grids and DRHMs. Application: The DRHM generation and analysis system can be of great use to determine an optimal sizing system for a multiple-size product by comparing various sizing system candidates.