• Korean Journal of Remote Sensing
• /
• v.23 no.2
• /
• pp.145-152
• /
• 2007

The polarimetric backscattering coefficients of a wet-land rice field which is an experimental plot belong to National Institute of Agricultural Science and Technology in Suwon are measured using ground-based polarimetric scatterometers at 1.8 and 5.3 GHz throughout a growth year from transplanting period to harvest period (May to October in 2006). The polarimetric scatterometers consist of a vector network analyzer with time-gating function and polarimetric antenna set, and are well calibrated to get VV-, HV-, VH-, HH-polarized backscattering coefficients from the measurements, based on single target calibration technique using a trihedral corner reflector. The polarimetric backscattering coefficients are measured at $30^{\circ},\;40^{\circ},\;50^{\circ}\;and\;60^{\circ}$ with 30 independent samples for each incidence angle at each frequency. In the measurement periods the ground truth data including fresh and dry biomass, plant height, stem density, leaf area, specific leaf area, and moisture contents are also collected for each measurement. The temporal variations of the measured backscattering coefficients as well as the measured plant height, LAI (leaf area index) and biomass are analyzed. Then, the measured polarimetric backscattering coefficients are compared with the rice growth parameters. The measured plant height increases monotonically while the measured LAI increases only till the ripening period and decreases after the ripening period. The measured backscattering coefficientsare fitted with polynomial expressions as functions of growth age, plant LAI and plant height for each polarization, frequency, and incidence angle. As the incidence angle is bigger, correlations of L band signature to the rice growth was higher than that of C band signatures. It is found that the HH-polarized backscattering coefficients are more sensitive than the VV-polarized backscattering coefficients to growth age and other input parameters. It is necessary to divide the data according to the growth period which shows the qualitative changes of growth such as panicale initiation, flowering or heading to derive functions to estimate rice growth.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.16 no.1
• /
• pp.193-206
• /
• 2014

The objectives of the project are to increase farmers' income through GAP and to reduce the loss of agricultural produce, for which the Korean partner takes a role of transferring needed technologies to the project site. To accomplish the project plan, it is set to implement the project with six components: construction of buildings, installation of agricultural facilities, establishment of demonstration farms, dispatching experts, conducting training program in Korea and provision of equipments. The Project Management Committee and the Project Implementation Team are consisted of Korean experts and senior officials from Department of Agriculture, Myanmar that managed the project systematically to ensure the success of the project. The process of the project are; the ceremony of laying the foundation and commencing the construction of training center in April, 2012. The Ribbon Cutting Ceremony for the completion of GAP Training Center was successfully held under PMC (MOAI, GAPI/ARDC) arrangement in SAl, Naypyitaw on June 17, 2012. The Chairman of GAPI, Dr. Sang Mu Lee, Director General U Kyaw Win of DOA, officials and staff members from Korea and Myanmar, teachers and students from SAl attended the ceremony. The team carried out an inspection and fixing donors' plates on donated project machineries, agro-equipments, vehicles, computers and printer, furniture, tools and so forth. Demonstration farm for paddy rice, fruits and vegetables was laid out in April, 2012. Twenty nine Korean rice varieties and many Korean vegetable varieties were introduced into GAP Project farm to check the suitability of the varieties under Myanmar growing conditions. Paddy was cultivated three times in DAR and twice in SAl. In June 2012, vinyl houses were started to be constructed for raising seedlings and finished in December 2012. Fruit orchard for mango, longan and dragon fruit was established in June, 2012. Vegetables were grown until successful harvest and the harvested produce was used for panel testing and distribution in January 2013. Machineries for postharvest handling systems were imported in November 2012. Setting the washing line for vegetables were finished and the system as run for testing in June 2013. New water tanks, pine lines, pump house and electricity were set up in October 2013.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.319-327
• /
• 2023

To harvest marketable cucumbers, high quality seedlings must be used. Producing seedlings in the greenhouse during the low radiation period decreases marketability due to insufficient light for growth. Supplemental lighting with artificial light of different quality can be used to improve low light conditions and produce high quality seedlings. Therefore, this study was conducted to select the appropriate supplemental light sources on the growth and seedling quality of grafted cucumber seedlings during the low radiation period. Three cultivars of cucumber were used as scions for grafting; 'NakWonSeongcheongjang', 'Sinsedae', and 'Goodmorning baekdadagi'. Figleaf gourd (Cucurbita ficifolia) 'Heukjong' was used as the rootstock. The seeds were sown on January 26, 2023, and grafted on February 9, 2023. After graft-taking, cucumbers in plug trays were treated with RB light-emitting diodes (LED, red and blue LED, red:blue = 8:2), W LED (white LED, R:G:B = 5:3:2), and HPS (high-pressure sodium lamp), respectively. Non-treatment was used as the control. Supplemental lighting was applied 2 hours before sunrise and 2 hours after sunset for 19 days. The stem diameter and fresh and dry weights of roots did not differ significantly by supplemental light sources. The plant height and hypocotyl length were decreased in W LED. However, the leaf length, leaf width, leaf area, and fresh and dry weights of shoots were the highest in the RB LED. Seedling qualities such as crop growth rate, net assimilation rate, and compactness were also increased in RB LED and W LED. After transplanting, most of the growth was not significant, but early yield of cucumber was higher in LED than non-treatment. In conclusion, using RB LED, W LED for supplemental light source during low radiation period in grafted cucumber seedlings improved growth, seedling quality, and early yield of cucumber.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.4
• /
• pp.209-221
• /
• 2006

The purpose of this study is to analyze the effects of climate change on the nonpoint source pollution in a small watershed using a mid-range model. The study area is a basin in a rural area that covers 384 ha with a composition of 50% forest and 19% paddy. The hydrologic and water quality data were monitored from 1996 to 2004, and the feasibility of the GWLF (Generalized Watershed Loading function) model was examined in the agricultural small watershed using the data obtained from the study area. As one of the studies on climate change, KEI (Korea Environment Institute) has presented the monthly variation ratio of rainfall in Korea based on the climate change scenario for rainfall and temperature. These values and observed daily rainfall data of forty-one years from 1964 to 2004 in Suwon were used to generate daily weather data using the stochastic weather generator model (WGEN). Stream runoff was calibrated by the data of $1996{\sim}1999$ and was verified in $2002{\sim}2004$. The results were determination coeff, ($R^2$) of $0.70{\sim}0.91$ and root mean square error (RMSE) of $2.11{\sim}5.71$. Water quality simulation for SS, TN and TP showed $R^2$ values of 0.58, 0.47 and 0.62, respectively, The results for the impact of climate change on nonpoint source pollution show that if the factors of watershed are maintained as in the present circumstances, pollutant TN loads and TP would be expected to increase remarkably for the rainy season in the next fifty years.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.4
• /
• pp.3943-3955
• /
• 1975

The purposes of this study are to evaluate the utilization characteristics of electrical power consumption, to grasp the present trends in the use of electrical equipments, to estimate the demand factor and load factor being held, and to evaluate the efficiency of electical uses for the recently electrified farms cultivating paddy rice. For the purposes, 109 sample farms located in eleven villiages electrified in six different years from 1968 to 1973, were chosen at random and investigated on 35 items concerning to electrical uses and wiring systems. The survey was carried out in 1975, in the vinicity of Suweon city. The results are summarized as follows: i) The average annual power consumption on sample farms is considered to be low, being 242.9 Kwh. in 1974, and varied according to the different electrified year and size of cultivated land, respectively. It has significant positive correlation to the area of farm, too. ii) Between the number of year of electrical uses and the power consumption, there is very significant positive correlation, which could be expressed as Y=43.041+16.108 X, where X represents the number of years of electrical uses. The annual increment of power consumption is much greater at the beginning of the electrification than that at the later years, its average being approximately 20 percent. However, it is recommended that any estimation of long-term increments should be carefully investigated. iii) The monthly power consumption varies considerably throughout a year, in which the heaviest farm load occurs in November. Observing the seasonal variation of consumption, the winter-time is the heaviest season while the summer is the lowest. The result implies house lighting is chief contribution to the present electrical consumption on the farms. Comparing the variation of monthly consumption ratios between the sample farms and industries, the electrical uses on the farms are independant of the industrial uses, and further, the agricultural uses are of inverse pattern to the farms from the results that there is negative correlationship between them, iv) The number of electrical equipments used on the farms are occupied chiefly by lighting sources. Next to the lighting sources, household appliances of small quantity and some motors are used. The mean electrical quantity is about 1, 127.4 watt, which corresponds to about 37.6 per cent to the contracted quantity. The composition of quantity is chiefly occupied by the electrical motor of about 1.5 hp., single-phased. The number of the annual utilization hours of each equipment is tabulated in Table IV-5. In contradiction to the high utilization of lighting sources and small household appliances, the motor is poorly used for approximately 22 hours in a year. v) More than 55 per cent of farms want to purchase new electrical equipments such as small household appliances and electrical motors in their number. The impulse of purchasing such items is stimulated by the contacts to the mass media and their knowledge on such equipments. Consequently, the increase of electrical uses could be prompted by such trials as education and demonstration. vi) The demand and load factors on the farms vary considerably according to the greater variation of the power consumption, daily or monthly. The daily demand factor is 22.4 per cent and load factor 18.6 per cent, while the annual demand factor is 1.3 per cent and load factor 70 per cent approximately. Therefore, the low efficiency of construction cost requires re-evaluation of the present contracted quantity of 3 Kw. or increase of electrical uses. vii) The electrical energy on the farms devoted chiefly to lighten the farm residences does not contribute to the farm incomes. Consequently, the cost of electrical consumption presses considerably upon the farm economy. Therefore, there is great need to build up the electrical uses on the farms through the development of new works and techinques to utilize any electrical equipments on the production of farm products. Further more, such the development should be related to increase the actual income of the farm consumers.

• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.237-247
• /
• 1993

Activity ratio of two radioactive primary fission products which had sufficiently different half-lives was expressed as functions of cooling time and irradiation histories in which average burnup, irradiation time, cycle interval time and the dominant fissile material of the spent fuel were included. The gamma-ray spectra of 36 samples from 6 spent PWR fuel assemblies irradiated in Kori unit-1 reactor were obtained by a spectrometric system equipped with a high purity germanium gamma-ray detector. Activity ratio $^{l44}$Ce $^{l37}$Cs, analyzed from each spectrum, was used for the calculation of cooling time. The results show that the radioactive fission products $^{l44}$Ce and $^{l37}$Cs are considered as useful monitors for cooling time determination because the estimated cooling time by detection of activity ratio $^{l44}$Ce $^{l37}$Cs agreed well with the operator declared cooling time within relative difference of $\pm$5 % despite the low counting rate of the gamma-ray of $^{l44}$Ce (about 10$^{-3}$ count per second). For the samples with several different irradiation histories, the determined cooling time by modeled irradiation history showed good agreement with that by known irradiation history within time difference of $\pm$0.5 year. From this result, it would be expected to be possible to estimate reliably the cooling time of spent nuclear fuel without the exact information about irradiation history. The feasibility study on identification of and/or sorting out spent nuclear fuel by applying the technique for cooling time determination was also performed and the result shows that the detection of activity ratio $^{l44}$Ce $^{l37}$Cs by gamma-ray spectrometry would be usefully applicable to certify spent nuclear fuel for the purpose of safeguards and management in a facility in which the samples dismantled or cut from spent fuel assemblies are treated, such as the post irradiation examination facility.mination facility.

• Korean Journal of Agricultural Science
• /
• v.8 no.1
• /
• pp.90-96
• /
• 1981

To design more efficient agricultural machinery, the accurately measuring system among many other factors is essential. A light-beam oscillographic recorder is generally used in measuring dynamic strain but it is not compatible with the extremely high speed measuring system such as 1,000 m/s, also is susceptable to damage due to vibration while using the system in field. The recorder used light sensitive paper for strip chart recording. The reading and analysis of data from the strip charts is very cumbersome, errorneous and time consuming. A microcomputer was interfaced with A/D converter, microcomputer program was developed for measuring, system calibration was done and the strain generated from a cantilever beam vibrator was measured. The results are summarized as follows. 1. Microcomputer program was developed to perform strain measuring of agricultural machine elements and could be controled freely the measuring intervals, no. of channels and no. of data. The maximum measuring speed was $62{\mu}s$. 2. Calibration the system was performed with triangle wave generated from a function generator and checked by an oscilloscope. The sampled data were processed using HP 3000 minicomputer of Chungnam National University computer center the graphical results were triangle same as input wave and so the system have been out of phase distorsion and amplitude distorsion. 3. The strain generated from a cantilever beam vibrator which has free vibration period of 0.019 second were measured by the system controlled to have l.0 ms of time interval and its computer output showing vibration curve which is well filted to theoretical value. 4. Using microcomputer on measuring the strain of agricultural machine elements could not only save analyzing time and recording papers but also get excellent adaptation to field experiment, especially in measurement requiring high speed and good precision.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.27-35
• /
• 2014

The headspace solid-phase microextraction (HS-SPME) followed by gas chromatography/mass spectrometry procedure has been developed for the simultaneous determination of petroleum aromatic hydrocarbons such as benzene, toluene, ethylbenzene and xylene isomers (BTEX) and polycyclic aromatic hydrocarbons (PAHs) in seawater. The advantages of SPME compared to traditional methods of sample preparation are ease of operation, reuse of fiber, portable system, minimal contamination and loss of the sample during transport and storage. SPME fiber, extraction time, temperature, stirring speed, and GC desorption time were key extraction parameters considered in this study. Among three kinds of SPME fibers, i.e., PDMS ($100{\mu}m$), CAR/PDMS ($75{\mu}m$), and PDMS/DVB ($65{\mu}m$), a $65{\mu}m$ PDMS/DVB fiber showed the most optimal extraction efficiencies covering molecular weight ranging from 78 to 202. Other extraction parameters were set up using $65{\mu}m$ PDMS/DVB. The final optimized extraction conditions were extraction time (60 min), extraction temperature (50), stirring speed (750 rpm) and GC desorption time (3 min). When applied to artificially contaminated seawater like water accommodated fraction, our optimized HS-SPME-GC/MS showed comparable performances with other conventional method. The proposed protocol can be an attractive alternative to analysis of BTEX and PAHs in seawater.

• Journal of Haehwa Medicine
• /
• v.9 no.1
• /
• pp.513-545
• /
• 2000

I. Introduction Bi(痺) means blocking. It can reach at the joints or muscles or whole body and make pains. Numbness and movement disorders. BiJeung can be devided into SilBi and HeoBi. In SilBi there are PungHanSeupBi, YeolBi and WanBi. In HeoBi, there are GiHyeolHeoBi, EumHeoBi and YangHeoBi. The common principle for the treatment of BiJeung is devision of the chronic stage and the acute stage. In the acute stage, BiJeung is usually cured easily but in the chronic stage, it is difficult. In the terminal stage, BiJeung can reach at the internal organs. BiJeung is one kind of symptoms making muscles, bones and jonts feel pain, numbness or edema. For example it can be gout or SLE etc. Many famous doctors studied medical science by their fathers or teachers. So the history of medical science is long. So I studied ${\ll}Bijeungjujip{\gg}$. II. Final Decision 1. BanSuMun(斑秀文) thought that BiJeung can be cured by blocking of blood stream. So he insisted that the important thing to cure BiJeung is to improve the blood stream. He usually used DangGuiSaYeokTang(當歸四逆湯), DangGuiJakYakSanHapORyeongSan, DoHong-SaMulTang(桃紅四物湯), SaMyoSanHapHeuiDongTang and HwangGiGyeJiOMulTang. 2. JangGeonBu(張健夫) focused on soothing muscles and improving blood seam. So he used many herbs like WiRyeongSeon(威靈仙), GangHwal(羌活), DokHwal(獨活), WooSeul(牛膝), etc. Especially he pasted wastes of the boiled herbs. 3. OSeongNong(吳聖農) introduced four rules to treat arthritis. So he usually used SeoGak-SanGaGam(犀角散加減), BoYanHwanOTang(補陽還五湯), ODuTang(烏頭湯), HwangGiGyeJiOMulTang. 4. GongJiSin thought disk hernia as one kind of BiJeung. And he said that Pung can hurt upper limbs and Seup can hurt lower limbs. He used to use GyeJiJakYakJiMoTang(桂枝芍藥知母湯). 5. LoJiJeong(路志正) introduced four principles to treat BiJeung. He used BangPungTang(防風湯), DaeJinGuTang) for PungBi(風痺), OPaeTang(烏貝湯) for HanBi(寒痺), YukGunJaTang(六君子湯) for SeupBi(濕痺) and SaMyoTang(四妙湯), SeonBiTang(宣痺湯), BaekHoGaGyeTang(白虎加桂湯) for YeolBi(熱痺). 6. GangChunHwa(姜春華) discussed herbs. He said SaengJiHwang(生地黃) is effective for PungSeupBi and WiRyungSun(威靈仙) is effective for the joints pain. He usually used SipJeonDaeBoTang(十全大補湯), DangGuiDaeBoTang(當歸大補湯), YoukGunJaTang(六君子湯) and YukMiJiHwanTang(六味地黃湯). 7. DongGeonHwa(董建華) said that the most important thing to treat BiJeung is how to use herbs. He usually used CheonO(川烏), MaHwang(麻黃) for HanBi, SeoGak(犀角) for YeolBi, BiHae) or JamSa(蠶沙) for SeupBi, SukJiHwang(熟地黃) or Vertebrae of Pigs for improving the function of kidney and liver, deer horn or DuChung(杜沖) for improving strength of body and HwangGi(黃?) or OGaPi(五加皮) for improving the function of heart. 8. YiSuSan(李壽山) devided BiJeung into two types(PungHanSeupBi, PungYeolSeupBi). And he used GyeJiJakYakJiMoTang(桂枝芍藥知母湯) for the treatment of gout. And he liked to use HwanGiGyeJiOMulTangHapSinGiHwan 枝五物湯合腎氣丸) for the treat ment of WanBi(頑痺). 9. AnDukHyeong(顔德馨) made YongMaJeongTongDan(龍馬定痛丹)-(MaJeonJa(馬錢子) 30g, JiJaChung 3g, JiRyong(地龍) 3g, JeonGal(全蝎) 3g, JuSa(朱砂) 0.3g) 10. JangBaekYou(張伯臾) devided BiJeung into YeolBi and HanBi. And he focused on improving blood stream. 11. JinMuO(陳茂梧) introduced anti-wind and dampness prescription(HoJangGeun(虎杖根) 15g, CheonChoGeun 15g, SangGiSaeng(桑寄生) 15g, JamSa(蠶絲) 15g, JeMaJeonJa(制馬錢子) 3g). 12. YiChongBo(李總甫) explained basic prescriptions to treat BiJeung. He used SinJeongChuBiEum(新定推痺陰) for HaengBi(行痺), SinJeongHwaBiSan(新定化痺散) for TongBi(痛痺), SinJeongGaeBiTang(新定開痺湯) for ChakBi(着痺), SinJeongCheongBiEum(新定淸痺飮) for SeupYeolBi(濕熱痺), SinRyeokTang(腎瀝湯) for PoBi(胞痺), ORyeongSan for BuBi(腑痺), OBiTang(五痺湯) for JangBi(臟痺), SinChakTang(腎着湯) for SingChakByeong(腎着病). 13. HwangJeonGeuk(黃傳克) used SaMu1SaDeungHapJe(四物四藤合制) for the treatment of a acute arthritis, PalJinHpPalDeungTang(八珍合八藤湯) or BuGyeJiHwangTangHapTaDeungTang(附桂地黃湯合四藤湯) for the chronic stage and ByeolGapJeungAekTongRakEum(鱉甲增液通絡飮) for EumHeo(陰虛) 14. GaYeo(柯與參) used HwalRakJiTongTang(活絡止痛湯) for shoulder ache, SoJongJinTongHwalRakTank(消腫鎭痛活絡湯) for YeolBi(熱痺), LiGwanJeolTang(利關節湯) for ChakBi(着痺), SinBiTang(腎痺湯) for SinBi(腎痺) and SamGyoBoSinHwan(三膠補腎丸) for back ache. 15. JangGilJin(蔣길塵) liked to use hot-character herbs and insects. And he used SeoGeunLipAnTang(舒筋立安湯) as basic prescription. 16. RyuJangGeol(留章杰) used GuMiGangHwalTang(九味羌活湯) and BangPungTang(防風湯) at the acute stage, ODuTang(烏頭湯) or GyeJiJakYakJiMoTang(桂枝芍藥知母湯) for HanBi of internal organs, YangHwaHaeEungTang(陽和解凝湯) for HanBi, DokHwalGiSaengTang(獨活寄生湯), EuiYiInTang(薏苡仁湯) for SeupBi, YukGunJaTang(六君子湯) for GiHeoBi(氣虛痺) and SeongYouTang(聖兪湯) for HyeolHeoBi(血虛痺). 17. YangYuHak(楊有鶴) liked to use SoGyeongHwalHyelTang(疏經活血湯) and he would rather use DoIn(桃仁), HongHwa(紅花), DangGui(當歸), CheonGung(川芎) than insects. 18. SaHongDo(史鴻濤) made RyuPungSeupTang(類風濕湯)-((HwangGi 200g, JinGu 20g, BangGi(防己) 15g, HongHwa(紅花) 15g, DoIn(桃仁) 15g, CheongPungDeung(靑風藤) 20g, JiRyong(地龍) 15g, GyeJi(桂枝) 15g, WoSeul(牛膝) 15g, CheonSanGap(穿山甲) 15g, BaekJi(白芷) 15g, BaekSeonPi(白鮮皮) 15g, GamCho(甘草) 15g).

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.3
• /
• pp.374-383
• /
• 2010

Microwave radar can penetrate cloud cover regardless of weather conditions and can be used day and night. Especially a ground-based polarimetric scatterometer has advantages of monitoring crop conditions continuously with full polarization and different frequencies. Kim et al. (2009) have measured backscattering coefficients of paddy rice using L-, C-, X-band scatterometer system with full polarization and various angles during the rice growth period and have revealed the necessity of near-continuous automatic measurement to eliminate the difficulties, inaccuracy and sparseness of data acquisitions arising from manual operation of the system. In this study, we constructed an X-band automatic scatterometer system, analyzed scattering characteristics of paddy rice from X-band scatterometer data and estimated rice growth parameter using backscattering coefficients in X-band. The system was installed inside a shelter in an experimental paddy field at the National Academy of Agricultural Science (NAAS) before rice transplanting. The scatterometer system consists of X-band antennas, HP8720D vector network analyzer, RF cables and personal computer that controls frequency, polarization and data storage. This system using automatically measures fully-polarimetric backscattering coefficients of rice crop every 10 minutes. The backscattering coefficients were calculated from the measured data at a fixed incidence angle of $45^{\circ}$ and with full polarization (HH, VV, HV, VH) by applying the radar equation and compared with rice growth data such as plant height, stem number, fresh dry weight and Leaf Area Index (LAI) that were collected at the same time of each rice growth parameter. We examined the temporal behaviour of the backscattering coefficients of the rice crop at X-band during rice growth period. The HH-, VV-polarization backscattering coefficients steadily increased toward panicle initiation stage, thereafter decreased and again increased in early-September. We analyzed the relationships between backscattering coefficients in X-band and plant parameters and predicted the rice growth parameters using backscattering coefficients. It was confirmed that X-band is sensitive to grain maturity at near harvesting season.