• KIEAE Journal
• /
• v.5 no.3
• /
• pp.41-48
• /
• 2005

Before occupation of an apartment housing, the builders are required to inform the test result of IAQ to the public. However, there is no simplified method to predict IAQ before measurement of pollutant concentration. In this study, a simplified way of predicting IAQ based on the distribution of indoor pollutant concentration is proposed. 7 different cases of air change rate have been simulated through CFD analysis to get the distribution ratio of each pollutant material and then simplified functions were used with CRIAQ1 values derived from CFD simulation to evaluate by comparing the influence of each material in the indoor pollutant concentration. Again, a lot of efforts which can improve the indoor air quality have been performed. Materials used in indoor space are labeled with their pollutant emission level. Installation of ventilation system in residential buildings will be regulated by a building codes sooner or later. But it is important to understand the fact that layout of walls, location or size of openings will influence the indoor air flow and pollutant concentration. And location of emitting material influences to indoor air pollutants distribution. But until now there is few recognition and consideration of these factors. Therefore, in this paper the effects of these factors is proved and some kind of guideline is made for designers after a comparison of typical apartment floor plan and a new type plan with their average pollutant concentration and its distribution of each room. CFD(Computational Fluid Dynamics) program was used to show the indoor air flow and pollutant concentration distribution. For this purpose, a typical $100m^2$ apartment floor plan was chosen as a case study model and several alternatives were reviewed to improve the IAQ performance. The simulation took place in the condition of natural ventilation through windows.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.3
• /
• pp.91-101
• /
• 2012

The purposes of this study were to identify the living environment in rural fishing area and to suggest checking methods for implementation performance. Rural service standard is the key factor of rural development in Korea. In 2012. The first Implementations of performance was announced. The results were presented to the unit by the City and the County. Because of Fishing villages exists as a unit by the haengjeongri. It is difficult to know the status of the fishing villages by the Rural service standard. In order to look for the actual conditions in rural fishing village it was investigated in the 100 Eochongye. The data used in the analysis is 577 questionnaires. Analysis showed that rural fishing areas were superior to general state of rural in the 8 items of rural service standard. Especially housing, transportation and health care sector in rural fishing area wes better than general state of rural. But Public safety and order is relatively poor. This is because Fishing village contains islands. Presenting to improve rural service standard based on the results of research. The items of rural service standard should be measured the actual residents' accessibility than opportunity of the public service, and after setting the rural service standard clearly related to the quality of life of residents in each sector. Accessibility aspects of the customer for the public services should be considered. Checking the performance for the unit by the City and the County should be replaced as a living zone in order to consider the facilities using nearby.

• The Journal of the Korea Contents Association
• /
• v.17 no.5
• /
• pp.388-409
• /
• 2017

This study was to explore experiences of Female Ex-offender's re-entry process to socialization. For this, 9 female ex-offenders who receive housing support by the Korea Rehabilitation Agency were interviewed and the Strauss and Corbin's ground theory is used to approach to the data. In open coding, 88 concepts, 33 subcategories, and 15categories emerged from the data. In axial coding, central phenomenon were 'indulge in self pity', 'being isolated female ex-offender'. Intervention condition was 'human cooperation system'. Strategies were 'increase the receptiveness', 'establish the foundation'. Consequences were 'finding the stability in the life', 'changing the life direction'. In selective coding, main theme was 'overcome social stigma through changing life-direction and acclimate to society', and four phases were derived from the data. Based upon this results outcome, need of female ex-offender in the process of social transition and their experience were discussed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.3
• /
• pp.75-82
• /
• 2010

The static strengths of the existing RC beams were experimentally investigated in this paper to understand the strength characteristics of existing structural members and to get appropriate data in strengthening RC members in the remodelling construction. Ten RC beams were prepared by cutting and extracting directly from the demolition site of apartment housings and tested in order to evaluate the flexural and shear strengths of existing RC beams by their geometric condition. From the test results, it was found that most of the specimens had a sufficient structural capacity except for some special case, for example, specimens with severe cracks or concrete losses caused by improper casting. Therefore, the severely deteriorated members originated from bad concrete casting or careless construction process should be repaired and strengthened in remodelling construction.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.33 no.12
• /
• pp.53-63
• /
• 2017

The purpose of this study is to present an integrated analysis for energy use and its patterns as vertical locations of the dwelling units in apartment buildings which are located in an urban area and constructed by a renowned contractor. In order to enhance the effectiveness of the method, the original data of electricity, water, and gas bills which directly reflect the energy use are sorted and analyzed into several groups as vertical locations in each building. And also, by use of comparing and contrasting the data on a monthly and yearly basis, the accuracy of analyses for seasonal energy use and its patterns is strengthened. Comparative analyses used in this study describe the results that vertical locations of dwelling units do not have much influence on electricity and water usage, but are closely related with gas usage for a heating season. According to the analysis of gas usage, the units on the ground and right above pilotis need enhancement in the insulations for heating to mitigate energy loss. Also, the analysis for the middle floor units in each group describe the fact that the gas usage of the units on the ground is consumes 1.5 times greater than that of the typical floors. Therefore, enhanced insulation strategies need to be considered against the adverse condition that the heat loss increases as the wall facing the outside air increases or as the wind velocity increases through the pilotis.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.4
• /
• pp.195-201
• /
• 2020

This study studied scoliosis, one of the most common modern diseases caused by lifestyle patterns of office workers sitting in front of computers all day and modern people who use smart phones frequently. Scoliosis is a typical complication that takes more than 80% of the nation's total population at least once. X-ray are used to test for these complications. X-ray, a non-destructive testing method that allows scoliosis to be easily performed and filmed in various areas such as the chest, abdomen and bone without contrast agents or other instruments. We uses NI DAQ to miniaturize digital X-ray imaging devices and image intensifier in self-shielding housing with Vision Assistant for drawing lines to the top and the bottom of the spine to acquire angles, i.e. curvature in real-time. In this way, the research was conducted to see scoliosis patients and their condition easily and to help rapid treatment for solving the problem of posture correction in modern people.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.6
• /
• pp.1-14
• /
• 2020

Under the 「National Land Planning and Utilization Act」, Development Restriction Zones(DRZ) is one of the designated use district where the Minister of Land, Infrastructure and Transport deems it necessary to control urban development in order to prevent urban sprawl and conurbation and ensure a healthy living environment for citizens by conserving the natural environment surrounding metropolitan cities. DRZ was first designated around the Seoul Metropolitan city in 1971, and had been expanded to the 14 metropolitan areas across the country since 1977. The designated areas were accounted for about 5.4% of the total national land and its importance was demonstrated by contributing to control urban sprawl, curbing real estate speculation, and providing green space to citizens. However, DRZ has been repeatedly relaxed its regulations and allowed development under government. As a result, much of the green areas was damaged and several cities were merged and extended(conurbation). In particular, deregulation implemented for the purpose of securing land as part of national projects and local outstanding business(i.g. constructions of national rental housing, industrial complex, and international stadium) have caused continuous environmental damage around the metropolitan cities. In addition, the habitat fragmentation is in serious situation. Thus, the systematic plans for managing DRZ are necessary, since it is concerned that urban environment become deteriorate in the mid- to long-term. This study aims to continuously protect the urban environment from lifting DRZ. Therefore, firstly, we examined the environmental status through analyzing DRZ Management Plan which shall be drawn up by the Special Metropolitan City Mayor, the Metropolitan City Mayor or the Mayer/Do governor having jurisdiction, every five years to collectively manage DRZ. Secondly, we investigated the actual condition in DRZ based on the case study of Management Plan in Metropolitan areas(i.e. Seoul Metropolis, Gyeonggi-do, and Incheon Metropolis). Finally, we suggested the seven feasible improved political plan for managing DRZ.

• Korean Journal of Veterinary Service
• /
• v.44 no.4
• /
• pp.175-183
• /
• 2021

This study investigated the status and analyzed of stray dogs, stray cats admitted to the Jeju Animal Shelter during the year of 2015 to 2019, and the infection rates of specific diseases for abandoned dogs. In addition, in 2017 to 2019, the collected intake and outcome data were reviewed to analyze shelter capacity in terms of housing capacity (monthly daily average intake, required holding capacity, and adoption-driven capacity), staff capacity (staff hours required for daily care). Out of 24,557 dogs admitted to the shelter, owners of 1,808 dogs (7.4%) visited the shelter and found their lost dogs, while 3,612 dogs (14.7%) were adopted to new families. However, the number of puppies that were euthanized was the highest at 12,266 (49.9%), and 6,876 (28%) died either death from disease or natural causes because they were detained in shelters. The monthly daily average (MDA), which is one of the indicators for efficient population management of Jeju Animal Shelter, was found to be 17.4 for abandoned dogs and 1.7 for abandoned cats. Seasonal variations were observed for MDA, RHC, MDA adoptions, ADC, and RSDC, indicating that various strategies are needed for shelter management. This study was performed to analyze and interpret meaningful statistics for improving the efficiency of animal shelters in Jeju. However, inconsistent collection of animal statistics limited data compilation. Creation of a basic animal statistics matrix with reference to well-designed matrices from recognized professional animal shelters is essential.

• Steel and Composite Structures
• /
• v.46 no.4
• /
• pp.497-512
• /
• 2023

Using light weight concrete as infill material in conventional cold-formed steel (CFS) shear wall systems can considerably increase their load bearing capacity, ductility, integrity and fire resistance. The compressive strength of the filler concrete is a key factor affecting the structural behaviour of the composite wall systems, and therefore, achieving maximum compressive strength in lightweight concrete while maintaining its lightweight properties is of significant importance. In this study a new type of optimum polystyrene lightweight concrete (OPLC) with high compressive strength is developed for infill material in composite CFS shear wall systems. To study the seismic behaviour of the OPLC-filled CFS shear wall systems, two full scale wall specimens are tested under cyclic loading condition. The effects of OPLC on load-bearing capacity, failure mode, ductility, energy dissipation capacity, and stiffness degradation of the walls are investigated. It is shown that the use of OPLC as infill in CFS shear walls can considerably improve their seismic performance by: (i) preventing the premature buckling of the stud members, and (ii) changing the dominant failure mode from brittle to ductile thanks to the bond-slip behaviour between OPLC and CFS studs. It is also shown that the design equations proposed by EC8 and ACI 318-14 standards overestimate the shear force capacity of OPLC-filled CFS shear wall systems by up to 80%. This shows it is necessary to propose methods with higher efficiency to predict the capacity of these systems for practical applications.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.3
• /
• pp.589-596
• /
• 2018

Transportation or structure has the important role at clothing, food, and housing at modern society. If even the small crack happens and propagates at transportation or structure, the parts are fractured and they can cause a disaster. CT specimen was used in order to investigate the damage trend due to the crack propagation at this study to prevent this situation. As the material of CT specimen, the unidirectional carbon fiber reinforced plastic of the composite material in the limelight nowadays. The laminate angle designated in order of [60/-60/60/-60] was applied to the specimen model with the unidirectional fiber. As the analysis condition, the forced displacement was applied to the hole of upper part after fixing the hole of lower part. At the result of this study, the equivalent stress and shear stress was shown to be higher in order of the structural steel, copper, titanium and aluminum. This study result is thought to be utilized usefully at verifying the damage of CT specimen made of inhomogeneous material.