• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.218-223
• /
• 2007

The dissipation of high-power ultrasonic energy at the faces of the defect causes an increase in temperature. It is resulted from localized selective heating in the vicinity of cracks because of the friction effect. In this paper the measurement of size and direction of crack using UET(Ultrasound Excitation Thermography) is described. The ultrasonic pulse energy is injected into the sample in one side. The hot spot, which is a small area around the crack tip and heated up highly, is observed. The hot spot, which is estimated as the starting point of the crack, is seen in the nearest position from the ultrasonic excitation point. Another ultrasonic pulse energy is injected into the sample in the opposite side. The hot spot, the ending point of the crack, is seen in the closest distance from the injection point also. From the calculation of the coordinates of both the first hot spot and the second hot spot observed, the size and slope of the crack is estimated. In the experiment of STS fatigue crack specimen(thickness 14mm), the size and the direction of the crack was measured.

• 방송공학회논문지
• /
• 제15권6호
• /
• pp.845-852
• /
• 2010

클라이언트로부터의 요구메시지의 통계를 바탕으로 하여 방송 서버는 데이터 아이템에 대하여 최적의 컷오프 포인트를 이용하여 핫 아이템과 콜드 아이템으로 나눈다. 핫 아이템은 주기적으로 방송되는데 이 때, 방송 주기는 아이템들의 인기도, 즉 요구확률에 따라 정해진다. 핫 아이템이 방송되지 않은 빈 슬롯에는 적절한 콜드 아이템을 골라 방송하게 되는데, 이 때 대기시간과 대기 중인 요구 메시지의 수 등을 고려하여 콜드 아이템을 정한다. 최적의 컷오프 포인트를 해석적으로 구하기 위하여 평균 응답시간을 컷오프 포인트의 함수로 나타나도록 계산하였다. 요청 도착율과 아이템의 인기도를 변화하면서 수행한 시뮬레이션을 통하여 본 논문에서 제안한 방법이 기존의 방법들보다 더욱 우수한 성능을 나타냄을 보였다.

• 에너지공학
• /
• 제4권2호
• /
• pp.297-302
• /
• 1995

Ignition of a reactive solid in a shape of square corner by a hot surface is studied theoretically. Ignition time and the location of ignition point are determined as a function of dimensionless parameters, with the use of the homogeneous model of ignition. The effect of geometry on the ignition of solid fuel results in the local characteristics: the reaction is initiated in a hot point in depth of the substance. It is shown that ignition time is proportional to the dimensionless initial temperature, whereas for the ignition of the semiinfinite body this dependence was quadratic.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.175-180
• /
• 2001

In this study, the minimum heat flux conditions are experimentally investigated for the spray cooling of hot plate. The hot plates are cooled down from the initial temperature of about $900^{\circ}C$, and the local heat flux and surface temperatures are calculated from the measured temperature-time history. The results show that the minimum heat flux point temperatures increase linearly resulting from the propagation of wetting front with the increase of the distance from the stagnation point of spray flow. However, in the wall region, the minimum heat flux point temperature becomes independent of the distance. Also, the experimental results show that the velocity of wetting front increases with the increase of the droplet flow rate.

• 설비공학논문집
• /
• 제13권10호
• /
• pp.974-981
• /
• 2001

In this study, the minimum heat flux conditions are experimentally investigated for the spray cooling of hot plate. The hot plates are cooled down from the initial temperature of about$ 900^{\circ}C$, and the local heat flux and surface temperatures are calculated from the measured temperature-time history. The results show that the minimum heat flux point temperatures increase linearly resulting from the propagation of wetting front with the increase of the distance from the stagnation point of spray flow. However, in the wall region, the minimum heat flux point temperature becomes independent of the distance. Also, the velocity of wetting front increases with the increase of the droplet flow rate.

• 성인간호학회지
• /
• 제26권2호
• /
• pp.159-170
• /
• 2014

Purpose: This research investigated the degree and predictors of hot flashes and hypogonadism symptoms in patients with prostate cancer receiving hormone replacement therapy. Methods: The subjects were 111 patients with prostate cancer receiving hormone replacement therapy in two university hospitals located in D city. The measurement tools included Hot Flash Diary and AMS (Aging Male's Symptoms rating scales). The data were analyzed using t-test, ANOVA, and binary logistic regression analysis. Results: The percentage of patients who experienced hot flashes among the participants was 14.4%. The predictors for hot flashes were eating irregularly, having coffee frequently and the types of hormone. The average score of hypogonadism symptom was 2.16 out of five-point scale and the highest score of hypogonadism symptom was the sexual symptoms (2.77 out of five-point scale). The predictors for hypogonadism symptom were eating habits and years of having the illness. Conclusion: These findings provide the information that irregularly eating habit was an important factor in hot flashes and hypogonadism symptoms of the participants. Therefore the development of a nutritional education encouraging regular meals is necessary for the given population.

• 접착 및 계면
• /
• 제15권4호
• /
• pp.145-150
• /
• 2014

Dicyclopentadiene (DCPD)계 석유수지는 많은 분야에서 점착부여수지로 널리 사용되고 있다. 특히, 수소첨가 반응으로 수지 내 이중결합을 수소로 치환시킨 수첨(水添) DCPD계 석유수지는 무색투명의 색상과 빛과 열에 대한 우수한 안정성으로 인해, 고급 핫멜트접착제(hot melt adhesives, 이하 HMAs) 또는 열용융형 감압접착제(hot melt pressure sensitive adhesives, 이하 HMPSAs) 용도에 널리 사용되고 있다. 본 논문에서는 다양한 수첨 DCPD계 석유수지가 SIS와 SBS와 같은 SBCs를 기본 엘라스토머로 사용한 HMPSAs에서 점착부여수지로 사용될 때의 접착성능에 대해 논의하며, 점착부여 수지의 특성과 HMPSAs의 접착성능과의 상관관계를 보여준다. 높은 연화점의 점착부여수지를 사용할 수록 HMPSAs의 $T_g$, 연화점 그리고 crossover temperature가 높아졌다. 높은 방향족 모노머 함량의 점착부여수지를 사용할 경우에는, PSAs의 crossover temperature 및 연화점 감소로 확인할 수 있듯이 PSAs의 내열온도를 저하시키는 경향을 보였다.

• Journal of Biosystems Engineering
• /
• 제33권2호
• /
• pp.124-129
• /
• 2008

In this study, fuel qualities including kinematic viscosity and pour point in the various temperature, calorific value and combustion characteristics of two biodiesels based on the soybean and waste oil blended with light oil were investigated and discussed in order to figure out to confirm fuel compatibility taking the place of light oil in the hot air heater or boiler. As biodiesel content ratio increased calorific value of biodiesel decreased, and the difference was 13% between 100%-biodiesel and light oil. In general, pour points of the biodiesels were higher than light oil, and as biodiesel content ratio increased pour point increased. About 15 cSt was the pour point of biodiesels and light oil, which occurred at 3 to $4^{\circ}C$ in the biodiesels and $-25^{\circ}C$ in the light oil. Flame dimensions of biodiesels and light oil were almost same at the same combustion condition in the burner of the hot air heater. CO concentrations in the exhaustion gas were far lower than those of the light oil. Though pour point of biodiesel is a little inferior to light oil, still biodiesel can be an alternative fuel substituting for light oil in combustion system without much modifying the current oil combustion mechanism.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.69-76
• /
• 2002

The aim of this study is to provide fundamental informations that make it possible to use a cool stream and a hot stream simultaneously. We changed the pressure of compressed air that flows into a tube, the inner diameter of orifice that a cold stream exits, and the mass flow rate ratio. And in each case, we measured the temperature of a cold stream and a hot stream in each exit of a tube. Also we measured the axial and the radial temperature distribution in internal spare of a tube. From the study, fellowing conclusive remarks 7an be made. First, As the number of nozzles increase, separation point move into the hot exit. Second, When we use guide vane type nozzle, the axial temperature distribution constant over the 0.75 of air mass flow rate radio. Third, When we use Spiral type nozzle, axial and radial temperature distribution in the inner space is higher than another nozzle. Fourth, Axial and radial temperature distribution in the inner space vortex-tube is determined by separation point. And separation point is moved by changing of air mass flow rate ratio. At last, A heating apparatus is possible far vortex-tube to use.

• 소성∙가공
• /
• 제27권4호
• /
• pp.236-243
• /
• 2018

A multi-point forming die (MPFD), which has been used for producing curved plates, is capable of forming various curved plates with just one MPFD. However, in real industries, an MPFD is difficult to be adopted since the structural properties, punch strength, elastic recovery correction and dimensional accuracy become problems. In order to overcome these problems, the hot multi-point forming die (HMPFD) was proposed in this study. This HMPFD commonly provide more less spring-back and forming load than conventional MPFD. Nevertheless, this process is very difficult to form the curved plate, because the final curved shape of the plate depends on many process variables such as the punch/nozzle arrangement (height and distance), the radius of punch, contact conditions between plate and punch. In this study, the forming characteristics of HMPFD and conventional MPFD are compared with each other through the finite element analysis.