• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.2
• /
• pp.226-232
• /
• 2002

In tradition, there have been two kinds of drying methods, which are sun drying and artificial drying. The sun drying method which has been adopted traditionally has been replaced by the hot-air drying method which is one of the most general methods of artificial drying, with its simple drying system, low initial cost of drying plant, and easy operating method. But the hot-air drying method has some defects ; (1)much energy loss happens due to the discharge of hot air during the drying process, (2)control of drying rate is not easy on account of changing relative humidity of inlet air for uniform hot air temperature, (3)high temperature of floods in drying process brings about the production of low-grade drying products. Also, the hot-air drying method is inducing environmental and sanitary problems which are resulting from the emission of high temperature and high humidity air, including stick on the drying progress. Vacuum drying technique, whose drying time and 7uantity of exhausting energy is about 1/3 ~1/4 of hot air drying, is very excellent in the drying efficiency. As the results, it took about 20 hours for material to reach about 18% of the final moisture content in order to store products for a long time, from about 470% of the early moisture content at the beginning of drying, and maximum drying rate comes to about $0.35 kg/m^2hr$ at about 350% of the moisture content.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.329-333
• /
• 2003

Fruits of 'Manita', a red pepper cultivar, and 'HL', a cultivar bred for single-harvest, cultivated by direct sowing method were harvested simultaneously. The red fruits were freeze-, sun-, indoor-, hot-air $(65^{\circ}C)$, and excessive hot-air (50% longer time) dried. For Manita. ASTA values of freeze- and indoor-dried red pepper were the highest $(153.6{\sim}168.4)$, and those of sun- and hot air-dried ones were $119.2{\sim}131.5$. Excessive hot-air drying decreased the redness by about $9{\sim}15%$ compared to normal hot-air drying. For HL, ASTA values $(150.3{\sim}171.7)$ of indoor-dried red peppers were much higher than other dried peppers. Red pigment in HL was destroyed easily during sun drying, showing values of only $49.2{\sim}69.2$. By excessive hot-air drying, the redness did not decrease, compared to normal hot-air drying. The organic acid contents of both cultivars were higher in sun- and hot-air-dried ones than freeze- and indoor-dried ones. Copsaicinoid contents of both cultivars decreased up to 22% by excessive hot-air drying compared to normal hot-air drying. Sugar contents were lower in all drying methods other than freeze drying for both cultivars.

• Journal of Biosystems Engineering
• /
• v.34 no.3
• /
• pp.155-160
• /
• 2009

This study was attempted to quality characteristics of ginseng powder using molecular press dehydration(MD) method. Ginseng powder was dried using maltodextrin as dehydrating agents, and the quality of the ginseng powder was compared with that of freeze-drying and hot air-drying samples in terms of colors, moisture contents and grain size. The colors of ginseng powder using MD-drying and freeze-drying was better than hot air-dried ginseng powder. The moisture contents of ginseng powder using MD-drying was 9.49%, while freeze-drying was 4.14% and hot air-drying 11.71% after 72ball mill times. The grain size of ginseng powder using MD-drying and freeze-drying was better than hot air-drying ginseng powder. These results suggest that drying of ginseng powder using molecular press dehydration method is very efficient, because minimal cell destruction may be achieved.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.4
• /
• pp.427-434
• /
• 2000

In tradition, there have been two kinds of drying methods, which are sun drying and artificial drying. The sun drying method which has been adopted traditionally has been replaced by the hot-air drying method which is one of the most general methods of artificial drying, with its simple drying system, low initial cost of drying plant, and easy operating method. But the hot-air drying method has some defects; (1) much energy loss happens due to the discharge of hot air during the drying process, (2) control of drying rate is not easy on account of changing relative humidity of inlet air for uniform hot air temperature, (3) high temperature of foods in drying process brings about the production of low-grade drying products. Vacuum drying takes advantage of energy saving and mass production because it reduces the drying time by increasing the drying rate under low temperature condition. The aim of this paper is to develop the low temperature vacum dryer, with low initial investments and operating costs, easy operating method and trouble-free operation.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.183-188
• /
• 2009

RFID method is a non-contact automatic identification technology, which attaches microchips and antennas to an object in a tag form, to send and process information sent to the network using wireless frequency. Drying and curing process is extremely important which minimizes the resistivity of RFID antennas. This research is about the drying characteristic of conductivity ink, and analyzes and compares the hot-air drying process and infrared drying process. Also, the research was done for the improvement in drying performance by using combined process of hot-air and infrared mechanism. The experiment result shows that the hot-air or infrared drying system used alone cannot meet the required performance in drying printing method using conductivity ink. The combined drying system of hot-air and infrared ray showed resistance low enough in short drying and curing time, and this mechanism makes drying and curing process for mass and continuous production possible on-line.

• Journal of the Korean Ceramic Society
• /
• v.16 no.2
• /
• pp.69-76
• /
• 1979

This study attempted to characterize the powder and sintered specimen of Mn-Zn ferrite that was prepared by Hot Petroleum Drying Method. The results of the experiment were as follows: 1. The mixed sulfate powder prepared by Hot Petroleum Drying Method was homogeneous and very reactive. The ferrite formation of this powder occurred at lower temperature than the one prepared by Sulfate Dry Mixing Method. 2. The calcined oxide powder prepared by Hot Petroleum Drying Method was found to be agglomerated, and therefore it was very difficult to compact this powder. 3. The sintered density was 4.95g/㎤, 97% of the theoretical density, when the specimen was prepared by Hot Petroleum Drying method, calcined at 90$0^{\circ}C$ in air for 3h, sintered at 1,30$0^{\circ}C$ in air for 3h, and then cooled in nitrogen. 4. The discontinuous grain growth occurred at lower temperature in the specimen prepared by Hot Petroleum Dyring Method than in the one prepared by Sulfate Dry Mixing Method. The discontinuous grain growth was considered to be due to the presence of liquid formed by addition of CaO and $SiO_2$.

• Journal of the Korean Society of Food Culture
• /
• v.38 no.5
• /
• pp.356-364
• /
• 2023

This study compared the physicochemical properties of soybean curd residue and black soybean curd residue produced by hot air-drying and freeze-drying. Regardless of drying method, the crude protein, crude ash, crude fiber contents, pH, L, a, b color values and water soluble index were higher in soybean curd residue, whereas total polyphenol contents and antioxidant activity were higher in black soybean curd residue. Significant differences in water absorption index, oil absorption capacity and emulsion activity were observed between soybean curd residue and black soybean curd residue in freeze-drying. On the other hand, the emulsion stability was not significant difference in both hot-air drying and freeze-drying. The crude protein and crude fiber contents of soybean curd residue were not significant difference between hot-air drying and freeze-drying. Freeze-drying resulted in higher crude ash contents, pH, water absorption index, water soluble index, oil absorption capacity, emulsion activity and emulsion stability than hot-air drying. Hot-air drying have caused significantly higher water contents, water activity, total polyphenol contents and antioxidant activity in soybean curd residue than freeze-drying. In conclusion, soybean type and drying methods affect the physicochemical and quality characteristics of soybean curd residue, which could be important factors in the manufacture of processed foods.

• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.519-532
• /
• 2020

Because lotus root has a short shelf life, the quality easily deteriorates. Thus, the harvested lotus roots are processed into a variety of products. Drying is one of the simplest food preservation methods, which can increase food stability. However, the convective drying method takes a long time and requires high energy consumption. Combination drying methods have emerged to overcome the limitations of the convective drying method. This study investigated the drying characteristics of lotus root and determined the optimal drying model of lotus root depending on the microwave and hot-air combination drying conditions. The lotus root slices (5 mm in thickness and 40 mm in diameter) were dried by different drying conditions that were combined with three microwave power levels (50, 100, and 150 W) and two hot air temperatures (50 and 60℃) at a velocity of 5 m·s^-1. Eight drying models were tested to evaluate the fit to the experimental drying data, and the effective moisture diffusion (D_eff) values of the lotus root slices dried by combination drying were estimated. The combination drying time of the lotus root was significantly reduced with the high air temperature and microwave power. The effective moisture diffusion (D_eff) of lotus root was more affected by the air temperature than microwave power intensity. Logarithmic model was most suitable to describe the drying curve of lotus root in the microwave-hot air combination drying method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.9
• /
• pp.1353-1358
• /
• 2010

Improvement in the utilization of grape pomace, antioxidant activities and antioxidant compounds of grape pomace was analyzed to clarify the influence of drying method such as $80^{\circ}C$ hot air and freeze ($-70^{\circ}C$) drying process. For proximate composition, crude protein and fat contents of hot air drying sample were higher than freeze drying sample. The lightness and redness values of freeze drying sample were higher than hot air drying sample, but yellowness of hot air drying sample was higher. The contents of total polyphenols and anthocyanins were higher in freeze drying sample. DPPH radical scavenging activity and ABTS scavenging activity of freeze drying sample were higher than hot air drying sample. The reducing power and FRAP value of hot air drying sample was higher than freeze drying sample. The result indicated that freeze drying method is slightly better than hot air drying method for antioxidant compounds and antioxidant activity.

• Food Science of Animal Resources
• /
• v.32 no.5
• /
• pp.531-539
• /
• 2012

To determine the effects of various drying methods on the quality characteristics of beef jerky from low-valued cuts, Hanwoo beef shank muscles were either hot air-dried, shade-dried, or sun-dried. The physicochemical quality and microbiological safety of the Hanwoo beef jerky were analyzed during a storage of $25^{\circ}C$. Moisture content and water activity ($a_w$) of the samples decreased as the time period of storage increased, regardless of the drying condition (p<0.05). Shade-dried jerky showed higher $a_w$ compared to others after storage of 20 d (p<0.05). The pH value of hot air-dried jerky was higher than those of others (p<0.05). For color properties, sun-dried samples showed higher redness ($a^*$) and yellowness ($b^*$) compared with the properties of others (p<0.05). The hot air-dried jerky showed higher shear force values than the sun-dried or the shade-dried jerky after 10 and 20 d (p<0.05). However, the total plate counts (TPCs) of naturally dried jerky (shade and sundried) were higher than hot-air dried jerky after storage of 10 and 20 d (p<0.05). With regard to sensory properties, naturally dried jerky showed higher tenderness, juiciness, and overall acceptability scores than the hot air-dried jerky (p<0.05). In conclusion, although natural drying appears to be more susceptible to microbiological contamination than hot air-drying, the natural drying method seems to result in superior quality than the hot air drying method.