• 제목/요약/키워드: hot video

검색결과 33건 처리시간 0.024초

VOD 서비스를 위한 채널 예약 배치-패칭 방법의 설계 및 평가 (Design and Evaluation of a Channel Reservation Batch-Patching Technique for VOD Services)

  • 하숙정;이경숙;배인한
    • 한국멀티미디어학회논문지
    • /
    • 제7권3호
    • /
    • pp.357-367
    • /
    • 2004
  • VOD 시스템에서 비디오 서버가 지원할 수 있는 채널의 개수는 서버의 통신 대역폭에 의해 결정되므로 비디오 서버의 가용채널 수는 제한되어 있다. 멀티캐스트 데이터를 공유함으로써 비디오 서버의 네트워크 입출력 대역폭을 절감하기 위해 일괄처리, 패칭, 배치-패칭과 같은 멀티캐스트 방법들이 제안되 었다. 본 논문에서는 인기 비디오 요청들에 대해 먼저 배칭 방법을 적용한 후 배치들에 대해 패칭 방법을 수행하는 채널 예약 배치-패칭 방법을 제안한다. 그리고 제안하는 방법은 많은 인기 비디오 요청을 위하여 비디오 서버의 채널 용량 중 일부를 예약하므로 인기 비디오 요청들을 이탈없이 서비스할 수 있다. 제안하는 방법의 성능을 시뮬레이션을 통하여 평균 서비스 지연 시간, 이탈율, 공평성, 프레임 절감율 항목에 대해 패칭 방법과 배치-패칭 방법의 성능과 비교한다.

  • PDF

Quality Adaptation of Intra-only Coded Video Transmission over Wireless Networks

  • Shu Tang;Yuanhong Deng;Peng Yang
    • Journal of Information Processing Systems
    • /
    • 제19권6호
    • /
    • pp.817-829
    • /
    • 2023
  • Variable wireless channel is a big challenge for real-time video applications, and the rate adaptation of realtime video streaming becomes a hot topic. Intra-video coding is important for high-quality video communication and industrial video applications. In this paper, we proposed a novel adaptive scheme for real-time video transmission with intra-only coding over a wireless network. The key idea of this scheme is to estimate the instantaneous remaining capacity of the network to adjust the quality of the next several video frames, which not only can keep low queuing delay and ensure video quality, but also can respond to bandwidth changes quickly. We compare our scheme with three different schemes in the video transmission system. The experimental results show that our scheme has higher bandwidth utilization and faster bandwidth change response, while maintaining low queuing delay.

다시점 비디오 코딩 (Multi-view video coding)

  • 박시내;심동규
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.57-60
    • /
    • 2008
  • In this paper, we describe the technology about multiview video coding which is a hot issue in diqital video coding. A multiview video coding (MVC) is able to provide a free view point and 3-D effect, resulting that it gives more realism to users. Now, the MVC has been standardized as an amendment of H.264/AVC. In this paper, we present not only the MVC standard but also relevant techniques which were under consideration in the MVC standardization.

  • PDF

임의 속도 탐색을 위한 가변 비트율 압축 비디오 데이타의 저장 및 배치기법 (Variable-bit-rate compressed video storage and placement scheme for arbitrary-speed retrievals)

  • 권택근;이석호;최양희
    • 전자공학회논문지B
    • /
    • 제33B권8호
    • /
    • pp.15-21
    • /
    • 1996
  • This paper describes data placement schemes that provide uniform and balanced to multiple disks load for retrievals of VBR (variable bit rate) video at varying retrieval speeds. To support maximum concurent users at arbitrary-speed playbacks in a disk-arry based system, the hot spot disks should be carefully avoided. In this paper, we extend the proposed scheme, prime round-robin(PRR), for VBR video. In addition, we have compared the performance of PRR and PRR (PRR extension).

  • PDF

HOT-SMOKE TESTS IN TWO UNDERGROUND RAILWAY STATIONS WITH MOVING TRAINS

  • Allan, Hugh
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
    • /
    • pp.472-476
    • /
    • 1997
  • Hot-smoke testing in Australia has progressed to the stage where there is an Australian Standard for these tests. The purpose of such tests is twofold: firstly they can validate computer modeling predictions for smoke movement, and secondly they can demonstrate that the smoke control systems and associated fire safety systems function satisfactorily. Hot-smoke tests were carried out in March 1997 at two of Sydney's underground railway stations, namely St James and Museum. The purpose of the tests was to demonstrate that the smoke control systems performed their functions as intended. Tests were carried out in the concourses and on the platforms, and trains ran during the tests so that the effect of moving trains on smoke movement could be observed. A total of five tests were carried out and video recordings were taken of each. This is the first time that hot-smoke tests have been carried out in an underground station with trains running. The paper discusses some of the interesting observations and the problems identified by the tests.

  • PDF

PIV에 의한 가정용 온수펌프의 유동장 계측 (Measurement of Flow Field in a Domestic Hot-Water Pump by PIV)

  • 이현;임유청;김재현;이영호
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.264-271
    • /
    • 1999
  • The present experimental study is aimed to investigate the flow characteristics of the high-speed flow field within hot-water pump by PIV(Particle Image Velocimetry). As multi-point simultaneous velocity acquisition, 2-D PIV system based upon the two-frame gray-level cross correlation method is adopted using PC frame-grabber and simple video system. Gated image intensifier CCD Camera to cope with illumination problem is arranged for accurate PIV measurement of high-speed complex flow. The velocity vector distribution, velocity profile, and kinetic energy are represented quantitatively at the full-scale region for the deeper understanding of the unsteady flow characteristics in a pump.

  • PDF

고온벽면에서의 액적연료의 증발 및 착화에 관한 연구 (A Study on the Evaporation and Ignition of Single Fuel Droplet on the Hot Surface)

  • 송규근
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제26권1호
    • /
    • pp.132-137
    • /
    • 2002
  • Recently, impinging spray is used for atomization of diesel engine, but it bring on adhesion of fuel. Therefore, we studied about droplet behavior on high temperature plate changing the size of droplet, surface temperatures, and surface roughness of plate. In this study, We studied to confirm experimentally about mechanism of evaporation and ignition process of single fuel droplet. We observed evaporation time, evaporation appearance and ignition delay time by the photopraphs of 8mm video camera. Experimental results are summarized as follows: 1. The boiling point of fuel affect a evaporation and ignition process. 2. The surface roughness affect a evaporation time. 3. The ignition delay time relate to evaporation characteristic.

화제 억제제가 첨가된 수용액 액적의 증발냉각 현상 (Evaporation Cooling Phenomena of Droplets Containing Fire Suppression Agents)

  • 유갑종;방창훈;김현우
    • 설비공학논문집
    • /
    • 제13권9호
    • /
    • pp.895-903
    • /
    • 2001
  • Evaporation cooling phenomena of droplets containing fire suppression agents on a hot metal surface were experimentally investigated. Solution of water containing potassium acetate (30-50% by weight) and sodium bromide (10-30% by weight) were used in the experiments, and surface temperatures were ranged from 70-116$^{\circ}C$. The evaporation time of the droplet on the heated surface was determined by using frame-by-frame analysis of the video records. It is found that the apparent evaporation time is shorter in turns of pure water, sodium bromide solution and potassium acetate solution. However, the time averaged heat flux is higher in turns of pure water, sodium bromide solution and potassium acetate solution. In-depth temperature variation of the hot metal does not occur significantly by the kinds of additive.

  • PDF

물액적에 의한 미연소면의 냉각에 관한 실험적 연구 (An Experimental Study on the Cooling of Unburned Surface due to Water Droplet)

  • 방창훈;김정수;예용택
    • 한국화재소방학회논문지
    • /
    • 제14권3호
    • /
    • pp.13-18
    • /
    • 2000
  • 본 연구의 목적은 물액적에 의한 미연소면의 냉각 특성을 연구하는 것이다. 고온고체로는 황동, 탄소강, 동을 사용하였으며 온도범위는 $70^{\circ}$~$116^{\circ}$이다. 액적의 직경은 2.4 mm~3.0 mm로 하였다. CCD카메라를 이용하여 액적의 증발과성을 기록하였으며, 증발시간은 비디오에 기록된 프레임을 분신하여 추하였다. 열전도도가 가장 큰 동의 경우 액적이 떨어진 직후 조금 냉각되었다가 일정 온도를 유지하지만 열전도도가 낯은 탄소강의 경우는 증발시간 동안 약 $1^{\circ}$ 정도의 온도 기울기가 나타났다. 고체 표면에서의 액적 증발시 무차원 액적체적은 가열체의 재질에 상관없이 무차원 증밭시간이 증가할수록 선형적으로 감소한다.

  • PDF

Cache Optimization on Hot-Point Proxy Caching Using Weighted-Rank Cache Replacement Policy

  • Ponnusamy, S.P.;Karthikeyan, E.
    • ETRI Journal
    • /
    • 제35권4호
    • /
    • pp.687-696
    • /
    • 2013
  • The development of proxy caching is essential in the area of video-on-demand (VoD) to meet users' expectations. VoD requires high bandwidth and creates high traffic due to the nature of media. Many researchers have developed proxy caching models to reduce bandwidth consumption and traffic. Proxy caching keeps part of a media object to meet the viewing expectations of users without delay and provides interactive playback. If the caching is done continuously, the entire cache space will be exhausted at one stage. Hence, the proxy server must apply cache replacement policies to replace existing objects and allocate the cache space for the incoming objects. Researchers have developed many cache replacement policies by considering several parameters, such as recency, access frequency, cost of retrieval, and size of the object. In this paper, the Weighted-Rank Cache replacement Policy (WRCP) is proposed. This policy uses such parameters as access frequency, aging, and mean access gap ratio and such functions as size and cost of retrieval. The WRCP applies our previously developed proxy caching model, Hot-Point Proxy, at four levels of replacement, depending on the cache requirement. Simulation results show that the WRCP outperforms our earlier model, the Dual Cache Replacement Policy.