• Journal of Soil and Groundwater Environment
• /
• v.13 no.1
• /
• pp.1-12
• /
• 2008

The purpose of this study is to characterize the hydrogeochemical characteristics of hot spring waters and to interpret the source of noble gases and the geochemical environment of the hot spring waters distributed along the eastern area of the Korean peninsula. For this purpose, We carried out the chemical, stable isotopic and noble gas isotopic analyses for eleven hot spring water and fourteen hot spring gas samples collected from six hot spring sites. The hot spring waters except the Osaek hot spring water show the pH range of 7.0 to 9.1. However, the Osaek $CO_2$-rich hot spring water shows a weak acid of pH 5.7. The temperature of hot spring waters in the study area ranges from $25.7^{\circ}C$ to $68.3^{\circ}C$. Electrical conductivity of hot spring waters varies widely from 202 to $7,130{\mu}S/cm$. High electrical conductivity (av., $3,890{\mu}S/sm$) by high Na and Cl contents of the Haeundae and the Dongrae hot spring waters indicates that the hot spring waters were mixed with seawater in the subsurface thermal system. The type of hot springs in the viewpoint of dissolved components can be grouped into three types: (1) alkaline Na-$HCO_3$ type including sulfur gas of the Osaek, Baekam, Dukgu and Chuksan hot springs, and (2) saline Na-Cl type of the Haeundae and Dongrae hot springs, and (3) weak acid $CO_2$-rich Na-$HCO_3$ type of Osaek hot spring. Tritium ratios of the Haeundae and the Dongrae hot springs indicate different residence time in their aquifers of older water of $0.0{\sim}0.3$ TU and younger water of $5.9{\sim}8.8$ TU. The ${\delta}^{18}O$ and ${\delta}D$ values of hot spring waters indicate that they originate from the meteoric water, and that the values also reflect a latitude effect according to their locations. $^3He/^4He$ ratios of the hot spring waters except Osaek $CO_2$-rich hot spring water range from $0.1{\times}10^{-6}$ to $1.1{\times}10^{-6}$ which are plotted above the mixing line between air and crustal components. It means that the He gas in hot spring waters was originated mainly from atmosphere and crust sources, and partly from mantle sources. The Osaek $CO_2$-rich hot spring water shows $3.3{\times}10^{-6}$ in $^3He/^4He$ ratio that is 2.4 times higher than those of atmosphere. It provides clearly a helium source from the deep mantle. $^{40}Ar/^{36}Ar$ ratios of hot spring water are in the range of an atmosphere source.

• Journal of Oriental Neuropsychiatry
• /
• v.19 no.2
• /
• pp.77-93
• /
• 2008

Objective : This experiment was designed to investigate the effect of the CBD hot water extract & ultra-fine Powder on Alzheimer's Disease Model Induced by ${\beta}A$. Method : The effects of the CBD hot water extract on expression of interleukin-1 beta($IL-1{\beta}$), $TNF-{\alpha}$ mRNA and production of IL-6, $TNF-{\alpha}$ in BV2 microglial cell line treated by lipopolysacchaide(LPS). The effects of the CBD hot water extract & ultra-fine powder on (1) the behavior (2) expression of $IL-1{\beta}$, tumor necrosis factor-alpha($TNF-{\alpha}$), (3) the infarction area of the hippocampus in Alzheimer's diseased mice induced with ${\beta}A$ were investigated. Result : The CBD hot water extract suppressed the expression of $IL-1{\beta}$, $TNF-{\alpha}$ mRNA in BV2 microglia cell line treated with LPS. The CBD hot water extract significantly suppressed the production of $IL-1{\beta}$, $TNF-{\alpha}$ in BV2 microglial cell line treated with LPS. The CBD hot water extract & ultra-fine powder a significant inhibitory effect on the memory deficit was shown for the mice with Alzheimer's disease induced by ${\beta}A$ in the Morris water maze experiment, which measured step-through latency and distance movement-through latency. The CBD hot water extract & ultra-fine powder significantly suppressed the expression of $IL-l{\beta}$ and $TNF-{\alpha}$ protein in the microglial cell of mice with Alzheimer's disease induced by ${\beta}A$. The CBD hot water extract & ultra-fine powder suppressed the over-expression of AChE activity in the serum of the mice with Alzheimer's disease induced by ${\beta}A$. The CBD hot water extract & ultra-fine powder reduced infarction area of hippocampus, in the mice with Alzheimer's disease induced by ${\beta}A$. Conclusions : These results suggest that the CBD hot water extract & ultra-fine powder may be effective for the prevention and treatment of Alzheimer's disease. Investigation into the clinical use of the CBD hot water extract & ultra-fine powder for Alzheimer's disease is suggested for future research.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.5
• /
• pp.1178-1191
• /
• 2008

This experiment was designed to investigate the effect of the SSJHT hot water extract & ultra-fine Powder on Alzheimer's Disease Model Induced by ${\beta}A$. The effects of the SSJHT hot water extract on expression of IL-1RA, $IL-1{\beta}$$, IL-6, IL-10, $TNF-{\alpha}$, NOS-II, COX-2 mRNA and production of $IL-1{\beta}$, IL-6, $TNF-{\alpha}$ in BV2 microglial cell line treated by lipopolysacchaide(LPS). The effects of the SSJHT hot water extract & ultra-fine powder on (1) the behavior (2) expression of $IL-1{\beta}$, $TNF-{\alpha}$, MDA, CD68, CD11b and AChE (3) and the infarction area of the hippocampus in Alzheimer's diseased mice induced with ${\beta}A$ were investigated. The SSJHT hot water extract suppressed the expression of $IL-1{\beta}$, IL-6 and $TNF-{\alpha}$, NOS-II, COX-2 mRNA and increased IL-1RA, IL-10 in BV2 microglia cell line treated with LPS. The SSJHT hot water extract suppressed the production of $IL-1{\beta}$, IL-6, $TNF-{\alpha}$ significantly in BV2 microglial cell line treated with LPS. The SSJHT hot water extract & ultra-fine powder a significant inhibitory effect on the memory deficit was shown for the mice with Alzheimer's disease induced by ${\beta}A$ in the Morris water maze experiment, which measured step-through latency. The SSJHT hot water extract & ultra-fine powder suppressed the expression of $TNF-{\alpha}$$, $L-1{\beta}$ protein significantly in the microglial cell of mice with Alzheimer's disease induced by ${\beta}A$. The SSJHT hot water extract & ultra-fine powder reduced the MDA and suppressed the over-expression of CD68, CD11b in the mice with Alzheimer's disease induced by ${\beta}A$. The SSJHT hot water extract & ultra-fine powder significantly decreased AChE activity in the serum of the mice with Alzheimer's disease induced by ${\beta}A$. The SSJHT hot water extract & ultra-fine powder reduced infarction area of hippocampus. and controlled the injury of brain tissue in the mice with Alzheimer's disease induced by ${\beta}A$. The results suggest that the SSJHT hot water extract & ultra-fine powder may be effective for treatment of Alzheimer's disease. Investigation into the clinical use of the SSJHT hot water extract & ultra-fine powder for Alzheimer's disease is suggested for future research.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.1
• /
• pp.8-13
• /
• 2006

This study was carried out to investigate drying methods for keeping freshness and active components of aerial part of Saururus chinensis. Chopped samples were prepared using hot air drying, hot air drying + roasting, presteamed + hot air drying, freeze drying, and sun drying. Drying time was shorter $88{\sim}93%$ in hot air drying and freeze drying than in sun drying. Percentage of dry matter was higher in the order of freeze drying > sun drying > hot air drying, and moisture content in the order of sun drying > hot air drying > freeze drying. The contents of total phenolics and quercetin related substances were greater in the order of freeze drying > hot air drying > sun drying, while were decreased due to treatments before or after hot air drying. Electron donating ability (EDA) was highest in freeze drying, and showed a little difference between hot air drying and sun drying, but was increased because of treatments before or after hot air drying. In color values, the a value was lower in the order of freeze drying < hot air drying < sun drying. The contents of active components of plant parts of hot air dried were higher in the order of flower >leaf > chopped sample > stem. EDA showed similar tendency with those. The a value was lower in the order of leaf < chopped sample < flower < stem. As a result, freeze drying of chopped samples or hot air drying of leaf and flower were effective to maintain qualities of aerial part of Saururus chinensis.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.62-67
• /
• 2019

This study was focused on the design and the performance analysis of integral Hot BoP for recovering waste heat from high-temperature exhaust gas in 2 kW class solid oxide fuel cell (SOFC). The hot BoP system was consisted of a catalytic combustor, air preheater and steam generator for burning the stack exhaust gas and for recovering waste heat. In the design of the system, the maximum possible heat transfer was calculated to analyze the heat distribution processes. The detail design of the air preheater and steam generator was carried out by solving the heat transfer equation. The hot BoP was fabricated as a single unit to reduce the heat loss. The simulated stack exhaust gas which considered SOFC operation was used to the performance test. In the hot BoP performance test, the heat transfer rate and system efficiency were measured under various heat loads. The combustibility with the equivalent ratio was analyzed by measuring CO emission of the exhaust gas. As a result, the thermal efficiency of the hot BoP was about 60% based on the standard heat load of 2 kW SOFC. CO emission of the exhaust gas rapidly decreased at an equivalent ratio of 0.25 or more.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.50-53
• /
• 2008

It's so difficult to obtain simultaneously both product quality and improvement of the productivity of which products are in hot aluminum extrusion process. But significant improvements in productivity and extrudate quality result from die cooling system using nitrogen gas injection during aluminum hot extrusion. These benefits are due primarily to cooling effect nitrogen gas and removal of excess heat in the extrudate temperature. This investigation is carried out hot extrusion experiment, also compared cooling system with non-cooling system to inspect cooling effects on hot aluminum extrusion. The purpose of this investigation is estimated the grain growth fur the extrudate quality, and the ram speed for the improvement of the productivity.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.222-225
• /
• 2008

Due to new requirements of the automotive industry, concerning lightweight and non-corroding construction, new production methods, The Hot Air Forming process of aluminum alloys are of special interest. The disadvantage of aluminum alloy is the poorer formability compared to steel. The Hot Air Forming process is one of the forming process receiving recent attention. In the current study, Fabrication of aluminum rear subframe has been attempted using seam and seamless aluminum tubes. On the base of hot workability of the extruded tube and PAM-STAMP simulation results, Optimum condition for fabricating aluminum rear sub(lame parts by Hot Air Forming could be determined.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.307-310
• /
• 2009

Nowadays, the usage of high strength steel has been growing in automobile industry mainly as structural parts since for its lightweight and high strength properties the oil crisis happened. Owing to poor formability, complex-shaped high-strength steel components are invariably produced through hot press forming. The high-strength steel sheets are in so me instances used with an Al-Si-coating with a view to prevent scaling of components during hot press forming. How ever, friction and fracture characteristics of Al-Si-coated high-strength steel during hot press forming process have not yet been investigated. In this paper, the formed parts which were formed in hot bending process were investigated by using EDS. SEM and nano indenter in order to analysis the coating layer behavior.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.211-218
• /
• 2000

Hot spot behaviors on the disk-pad contact surface during a braking operation have been analyzed for a ventilated disk brake using the finite element method. Hot spots which were studied using a coupled thermal-mechanical analysis technique are influenced by all of the mechanical, thermal, elastic and plastic processes that are involved in braking cycles, but their temperature gradients are most affected by rubbing speeds, braking forces, and design parameters between the disk and the pad. Undesirable hot spots that are generated by local thermoelastic instabilities are intended to be removed by optimized design parameters and material properties. In this study, a three-dimensional numerical method for the demonstration of hot spot behaviors has been applied to the rubbing surfaces between the disk and the pad.

• Coupled systems mechanics
• /
• v.1 no.2
• /
• pp.165-182
• /
• 2012

Macroscopic hot spots formed due to the large thermal gradients at the surface of the disc brake rotor, make the rotor to fail or wear out early. Thermo-elastic deformation results in contact concentration, leading to the non uniform distribution of temperature making the disc susceptible to hot spot formation. The formation of one hot spot event will predispose the system to future hot spotting at the same location. This leads to the complete thermo-elastic instability in the disc brakes; multitude parameters are responsible for the thermo elastic instability. The predominant factor is the sliding velocity and above a certain sliding velocity the instability of the brake system occurs and hot spots is formed in the surface of the disc brake. Commercial finite element package ABAQUS(R) is used to find the temperature distribution and the result is validated using Rowson's analytical model. A coupled analysis methodology is evolved for the automotive disc brake from the transient thermo-elastic contact analysis. Temperature variation is studied under different sliding speeds within the operation range.