• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.55-60
• /
• 2006

Thermally stable and solution-processable poly(N-arylcarbazole-alt-aniline) copolymers with high structural integrity were synthesized in good yields via palladium-catalyzed polycondensation of aniline with corresponding N-arylcarbazole monomers such as N-(2-ethylhexyloxyphenyl)-3,6-dibromocarbazole,bis[6-bromo-N-(2-ethylhexyloxyphenyl)carbazole-3-yl] and N-(4-(2-ethylhexyl)-3,5-dibromomethylene-phenyl) carbazole, respectively. The optical and electrochemical properties of these copolymers were measured and compared with those of poly(N-alkylcarbazole-alt-aniline) copolymer. All synthesized poly(N-arylcarbazole-alt-aniline) copolymers showed maximum UV-Vis absorption peaks at around 300 nm in THF solution, and exhibited maximum photoluminescence peaks in the blue emission range from 430 to 460 nm. It was also found that poly(N-arylcarbazole-alt-aniline) copolymers had wider band gap energy than poly(N-alkylcarbazole-alt-aniline) copolymer.

• Journal of the Korean Ceramic Society
• /
• v.45 no.1
• /
• pp.1-29
• /
• 2008

In last two decades, an impressive progress has been recorded in terms of developing new materials or refining existing material composition/microstructure in order to obtain better performance in biomedical applications. The success of such efforts clearly demands better understanding of various concepts, e.g. biocompatibility, host response, cell-biomaterial interaction. In this article, we review the fundamental understanding that is required with respect to biomaterials development, as well as various materials and their properties, which are relevant in applications, such as hard tissue replacement. A major emphasize has been placed to present various design aspects, in terms of materials processing, of ceramics and polymer based biocomposites, Among the bioceramic composites, the research results obtained with Hydroxyapatite (HAp)-based biomaterials with metallic (Ti) or ceramic (Mullite) reinforcements as well as $SiO_2-MgO-Al_2O_3-K_2O-B_2O_3-F$ glass ceramics and stabilized $ZrO_2$ based bioinert ceramics are summarized. The physical as well as tribological properties of Polyethylene (PE) based hybrid biocomposites are discussed to illustrate the concept on how can the physical/wear properties be enhanced along with biocompatibility due to combined addition of bioinert and bioactive ceramic to a bioinert polymeric matrix. The tribological and corrosion properties of some important orthopedic metallic alloys based on Ti or Co-Cr-Mo are also illustrated. At the close, the future perspective on orthopedic biomaterials development and some unresolved issues are presented.

• Journal of Microbiology
• /
• v.41 no.4
• /
• pp.295-299
• /
• 2003

Adenovirus (Ad) precursor to the terminal protein (pTP) plays an essential roles in the viral DNA replication. Ad pTP serves as a primer for the synthesis of a new DNA strand during the initiation step of replication. In addition, Ad pTP forms organized spherical replication foci on the nuclear matrix (NM) and anchors the viral genome to the NM. Here we identified the interferon inducible gene product 1-8D (Inid) as a pTP binding protein by using a two-hybrid screen of a HeLa cDNA library. Of the clones obtained in this assay, nine were identical to the Inid, a 13-kDa polypeptide that shares homology with genes 1-8U and Leu-13/9-27, most of which have little known functions. The entire open reading frame (ORF) of Inid was cloned into the tetracycline inducible expression vector in order to determine the biological functions related with adenoviral infection. When Inid was introduced to the cells along with adenoviruses, fifty to sixty percent of Ad-infected cells expressing Inid had rounded morphology, which was suggestive of apoptosis. Results from the terminal deoxynucleotidyl transferase (TdT) and DNA fragmentation assays confirmed that Inid induces apoptosis in Ad-infected or in uninfected cells. The Inid binding to pTP may target the cell for apoptotic destruction as a host defense mechanism against the viral infection.

• Elastomers and Composites
• /
• v.35 no.3
• /
• pp.188-195
• /
• 2000

The conducting composites were prepared by emulsion polymerization with poly (acrylonitrile-co-butadiene) (NBR) as a matrix and polypyrrole (PPY) as a conducting polymer. Among several surfactants, the electrical conductivity of the composite which was polymerized by dodecyl sodium sulfate (DSS) was the best. The film of composite was prepared by compression molding. The electrical conductivity was measured by 4 probes method as a function of PPY and temperature. When the content of PPY was 25 wt%, the electrical conductivity of composite was increased up to 1.17 S/cm. The percolation threshold showed at the vicinity of 15 wt% PPY content.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.489-500
• /
• 2017

It is not rare that pseudotachylite, dark colored rock with glassy texture, is recognizable in deep core samples drilled up to 900 m from the surface. Pseudotachylite with widths varying few to 20 cm is sharply contacted or interlayered with the host rocks composed of Jurassic granite and Precambrian amphibolite gneiss, showing moderately ductile deformation or slight folding. Pseudotachylite occurring at varying depths in the deep drill core are slightly different in texture and thickness. There is evidence of fault gouge at shallower depths, although brittle deformation is pervasive in most drill cores and pseudotachylite is identified at random depth intervals. Under scanning electron microscope (SEM), it is evident that the surface of pseudotachylite is characterized by a smooth, glassy matrix even at micrometer scale and there is little residual fragments in the glass matrix except microcrystals of quartz with embayed shape. Such textural evidence strongly supports the idea that the pseudotachylite was generated through the friction melting related to strong seismic events. Based on X-ray diffraction (XRD) quantitative analysis, it consists of primary minerals such as quartz, feldspars, biotite, amphibole and secondary minerals including clay minerals, calcite and glassy materials. Such mineralogical features of fractured materials including pseudotachylite indicate that the fractured zone might form at low temperatures possibly below $300^{\circ}C$, which implies that the seismic activity related to the formation of pseudotachylite took place at shallow depths, possibly at most 10 km. Identification and characterization of pseudotachylite provide insight into a better understanding of the paleoseismic activity of deep grounds and fundamental information on the stability of candidate disposal sites for high-level radioactive waste.

• Journal of Periodontal and Implant Science
• /
• v.33 no.4
• /
• pp.585-597
• /
• 2003

Porphyromonas gingivalis has been implicated as an important periodontophathic bacterium in the etiology and progression of periodontal diseases. It has been reported that P.gingivalis may mediate periodontal destruction not only directly through its virulence factors, but also indirectly by including complex host mediated inflammatory reponses. The purpose of this study was t o evaluate the effects of P.gingivalis on the bone formation and resorption by osteoblasts. For this purpose, after determining the concentration below which sonicated P.gingivalis extracts (SPEs) have no cytotoxicity on mouse calvarial primary osteoblastic (POB) cells, we investigated the effects of SPEs on the alkaline phosphatase (ALP) activity, matrix metalloproteinase (MMP) expression (MMP-2, -9, 13), and prostaglandin $E_2$ ($PGE_2$) release in POB cells by treatment with SPEs below that concentration. The results were as follows; 1. SPEs showed no cytotoxic effect on POB cells up to a concentration of 1 ${\mu}m$/ml. 2. The treatment with SPEs reduced ALP activity in a dose-dependent manner in POB cells, In addition, when we investigated the effect of SPEs (1 ${\mu}m$/ml) on ALP activity for different exposure periods, statistically significant inhibition of ALP activity was shown at 2 days of exposure, and further significant inhibition occurred by extending the periods of exposure. 3. The treatment with SPEs stimulated the gene expression of MMP-9 in POB cells. 4. The pre-treatment with SPEs increased the amount of $PGE_2$ released in POB cells. In summary, the present study shows that P.gingivalis could inhibit osteogenesis and stimulate bone resorption not only by reducing ALP activity but also by increasing MMP-9 mRNA expression in osteoblasts, possibly through an endogenous $PGE_2$ pathway. In addition, our results suggest that if P.gingivalis affects osteoblasts in early differentiation stage, such effects by P. gingivalis could be irreversible.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.30 no.1
• /
• pp.6-16
• /
• 2015

This study established the genetic characterisation of 10 microsporidian isolates infecting non-mulberry silkworms (Antheraea assamensis and Samia cynthia ricini) collected from biogeographical forest locations in the State of Assam, India, using PCR-based markers assays: inter simple sequence repeat (ISSR) and random amplified polymorphic DNA (RAPD). A Nosema type species (NIK-1s_mys) was used as control for comparison. The shape of mature microsporidian spores were observed oval to elongated, measuring 3.80 to $4.90{\mu}m$ in length and 2.60 to $3.05{\mu}m$ in width. Fourteen ISSR primers generated reproducible profiles and yielded 178 fragments, of which 175 were polymorphic (98%), while 16 RAPD primers generated reproducible profiles with 198 amplified fragments displaying 95% of polymorphism. Estimation of genetic distance coefficients based on dice coefficients method and clustering with un-weighted pair group method using arithmetic average (UPGMA) analysis was done to unravel the genetic diversity of microsporidians infecting Indian muga and eri silkworm. The similarity coefficients varied from 0.385 to 0.941 in ISSR and 0.083 to 0.938 in RAPD data. UPGMA analysis generated dendrograms with two microsporidian groups, which appear to be different from each other. Based on Euclidean distance matrix method, 2-dimensional distribution also revealed considerable variability among different identified microsporidians. Clustering of these microsporidian isolates was in accordance with their host and biogeographic origin. Both techniques represent a useful and efficient tool for taxonomical grouping as well as for phylogenetic classification of different microsporidians in general and genotyping of these pathogens in particular.

• Journal of the Korean Chemical Society
• /
• v.42 no.5
• /
• pp.531-538
• /
• 1998

The ion selective membrane electrode made of calix[4]arene-based host 1 as ionophore, poly (vinyl chloride) (PVC) as matrix and dioctylsebacate (DOS) as a plasticizer was studied. The potential responses of this membrane electrode to alkali, alkaline earth and transition metal cations were investigated. Especially this membrane electrode was turned out to be affinitive for $Pb^{2+}$ in the deionized water. It was observed that the response was linear in the concentration range from $1.0 \times 10^{-1} M to 1.0 \times 10^{-6} M of Pb^{2+}$ and its slope (26.5 mV/decade) was near to the sub-Nernstian response in deionized water. Also, the potential was maintained constantly in the range of pH $4.00 \sim 12.00$, which supports the potential usage as $Pb^{2+}$ affinitive electrode in the deionized water.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.4
• /
• pp.576-582
• /
• 2002

Probiotics are live microbial feed supplements which beneficially affect the host animal by improving its intestinal microflora. To select the best Lactobacillus spp. as a chicken probiotic, probiotic characteristics of 10 selected Lactobacillus strains isolated from chicken cecum or obtained from KCTC were investigated. The strains were examined for resistance to pH 2.0 and 0.3% oxgall, and adhesion to cecal mucus and cecal epithelial cells. All strains grew in MRS containing 0.3% oxgall. However, Lb. plantarum AYM-10, Lb. fermentum YL-3, AYM-3, and Lb. paracasei YL-6 showed relatively high resistance to 0.3% oxgall. Lb. fermentum YL-3, YM-5, AYM-3, and Lb. paracasei YL-6 survived 4 hours of incubation at pH 2.0. Lb. fermentum YL-3, KCTC 3112, and Lb. plantarum AYL-5 were strongly adhesive to cecal mucus, while the rest showed moderate or low adhesion. Lb. plantarum AYM-10, AYL-1, and AYL-5 had good adhering properties to cecal epithelial cells (30.7$\pm$10.82, 40.2$\pm$20.90, and 14.5$\pm$4.22, respectively). Lb. fermentum YL-3, AYM-3, and KCTC 3547 showed Intermediate adhesion ability, and Lb. plantarum showed better adhesion ability to cecal epithelial cells than Lb. fermentum. Attached Lb. fermentum YL-3 to cecum after 60 min incubation was confirmed using CLSM. Lb. fermentum YL-3 attached to a matrix which was composed of a mucus layer adjacent to intracrypts and pericryptal region. Some Lb. fermentum YL-3 bound to mucosal epithelial cells. From these results, Lb. fermentum YL-3 was selected as a chicken probiotic. In vivo trials of chicks inoculated with Lb. fermentum YL-3 had decreased Salmonella population in cecal contents and livers (p<0.5).

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.3
• /
• pp.121-124
• /
• 2013

The incorporation of 90 nm alumina particles into an epoxy matrix to form a composite microstructure is described in present study. It is shown that the use of ultrafine particles results in a substantial change in the behavior of the composite, which can be traced to the mitigation of internal charges when a comparison is made with conventional $Al_2O_3$ fillers. A variety of diagnostic techniques have been used to augment pulsed electro-acoustic space charge measurement to provide a basis for understanding the underlying physics of the phenomenon. It would appear that, when the size of the inclusions becomes small enough, they act cooperatively with the host structure and cease to exhibit interfacial properties. It is postulated that the $Al_2O_3$ particles are surrounded by high charge concentrations. Since $Al_2O_3$ particles have very high specific areas, these regions allow limited charge percolation through $Al_2O_3$ filled dielectrics. The practical consequences of this have also been explored in terms of the electric strength exhibited. It would appear that there was a window in which real advantages accumulated from the nano-formulated material. An optimum filler loading of about 0.5 wt.% was indicated.