• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.541-546
• /
• 2001

Experimental programs were accomplished to improve and evaluate the structural performance of test specimens, such as the hysteretic behavior, the maximum horizontal strength, crack propagation of and ductility etc. Test variables are restraining factors of frame, with or without masonry infilled wall, and masonry method Six reinforced concrete rigid frame and masonry infilled wall were tested and constructed in one-third scale size under vertical and cyclic loads simultaneously. Based on the test results, the following conclusions can be made. For masonry infilled wall with restraining factors of frame, maximum horizontal capacities were increased by 1.91~2.24 times in comparision with that of rigid frame. For masonry infilled wall with restraining factors of frame(IFWB-l~3), cumulated energy dissipation capacities wear increased by 1.35~l.60 times in comparision with that of masonry infilled wall(IFB-1) at final stage of testing.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• 제14권5호
• /
• pp.391-397
• /
• 2002

Pressure drop were experimentally investigated for ice slurry flowing in the acrylic pipes with inner diameter of 24 mm. Ice slurry was made from 6.5% ethylene glycol-water solution, and the pipes is consisted of horizontal, vertical (upward and downward) and $90^{\circ}$ elbow pipe. The ice Packing factor (IPF) and the flow rate of the experiments were varied from 0 to 30% and from 5 to 70kg/min respectively The measured pressure drop in various pipe positions were compared with those for the solution flow (IPF=0). The pressure drop was larder than that for solution flows as the IPF increased when the flow rate was low or very high. Sharp increases in pressure drop were observed for the cases when IPF is more than 70% in horizontal and vertical pipes, whereas the pressure drop increased with the IPF simultaneously in an elbow pipe.

• The Research Journal of the Costume Culture
• /
• 제30권5호
• /
• pp.675-688
• /
• 2022

The purpose of this study is to analyze the body type characteristics of tall adult men aged 20 to 69 years to present base material on body dimensions for men's clothing companies. The research method comprised statistical analysis of 3D measurements after selecting items from the 8th Korean human body size survey related to the torso body types of 495 adult men who were at least 178cm tall. As a result, six factors were extracted, and the total explanatory variable of the entire factor was shown to be 80.499%. As a result of cluster analysis using this as an independent variable, three types were derived: Type 1, "a normal body type with an oval cross-sectional shape" (37.6%), with a larger vertical size and an oval chest cross-sectional shape compared to other types; Type 2: a "cylindrical thick body shape" (31.1%), which is the first stage of BMI obesity, with narrow shoulders and a cylindrical shape with a round cross-section; Type 3, "a body shape with broad shoulders and developed chest parts" (31.3%), with a horizontal size similar to Type 2 above the waist, but similar to Type 1 below. The results of this study are expected to be used as a basis for a clothing dimension system and clothing development for tall men reflecting the characteristics of the torso.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제15권4호
• /
• pp.341-349
• /
• 1991

This study was done to provide basic data for clothing design and thus to contribute to the academic development of the clothing and textile area. The focus of this study was to charac­terize the somatotype based on each individual's lateral view. For this purpose, firstly, categorization of the subjects based on their lateral view and definition of each category, secondly, characterization of each somatotype, and thirdly, sugges­tion of the deterministic criteria of each category were complished. The subjects in this study were female college students of 18 to 26 year-old whose somatotypes were comparatively invariable after cessation of physical growth. The metrical items characterizing upper body lateral view were chosen. Data were collected through Anthropometry and Photometry and analyzed by Factor analysis. The results were as follows; 1. Each subject's side view contour was classified as straight type, lean-back type, bend­forward type, and swayback according to its position to the relative plumb line. Straight type was defined as the type in which the plumb line passes through the lobe of the ear, the shoulder joint, and the mid abdominal region laterally. Lean-back type positioned the plumb line more posteriorly than straight type. Bend-forward type positioned the plumb line more anteriorly than straight type. Swayback positioned the plumb line at about the same line as straight type. And curvature of side view contur was more prominent in this type than in straight type. 2. Seven factors were figured out. The first factor was representing upperbody volume, and the second factor was representing size, the third factor was horizontal distance from lateral view representing size view contour. The fourth factor was front body length, the fifth factor was back body length. The sixth factor was shoulder length and shoulder width representing shoulder shape. The seventh factor was the bust shape.

• The Research Journal of the Costume Culture
• /
• 제29권6호
• /
• pp.881-903
• /
• 2021

This study aimed to analyze adult men's body sizes and shapes and suggest size specifications to provide preliminary data to academia and industries. A total of 814 adult men aged 30-44 were selected from the 7th Size Korea data, and 55 direct upper body measurement and calculation items were analyzed using SPSS 25.0. In individual Individual differences, thickness, circumference, and width were high, and height and length were low. Height above the waist base line and shoulder dimension decreased in early 40s age group, while height below the waist base line declined as age increased. In addition, buttocks shape changes were found in early 40s age group. According to factor analysis, 'upper body and upper-extremity horizontal size', 'torso height and upper extremity length', 'shoulder dimension', 'upper body length' and 'shoulder angle' were derived. Using clustering analysis, four different body types were classified: i) big abdomen with flat chest, ii) slender with big, raised shoulders, iii) dwarfish with small, droopy shoulders, and iv) obese with large shoulders. 'Slender with big, raised shoulders' was a typical body shape among men aged 30-44. In older participants, the 'big abdomen with flat chest' ratio was low, while 'obese with large shoulders' was more common. This study proposed size specifications by body type considering the above characteristics.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제21권3호
• /
• pp.571-580
• /
• 1997

In this study, the trunks of adult females were classified into several kinds of somatotypes and their distribution according to the age groups was shown. The subjects were 343 females of 18 to 49 year-old. The results were as follows: 1. The trunk somatotypes were classified into 5 types. From factor scores and anthropometric values according to each somatotype, it was shown that the somatotype was classified by the relation between the variables of vertical size and those of horizontal size. 2, As the characteristic of the classified somatotype was represented by the scale and its lateral silhouette was suggested, the characteristic of the classified somatotype was Quickly undertook. 3. By suggesting the canonical discriminant function with the unstardardized canonical coefficient, individual trunk somatotype could be discriminated from the measured anthropometric data without modifying the data. 4. From the frequency distribution of the somatotypes in each age group, the dominant somatotype of each age group was shown differently.

• Journal of Technology Innovation
• /
• 제13권3호
• /
• pp.27-49
• /
• 2005

In this Paper, we analyzed the relative importance of multiple sources and their effects on innovative activities. Through factor analysis, we found 5 sources of innovative activities; university/laboratory source, within firm source, general information source, vertical/competitive relation source, and horizontal relation source. Through regression analysis, we found that (1) 'within firm source' is the most important source on innovative activities, (2) from inputs' point of view, the more 'vertical/competitive relation source' is, the less innovative activities we, (3) from outputs' point of view, innovations are more activated when 'university/laboratory source' is abundant. but, they are less activated when 'general information source' and 'vertical/competitive relation source' is abundant, and (4) according to firm size and innovation stages(newproduct innovation, upgraded product innovation, and process innovation), the effect of sources on innovative activities is different.

• Journal of the Korea Fashion and Costume Design Association
• /
• 제21권4호
• /
• pp.165-179
• /
• 2019

This study used 3D body scan data to classify body shapes according to the torso shape of adult males aged 20-75 years. This data will be provided so that the apparel industry can make apparel products corresponding to body characteristics by age. The study used 1,796 adult males between the ages of 20 and 75 and the 3D body shape data of the '5th Research on National Standard Anthropometry'. For data analysis, the program SPSSWIN Ver. 17.0 was used to calculate the mean and frequency allowing for a factor analysis, cluster analysis, analysis of variance, and Duncan test. To classify body shape according to the torso shape of adult males, this study considered nine factors: 'horizontal size of torso,' 'vertical size of body,' 'curve of torso and waist-abdomen flatness ratio,' 'length of torso,' 'shape of neck area,' 'degree of lateral curve,' 'difference between front and back interscye length,' 'shoulder armscye shape,' and 'chest flatness ratio.' Based on the results of the factor analysis, the torso shapes of adult males were classified into five types. Type 1 is "upright body with flat, curvy shape", Type 2 is "curve sway back body type", Type 3 is "flat, abdominally obese body", Type 4 is "obese, crooked body" and Type 5 is "thick sway front body type." named.

• KCI Concrete Journal
• /
• 제12권1호
• /
• pp.57-68
• /
• 2000

The effect of structure size on the nominal strength of unidirectional fiber-polymer composites, failing by propagation of a kink band with fiber microbuckling, is analyzed experimentally and theoretically. Tests of novel geometrically similar carbon-PEEK specimens, with notches slanted so as to lead to a pure kink band (without shear or splitting cracks), are conducted. The specimens are rectangular strips of widths 15.875, 31.75. and 63.5 mm (0.625, 1.25 and 2.5 in and gage lengths 39.7, 79.375 and 158.75 mm (1.563, 3.125 and 6.25 in.). They reveal the existence of a strong (deterministic. non-statistical) size effect. The doubly logarithmic plot of the nominal strength (load divided by size and thickness) versus the characteristic size agrees with the approximate size effect law proposed for quasibrittle failures in 1983 by Bazant This law represents a gradual transition from a horizontal asymptote, representing the case of no size effect (characteristic of plasticity or strength criteria), to an asymptote of slope -1/2 (characteristic of linear elastic fracture mechanics. LEFM) . The size effect law for notched specimens permits easy identification of the fracture energy of the kink bandand the length of the fracture process zone at the front of the band solely from the measurements of maximum loads. Optimum fits of the test results by the size effect law are obtained, and the size effect law parameters are then used to identify the material fracture characteristics, Particularly the fracture energy and the effective length of the fracture process zone. The results suggest that composite size effect must be considered in strengthening existing concrete structural members such as bridge columns and beams using a composite retrofitting technique.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제5권3호
• /
• pp.131-139
• /
• 2001

Experimental programs were accomplished to improve and evaluate the structural performance of RC frame structures with masonry infilled wall, such as the hysteretic behavior, the maximum horizontal strength, crack propagation, and ductility etc. Test variables are restraining factors of frame, with or without masonry infilled wall, and masonry method. Six reinforced concrete rigid frame and masonry infilled wall were tested and constructed in one-third scale size under vertical and cyclic loads simultaneously. Based on the test results, the following conclusions can be made. For masonry infilled wall with restraining factors of frame(IFWB-1~3), cumulated energy dissipation capacities were increased by 1.35~1.60 times in comparision with that of masonry infilled wall(IFB-1) at final stage of testing. For masonry infilled wall with restraining factors of frame, maximum horizontal capacities were increased by 1.91~2.24 times in comparision with that of rigid frame.