• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.254-256
• /
• 1998

• 한국가구학회지
• /
• 제21권6호
• /
• pp.449-458
• /
• 2010

본 연구는 중밀도섬유판(MDF)의보드두께에 따른 수평밀도분포(HDD: horizontal density distribution)를 조사하기 위해 수행하였다. 생산공장에서 제조된 보드두께가 다른 5 종류 즉 2 mm, 4.5 mm, 9 mm, 18 mm 및 30 mm의 원판을 두 가지 다른 시편크기 즉 $500{\times}500\;mm$와 $120{\times}120\;mm$로 제작하여 수평밀도분포를 측정하였다. 전체적으로MDF의 밀도는 보드두께가 증가할수록 감소하는 경향을 보였으며, 가장 얇은 보드두께의 MDF가 가장높은 밀도를 나타내었다. 수평밀도분포의 변이는 작은 크기 즉 $120{\times}120\;mm$의 시편에서 큰 차이를 보여 MDF의 보드두께가 수평밀도분포에 큰 영향을 미치는 것으로 나타났으며 보드두께가 클수록 감소하는 경향을 나타내었다. 또 보드두께가 적을수록 수평밀도분포의 밀도분포는 컸으나 보드두께가 클수록 밀도범위가 좁게 나타났다. 수평밀도분포의 변이계수(COV)는 보드두께가 증가함에 따라 감소하는 경향을 보였다. 요약하면 MDF 보드두께는 수평밀도분포에 매우 큰 영향을 미치며시편의 크기 또한 상당한 영향을 미치는 것으로 나타났다.

• 한국정보통신학회논문지
• /
• 제19권10호
• /
• pp.2269-2274
• /
• 2015

본 논문은 S 형태의 folded 커플링(coupling) 구조를 이용하여 세로 측의 크기를 줄인 λg/4 단락형 협대역 스터브(stub) 대역통과 여파기에 대해 제안을 한다. 제안된 여파기는 스터브의 구현을 위해 스터브의 임피던스 값 변화 없이 스터브의 위치를 변화시켜, 그에 따른 Qe(External Quality Factor) 값을 이용하여 협대역 대역통과 여파기를 구현 한다. 또한 협대역 대역통과 여파기의 전송선로 부분에 S 형태의 커플링(coupling) 구조를 집적시켜, 여파기의 가로 측 크기를 줄이도록 한다. 제안된 여파기의 중심 주파수는 5.8GHz, 대역폭은 3.4 % 이며, 삽입손실 및 반사손실은 각각 1.46 dB 및 16.5 dB의 측정결과를 얻었다.

• 한국의상디자인학회지
• /
• 제22권3호
• /
• pp.99-110
• /
• 2020

In terms of junior high school girls' growth patterns during early adolescence, are unlike childhood when relatively balanced growth patterns are found and high school years in which the normal adult body type is nearly reached, growth patterns displayed are imbalanced and rapid. In fact, diverse size changes by body part growth occur significantly different from individual to individual. Therefore, it has been hard for junior high school students to select their proper size when buying school uniforms. This study attempted to acquire basic data needed to address adolescent body shapes and school uniform patterns for junior high school girls, using the data from the 7th Size Korea Survey (2015). Specifically, it provides basic data for the development of school uniform patterns through the classification of their body into particular types, After extracting body shape components and a cluster analysis using ANOVA. According to a factor analysis conducted to determine body shape components, six factors were obtained: Factor 1: bulk and horizontal size, Factor 2: body height and length, Factor 3: shoulder shape and length, Factor 4: shape of upper body, Factor 5: lower drop, Factor 6: upper drop with a variance of 81.46%. To classify junior high school girls' body shape and determine their characteristics, a cluster analysis was performed with the variables obtained using factor analysis. Body shape was classified into three different types: Type 1 accounted for 30.7%. This was a short, slender body with the smallest bulk, size, and upper drop. Type 2 accounted for 24.9%. This was the largest in bulk and horizontal size and highest and length as well. Type 3 accounted for 44.5%. This type was close to average in terms of horizontal size, length and height, and high drop values. To develop school uniforms with great accuracy and body fit for junior high school students, there should be further studies on changes in body shape and their causes. The study results can serve as basic data for comparing branded school uniform patterns for junior high school girls and developing school uniform patterns based on body shape, using 3D virtual clothing simulations.

• 한국주조공학회지
• /
• 제17권6호
• /
• pp.585-591
• /
• 1997

Hyper-eutectic Al-17.5wt%Si alloy bars of 25 mm in diameter were produced by horizontal continuous casting process. Effect of both casting speed and primary Si refiner (AlCuP) on microstructure and mechanical properties of the alloy have been investigated. With increasing a weight fraction of AlCuP, the average primary Si size decreased down to $20 {\mu}m$. On the contrary, there was no notable changes of microstructure and primary Si size according to the casting speed in the experimental range of this study, indicating that the cooling rate should be increased to optimize and refine microstructure and primary Si size. The experimental results including hardness, tensile strength and wear resistance tests of the processed alloy bars showed a good possibility to develop the high performance wear resistant Al-Si alloy.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.375-384
• /
• 1994

Depending upon the eye and head movement, the visual field is often classified into three categories; stationary field, eye field and head field. To investigate the effect of background condition on the size of stationary field, an experiment was conducted, in which the subject was instructed to search a target with distinct orientations. In each trial, a single target was presented on the rear-view screen projected by the two-field tachistoscope, with the visual angle subtended 4.3.deg. vertically and horizontally. Density, meridian and subject showed a significant effect on stationary field at .alpha.=0.01, where density was inversely proportional to the size of stationary field. The size of the stationary field on horizontal axis was larger than that on vertical axis, and that on right and below meridian also larger than on left and lower meridian. The shape was found to be horizontally oriented oval and statistically asymmetric with respect to horizontal and vertical axes. The regression equation to predict stationary field on the given background condition was suggested. These results were expected to be used as a designing guideline when arranging displays and controls on panels such as automobile display panels, cockpits, etc. In addition, it can be inferred from the results that eye field and head field are also subjected to the influence of background condition.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.151-155
• /
• 2002

In GMA(Gas Metal Arc)Welding, the weld size that is a locally melted area of a workpiece is one of the most important considerations in determining the strength of a welded structure. Variations in the weld power and the welding heat flux may affect the weld pool formation and ultimately the size of the weld. Therefore, an accurate prediction of the weld size requires a precise analysis of the weld thermal cycle. In this study, a model which can estimate the weld bead geometry and a method for thermal analysis, including the model, are suggested. In order to analyze the weld bead geometry, a mathematical model was developed with transformed coordinates to apply to the horizontal fillet joints. A heat flow analysis was performed with a two dimensional finite element model that was adopted for computing the base metal melting zone. The reliability of the proposed model and the thermal analysis was evaluated through experiments, and the results showed that the proposed model was very effective for predicting the weld bead shape and good correspondence in melting zone of the base metal.

• 화약ㆍ발파
• /
• 제36권4호
• /
• pp.9-15
• /
• 2018

발파에 의한 암석의 파쇄도는 적재, 운반과 2차 파쇄로 이어지는 후속공정에 직접적인 영향을 미치므로 파쇄도의 조절은 발파 효율성과 생산비용을 평가하는데 필수적이다. 본 연구에서는 인공절리의 방향에 따른 암석의 파쇄도에 대해 분석하였다. 갱내 암반에 수직 및 수평인공절리를 생성한 후 발파실험을 수행하였다. 생성된 암석파쇄물의 입도분포는 2차원 영상해석 프로그램인 split-desktop으로 평가하였다. 평가결과 수평인공절리가 수직인공절리에 비해 전체적인 암석파쇄물의 크기가 작게 평가되었고, 다양한 크기로 암석파쇄물이 분포하였다. 인공절리의 방향에 따라 대괴발생을 억제하고 암석파쇄물을 일정한 크기 이하로 조절 할 수 있을 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.220-224
• /
• 2005

The technology trend of Flat Panel Display (FPD) equipments have been demanded that there are compact and multi-function. Therefore, nano/micro scale patterned on polymeric materials of Back Light Unit (BLU) in Liquid Crystal Display (LCD) that has been investigated. This paper describes a series of Horizontal Type Micro Tensile Tester that were carried out to investigate the load strain distance performance of typical polymeric material sheets. The polymeric materials film that micro size shaped specimens for tensile test are used by Cold-Isostatic-Press (CIP). Test equipment is Horizontal type Micro Tensile Tester that is presented to measure the micro scale mechanical property of thin film for FPD. This paper presents which easy testing tools measure for micro patterned on polyethylene (PET) specimens.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.626-629
• /
• 1997

In this study, position optimization of insulation rods and suspension rods in discharge electrode frame of electrostatic precipitator(EP) is performed using finite element analysis(FEA). The object of the optimization is to minimize the difference of altitudes in unevenly sagged horizontal structure and to regulate the size of materials within the allowable stress bounds. Uppermost horizontal channel of discharge electrode frame is highly stressed and uniformity of lowest horizontal angle depends on the position of rods. Ten types of frame are analyzed and one recommended model is presented.