• 제목/요약/키워드: hook mechanism

검색결과 19건 처리시간 0.023초

견관절의 삼중 관절와 순 병변 - 증례 보고 - (Triple Labral Lesion of Shoulder - A Case Report -)

  • 최남용;송현석;윤재웅
    • Clinics in Shoulder and Elbow
    • /
    • 제12권1호
    • /
    • pp.80-83
    • /
    • 2009
  • 목적: 삼중 관절와 순 병변(triple labral lesion)은 전방, 후방, 상방 관절와 순의 파열이 동시에 발생한 경우를 말한다. 문헌 보고가 드물어서, 수상 기전과 증상에 대하여 아직 정립되지는 않았다. 대상 및 방법: 본 저자들은, 교통 사고 후 우측 견관절의 동통과 능동적 외전 장애를 보인 39세 남자에서 삼중 관절와 순 병변을 경험하였다. 내원 시에 관절와 상완 관절의 불안정에 대한 증상을 호소하지는 않았다. 흡수성 봉합 나사못과 봉합 갈고리를 사용하여 관절와 순에 대한 봉합술을 시행하였다. 결과: 수술 후 18개월 추시에서, 능동적 운동범위는 정상으로 호전되었으며 일상 생활 중에는 어려움이 없었다.

철근 기계적 정착장치의 설계 고려사항과 인발특성 (Design Considerations and Pull-Out Behavior of Mechanical Anchor of Reinforcement)

  • 천성철;김대영
    • 콘크리트학회논문집
    • /
    • 제13권6호
    • /
    • pp.593-601
    • /
    • 2001
  • 철근콘크리트구조에서 철근의 인장력이 발휘되기 위해서는 적절한 정착길이 또는 갈고리가 필요하다. 그런데, 접합부와 같이 배근이 집중되는 곳이나 대구경 고강도철근이 필요한 경우 정착을 위한 정착길이나 갈고리의 제작 및 배근작업이 어려우며 콘크리트의 충진성도 저하될 수 있다. 또한 갈고리부분의 과도한 응력집중으로 국부적인 지압파괴나 slip이 발생될 우려도 있다. 이러한 문제점을 해결할 수 있는 방안으로 정착판을 철근 단부에 부착한 기계적 정착공법이 제안되고 있다. 본 연구는 기계적 정착공법의 기초가 되는 정착장치의 요구성능과 정착설계법을 고찰하고 인발실험를 통해 정착장치의 앵커기능을 확인하고자 한다 인발실험 결과, 본 연구에서 설계된 정착장치는 앵커로써의 기능을 적절히 발휘하여 기존 CCD 이론식과 매우 근접한 내력을 발휘하였다 철근항복내력 이상의 정착내력을 지니는 경우, 항복하중까지 콘크리트에 아무런 손상이 발생되지 않았으며, 정착판 후미에서 콘크리트와의 상대변위는 0.2mm이하로 콘크리트에 손상을 유발시키지 않을 것으로 판단되었다. 따라서, 본 연구의 설계과정으로 제작된 기계적 정착장치를 통해 콘크리트에 유해한 손상 없이 필요한 정착내력을 확보할 수 있다. 그러나, 철근간 간격이 좁아 파괴면이 중첩되는 경우에는 정착내력이 크게 저하되어, 순수한 콘크리트 내력만으로 기계적 정착설계가 이루어지는 경우 상당한 매립깊이가 요구된다. 따라서, 실제 구조물의 정착설계를 위해서는 인접부재와의 골조거동(frame action)에 따른 구속효과와 전단보강근의 영향을 고려할 필요가 있다. 이에 대한 추가적인 연구가 필요하다.

Transient Anisocoria during Medial Blowout Fracture Surgery

  • Lee, Jae Il;Kang, Seok Joo;Jeon, Seong Pin;Sun, Hook
    • 대한두개안면성형외과학회지
    • /
    • 제17권3호
    • /
    • pp.154-157
    • /
    • 2016
  • Transient anisocoria is rare during blowout fracture reconstruction. We report a case of transient anisocoria occurring during medial blowout fracture reconstruction and review the relevant literature. A 54-year-old woman was struck in the face and was admitted for a medial blowout fracture of the left eye. During the operation, persistent bleeding occurred. To control this bleeding, a 1% lidocaine solution with 1:200,000 epinephrine was applied to the orbital wall with cotton pledgets. In total, 40 mL of local anesthetic was used for the duration of the operation. After approximately three hours of the surgery, the ipsilateral pupil was observed to be dilated, with sluggish response to light. By 3 hours after the operation, the mydriasis had resolved with normal light reflex. In conclusion, neurological and ophthalmologic evaluation must be performed prior to blowout fracture surgery. Preoperative ophthalmic evaluation is simple and essential in ruling out any preexisting neurologic condition. Moreover, surgeons must be aware of the fact that excessive injection of lidocaine with epinephrine for hemostasis during orbital wall surgery can result in intraoperative anisocoria. Anisocoria-related situations must be addressed in a proficient manner through sufficient understanding of the mechanism controlling the pupillary response to various stimuli.

중국 자원식물 보메리아, 칼라마니아, 클로세나의 항노화 항염 복합 건강관리 기능성 연구 (Anti-Oxidant and Anti-Inflammatory Complex Health Functional Analysis of Chinese Resource Plant Boehmeria, Carlemannia and Clausena)

  • 문진;이정민;이제헌;이동현;최서연;정예림;최경아
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2023년도 임시총회 및 춘계학술대회
    • /
    • pp.52-52
    • /
    • 2023
  • Ageing has been known to be deeply related to oxidative activities. Furthermore, inflammation is a response initiated by conditions such as infection and injury. It has been known that complex connections occur between oxidative stress and the inflammatory response, however underlying mechanism needs to be investigated. Chinese resource plants have been widely used as functional food and medicine for a long time, however it is not studied well how many of these resource plants work. We first decided testing anti-oxidant and anti-inflammatory activities with 95% ethanol extracts of the chinese resource plants, Boehmeria pilosinscula (Blume) Hassk., Carlemannia tetragona Hook f. and Clausena emarginata C.C.Huang. To measure anti-oxidant activity, we performed DPPH assay in Raw264.7 cells with 95% ethanol extracts. Clausena extracts showed significantly higher anti-oxidant activity than those of Boehmeria and Carlemannia. We then performed Nitric Oxide assay to measure the inflammation suppression levels with 95% ethanol extracts of these plants. Clausena extracts showed significantly higher suppression of nitric oxide production than those of Boehmeria and Carlemannia. This indicates that inflammation levels are significantly reduced by Clausena. After measuring anti-oxidant and anti-inflammatory activities, we then performed MTT assay to measure the cell survival rate of Raw264.7 cells treated with these extracts. Boehmeria showed much more cell survival rate than Carlemannia and Clausena. Taken together, this result suggests that Clausena extracts have more anti-oxidant and antiinflammatory activities than Boehmeria and Carlemannia, while Boehmeria extracts have more cell survival rate than Carlemannia and Clausena.

  • PDF

굴곡과 신전 수동운동 상태에서 개별경추의 진자운동 및 병진운동의 운동학적인 특징 (Kinematical Characteristics of the Translational and Pendular Movements of each Cervical Vertebra at the Flexion and Extension Motion)

  • 박성혁;최한성;홍훈표;고영관
    • Journal of Trauma and Injury
    • /
    • 제19권2호
    • /
    • pp.126-134
    • /
    • 2006
  • Purpose: The aim of this study was to determine the kinematical characteristics of the pendular and the translational movements of each cervical vertebra at flexion and extension for understanding the mechanism of injury to the cervical spine. Methods: Twenty volunteers, young men (24~37 years), with clinically and radiographically normal cervical spines were studied. We induced two directional passive movements and then took X-ray pictures. The range of pendular movement could be measured by measuring the variation of the distance between the center point of two contiguous cervical vertebrae, and the range of translational movement could be measured by measuring the variation of the shortest distance between the center point of a vertebra and an imaginary line connecting the center points of two lower contiguous cervical vertebrae. The measurements were done by using a picture archiving and communicating system (PACS). Results: The total length of all cervical vertebrae in the neutral position was, on average, 133.66 mm, but in both flexion and extension, the lengths were widened to 134.83 mm and 134.79 mm, respectively. The directions of both the pendular and the translational movements changed at the $2^{nd}$ cervical vertebra, and the ranges of both movements were significantly larger from the $5^{th}$ cervical vertebra to the $7^{th}$ cervical vertebra for flexion and combined flexion and extension motion (p<0.05). Conclusion: The kinematical characteristics for flexion and extension motions were variable at each level of cervical vertebrae. The $1^{st}$ and the $2^{nd}$ cervical vertebrae and from the $5^{th}$ to the $7^{th}$ cervical vertebrae were the main areas of cervical spinal injury. This shows, according to "Hook's law," that the tissues supporting this area could be weak, and that this area is sensitive to injury.

기선권현 강의 연구 -IV (Study on the Anchovy Boat Seine-IV An Experiment to Mechanize the Hauling Operation of Bag Net)

  • 이병기
    • 수산해양기술연구
    • /
    • 제15권2호
    • /
    • pp.95-100
    • /
    • 1979
  • 권현망에서는 어획물을 손상시키지 않도록 양망해야 하는데, 재래식에서는 순전히 인력으로서 양망하므로 30-34명이나 되는 인원이 필요하다. 이것을 성력화하기 위하여, 자루그물의 옆판쪽에 속으로 반달코가 있는 힘줄을 6가닥씩 넣고, 배에는 선미에 데릭부움을 설치하여, 거기에 장치된 블록줄끝의 훅을 반달코에 걸어서 사이드 드럼으로 감아 재래식처럼 자루그물을 까뒤집으면서 양망한 바, (1) 어획물이 손상되지 않고, (2) 사이드 드럼의 권양장력은 30명의 선원의 그것보다 크며, (3) 본래식의 반이하인 14명의 선원으로서 조업이 가능하고, (4) 자루그물의 양망 소요시간은 어획량이 많을수록 재래식보다 적게 소요된다는 사실이 규명되었다.

  • PDF

남극, 킹조지섬, 세종과학기지 연안에 우점하는 남극암치아속 어류 두 종의 길이와 무게의 관계 (Length and Weight Relationship for Two Dominant Antarctic Notothenioid Fishes Caught in the Coastal Water off King Sejong Station, King George Island, Antarctica)

  • 박현;김일찬;강승현;김보미;한동원;김진형
    • 한국어류학회지
    • /
    • 제29권2호
    • /
    • pp.146-150
    • /
    • 2017
  • 남극 연안에 우점하는 남극암치아목과, 암치아목속 어류 두 종 (Notothenia coriiceps와 Notothenia rossii)의 전장과 무게의 관계를 조사하였다. 어류는 2017년 1월에 남극 킹조지섬에 위치한 세종과학기지 연안에서 낚시로 채집되었다. 총 30마리가 채집된 N. coriiceps의 평균 전장은 266.0 mm였고, 7마리가 채집된 N. rossii의 평균전장은 275.4 mm이었다. 평균 무게의 경우 N. coriiceps는 283.1 g이었고, N. rossii는 290 g이었다. 전장과 무게의 관계를 조사한 결과, 두 종 모두 양의 상대성장 값(b>3)을 보였다. 본 조사에서 얻은 남극 연안에 우점하는 두 종의 크기 자료는 남극 해양생물의 환경적응 기작과 생물학적 대사과정을 이해하기 위한 관련 생리 연구를 수행하는데 있어서, 좋은 기초자료로 활용될 수 있을 것으로 기대된다.

얼굴의 수직성장을 이용하여 III급 부정교합을 치료하는 구강내 가철식 장치의 치료기간분석 (Analysis of Treatment Period on the Intraoral Removable Appliance Utilizing Vertical Facial Growth on Class III Malocclusion)

  • 송지혜;김성오;송제선;이제호;최형준
    • 대한소아치과학회지
    • /
    • 제46권2호
    • /
    • pp.173-182
    • /
    • 2019
  • 본 연구의 목적은 혼합치열기 초기에 III급 부정교합을 보이는 어린이에서 수직성장을 유도하는 III급 고무줄을 걸 수있도록 고안된 구강내 가철식장치를 사용하여 반대교합을 치료시, 그 구체적인 치료기간을 알아보고, 이에 영향을 주는 변수를 확인하는 것이다. 본 소아치과에 III급 부정교합을 주소로 내원하여 구강내 가철식 장치로 치료를 완료한 56명의 환자를 대상으로 치료개시 연령, 치료기간 및 치료유형, 수평피개량, 수직피개량 등의 자료를 수집하였다. 환자군의 교정개시 연령은 8.75세이었고, 교합이 넘어갈때까지 3.31개월, 이후 정상 피개까지 1.90개월이 소요되어, 대부분이 개시 6개월 이내에 개선되었다. 전체 치료기간은 21.79개월이었고 환자의 협조도(p = 0.000)와 고정식 교정장치의 여부(p = 0.032)가 치료기간에 유의하게 영향을 주었다. 결론적으로 본 연구의 가철식장치는 수년간 장시간 장착하며 악정형력을 주는 구강외 장치에 비해서 그 치료기간이 6개월 이내로 짧으며, 혼합치열기 III급 부정교합 어린이에서 효과적으로 이용할 수 있다.

조선 전기 자동물시계의 주전(籌箭) 연구 (A STUDY ON THE JUJEON OF AUTOMATIC CLEPSYDRA IN EARLY JOSEON DYNASTY)

  • 윤용현;김상혁;민병희;오경택
    • 천문학논총
    • /
    • 제36권3호
    • /
    • pp.65-78
    • /
    • 2021
  • Jagyeokru, an automatic striking water clock described in the Sejong Sillok (Veritable Records of King Sejong) is essentially composed of a water quantity control device and a time-signal device, with the former controlling the amount or the flow rate of water and the latter automatically informing the time based on the former. What connects these two parts is a signal generating device or a power transmission device called the 'Jujeon' system, which includes a copper rod on the float and ball-racked scheduled plates. The copper products excavated under Gongpyeong-dong in Seoul include a lot of broken plate pieces and cylinder-like devices. If some plate pieces are put together, a large square plate with circular holes located in a zigzag can be completed, and at the upper right of it is carved 'the first scheduled plate (一箭).' Cylinder-like devices generally 3.8 cm in diameter are able to release a ball, and have a ginkgo leaf-like screen fixed on the inner axis and a bird-shaped hook of which the leg fixes another axis and the beak attaches to the leaf side. The lateral view of this cylinder-like device appears like a trapezoid and mounts an iron ball. The function of releasing a ball agrees with the description of Borugak Pavilion, where Jagyeokru was installed, written by Kim Don (1385 ~ 1440). The other accounts of Borugak Pavilion's and Heumgyeonggak Pavilion's water clocks describe these copper plates and ball releasing devices as the 'Jujeon' system. According to the description of Borugak Pavilion, a square wooden column has copper plates on the left and right sides the same height as the column, and the left copper plate has 12 drilled holes to keep the time of a 12 double-hours. Meanwhile, the right plate has 25 holes which represent seasonal night 5-hours (Kyeong) and their 5-subhours (Jeom), not 12 hours. There are 11 scheduled plates for seasonal night 5-hours made with copper, which are made to be attached or detached as the season. In accordance with Nujutongui (manual for the operation of the yardstick for the clepsydra), the first scheduled plate for the night is used from the winter solstice (冬至) to 2 days after Daehan (大寒), and from 4 days before Soseol (小雪) to a day before the winter solstice. Besides the first scheduled plate, we confirm discovering a third scheduled plate and a sixth scheduled plate among the excavated copper materials based on the spacing between holes. On the other hand, the width of the scheduled plate is different for these artifacts, measured as 144 mm compared to the description of the Borugak Pavilion, which is recorded as 51 mm. From this perspective, they may be the scheduled plates for the Heumgyeonggak Ongru made in 1438 (or 1554) or for the new Fortress Pavilion installed in Changdeokgung palace completed in 1536 (the 31st year of the reign of King Jungjong) in the early Joseon dynasty. This study presents the concept of the scheduled plates described in the literature, including their new operating mechanism. In addition, a detailed model of 11 scheduled plates is designed from the records and on the excavated relics. It is expected that this study will aid in efforts to restore and reconstruct the automatic water clocks of the early Joseon dynasty.