• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.196-201
• /
• 2012

Electrospinning is a versatile process used to prepare micro or nano sized fibers from various materials dissolved in volatile solvents. This study reports electrospun pullulan fibrous webs fabricated through electrospinning using water as a solvent. The electrospinning conditions such as pullulan (PUL) concentration and applied voltage were optimized in order to obtain smooth electrospun fibers. The concentration of PUL greatly influenced the viscosity and surface tension of PUL solution. PUL beaded electrospun fibers were obtained from PUL solutions with concentrations lower than 5 wt%, while homogenous electrospun fibers were prepared from solutions with high concentration and high viscosity. The average diameters of PUL fibers were decreased to 200 nm when the polymer concentration was kept at 10 wt% and the applied voltage was fixed at 15 kV during electrospinning. PUL electrospun fiber exhibited higher solubility, flexibility, softness and adhesive strength.

• YAKHAK HOEJI
• /
• v.43 no.5
• /
• pp.642-651
• /
• 1999

Nonsedating antihistamines do net cause sedation in therapeutic doses because these drugs hardly cross the blood-brain barrier. Since most of the peripheral side dffects of conventional antihistamines are related to their muscarinic receptor blocking action, the present study was performed to investigate whether nonsedating antihistamines interact with the muscarinic receptors and discriminate the muscarinic receptor subtypes in the rat cerebral microsomal fraction which containes both $M_1,{\;}M_2,{\;}M_3{\;}and{\;}M_4$ receptors. Five nonsedating antihistamines at high concentrations inhibited [$^3H$]QNB binding to the muscarinic receptor in a dose-dependent manner. The inhibition curves of these drugs except loratadine which showed positive cooperativity (nH=1.55) were steep (nH=1), indicating interaction with a single homogenous population of the binding sites. Astemizole, clemizole and mequitazine increased the $K_D$ value for [$^3H$]QNB without affecting the binding site concentrations, and this increase in the $K_D$ value resulted from the ability of these drugs to slow [$^3H$]QNB-receptor association. The Ki values of astemizole, clemizole and mequitazine for the inhibition for the inhibition of [$^3H$]QNB binding to muscarinic receptor were 0.58, 5.99 and $0.007{\;}{\mu}M$, respectively. However, loratadine and terfenadine inhibited noncompetitively [$^3H$]QNB binding with the normalized $IC_50$ value of about $2{\;}{\mu}M$. These results demonstrate that; 1) astemizole, clemizole and mequitazine interact directly with the muscarinic receptor at high concentrations; 2) muscarinic receptor blocking potency of these drugs varies widely among drugs; 3) these drugs do not discriminate between muscarinic receptor subtypes.

• YAKHAK HOEJI
• /
• v.47 no.6
• /
• pp.410-416
• /
• 2003

Autotaxin(ATX) was originally purified from conditioned media of A2058 human melanoma cells and shown to be a potent cell motility-stimulating factor, possessing a type II nucleotide pyrophosphatase/phosphodiesterase (NPP2) activity. Recombinant ATX has recently demonstrated that human plasma lysophosholipase D is identical to ATX and uses lysophosphatidylcholine as a substrate to mediate various biological functions including tumor cell growth and motility through G-protein coupled receptor. However, despite pivotal roles of ATX on physiological or pathophysiological states, the production of ATX is solely depends on complicated purification method which employs multiple column steps, but resulted in very poor yield. This limited the use of ATX for extensive analysis. We, therefore, expressed six histidine-tagged recombinant human ATX(His-ATX) in High Five TM insect cells to improve the generation of ATX and to make simple the purification of ATX. The signal sequence of the human ATX gene was truncated and replaced with sequence of insect cell secretion signal within expression vector. In addition, codons for six histidines were added to the C-termini of 120kDa ATX cDNA construct. A simple purification scheme utilizing two-step affinity column chromatography was designed to purify His-ATX to homogeneity from the culture supernatant of transfected insect cells. Homogenous His-ATX was detected and isolated from the concentrated insect cell medium using concanavalin A agarose and nickel affinity chromatography. Purified His-ATX was in full length with ATX capacity. A combination of this expression system and purification scheme would be useful for production and purification of high-quality functional ATX for research and practical application of multiple functional motogen, ATX/NPP-2.

• Korean Journal of Materials Research
• /
• v.25 no.8
• /
• pp.386-390
• /
• 2015

Fe-base superalloy powders with $Y_2O_3$ dispersion were prepared by high energy ball milling, followed by spark plasma sintering for consolidation. High-purity elemental powders with different Fe powder sizes of 24 and 50 mm were used for the preparation of $Fe-20Cr-4.5Al-0.5Ti-O.5Y_2O_3$ powder mixtures (wt%). The milling process of the powders was carried out in a horizontal rotary ball mill using a stainless steel vial and balls. The milling times of 1 to 5 h by constant operation (350 rpm, ball-to-powder ratio of 30:1 in weight) or cycle operation (1300 rpm for 4 min and 900 rpm for 1 min, 15:1) were applied. Microstructural observation revealed that the crystalline size of Fe decreased with an increase in milling time by cyclic operation and was about 15 nm after 3 h, forming a FeCr alloy phase. The cyclic operation had an advantage over constant milling in that a smaller-agglomerated structure was obtained. The milled powders were sintered at $1100^{\circ}C$ for 30 min in vacuum. With an increase in milling time, the sintered specimen showed a more homogeneous microstructure. In addition, a homogenous distribution of Y-compound particles in the grain boundary was confirmed by EDX analysis.

• Journal of Embryo Transfer
• /
• v.22 no.4
• /
• pp.229-234
• /
• 2007

This study was undertaken to determine the normal appearance of the postpartum uterine involution. Postpartum changes in uterine shape, architecture, echogenicity and diameter were monitored with ultrasonography in 8 Miniature Schnauzer dogs. Vaginal discharge was observed visually during the 3 weeks of postpartum. A large amount of viscous dark green discharge changed progressively to a small amount of transparent discharge. In the uterine shape, the transverse images were crescent or polygonal at the beginning, but became circular after 16 days. At postpartum day 24, the longitudinal images of placental and interplacental sites were similar to each other The echogenicity of uterine structure was clearly distinguishable among the hyperechoic serous membrane, hypochoic myometrium, hyperechoic endometrium, and anechoic uterine contents during the first week postpartum, but afterward the interluminal boundaries and echogenicity became obscure gradually. In addition, the anechoic substance of the endometrial cavity was not observed after postpartum day 28. In the uterine diameter, the diameter of placental sites decreased markedly from 24 mm at the first day postpartum to 13 mm at day 7, and the diameter of interplacental sites decreased from 15 mm at postpartum day 1 to 10 mm at day 7. At postpartum day 65, the uterus (6.4 mm) changed little and had a uniform homogenous echo, and thus it was confirmed that uterine involution was completed at that time in Miniature Schnauzer dogs.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.32-38
• /
• 2006

Currently, due to the serious world-wide air pollution by substances emitted from vehicles, emission control is enforced more firmly and it is expected that the regulation requirements for emission will become more severe. A new concept combustion technology that can reduce the NOx and PM in relation to combustion is urgently required. Due to such social requirement, technologically advanced countries are making efforts to develop an environment-friendly vehicle engine at the nation-wide level in order to respond to the reinforced emission control. As a core combustion technology among new combustion technologies for the next generation engine, the homogenous charge compression ignition(HCCI) is expanding its application range by adopting multiple combustion mode, catalyst, direct fuel injection and partially premixed combustion. This study used a 2-staged injection method in order to apply the HCCI combustion method without significantly altering engine specifications in the aspect of multiple combustion mode and practicality by referring to the results of studies on the HCCI engine. In addition, this study confirmed the possibility of securing optimum fuel economy emission reduction in the IMEP 8bar range(which could not be achieved with existing partially premixed combustion) through forced charging, exhaust gas recirculation(EGR), compression ratio change and application of DOC catalyst.

• International Journal of Automotive Technology
• /
• v.8 no.2
• /
• pp.137-147
• /
• 2007

Homogenous Charge Compression Ignition (HCCI) combustion systems can be broadly divided for the process applied to 4-stroke and 2-stroke engines. The former process is often referred to as simply HCCI combustion and the latter process as Active Thermo-Atmosphere Combustion (ATAC). The region of stable engine operation tends to differ greatly between the two processes. In this study, it was shown that the HCCI combustion process of a 4-stroke engine, characterized by the occurrence of autoignition under a high compression ratio, a lean mixture and wide open throttle operation, could be simulated by operating a 2-stroke engine at a higher compression ratio. On that basis, a comparison was made of the combustion characteristics of high-compression-ratio HCCI combustion and ATAC, characterized as autoignited combustion in the presence of a large quantity of residual gas at a low compression ratio and part throttle. The results showed that one major difference between these two combustion processes was their different degrees of susceptibility to the occurrence of cool flame reactions. Compared with high-compression-ratio HCCI combustion, the ignition timing of ATAC tended not to change in relation to different fuel octane numbers. Furthermore, when internal EGR was applied to high-compression-ratio HCCI combustion, it resulted in combustion characteristics resembling ATAC. Specifically, as the internal EGR rate was increased, the ignition timing showed less change in relation to changes in the octane number and the region of stable engine operation also approached that of ATAC.

• Journal of Veterinary Clinics
• /
• v.25 no.6
• /
• pp.494-500
• /
• 2008

The aim of this study was to determine the effectiveness of hyaluronic acid-carboxymethylcellulose membrane (GUARDIX-$MB^{(R)}$) barriers on prevention against post-operative peritoneal adhesions. In this study, fourteen mongrel dogs were divided into two experimental groups: 0.1 % hyaluronic acid (0.1HA) group and hyaluronic acidcarboxymethylcellulose membrane (HA-CMC) group. In order to induce adhesions, the anti-mesenteric serosa of the ileum was exteriorized and then abraded in a standard manner by scraping with a scalpel blade to create homogenous petechial hemorrhagic surface over a $1\;{\times}\;1cm$ area. Solution of 0.1HA were simply coated over the abraded tissues, $1.5\;{\times}\;1.5cm$ HA-CMC membrane was placed over the abraded tissues, allowed to spread across the intra-abdominal organs before closure of the abdomen. On day 1 before and day 1, 4, 7, 14, and 21 after operation, venous blood specimens were collected for measurement of fibrinogen and total WBC. The adhesions were blindly assessed 3 weeks later by using a computerized tensiometer. The fibrinogen and total WBC values of two groups showed no statistical significances. The mean tensile strength (gram force, gf) of formed adhesions day 21 after surgery was $88.1\;{\pm}\;55.70gf$ in the 0.1 % HA group and $24.8\;{\pm}\;22.69gf$ in the HA-CMC group. The tensile strength values of adhesion separation HA-CMC membrane group was significantly lower than the 0.1HA group (p<0.05). Therefore, we suggest that HACMC membrane reduce peritoneal adhesions may be applicable to preventing post-operative intraperitoneal adhesions in dogs.

• Korean Journal of Food Science and Technology
• /
• v.16 no.3
• /
• pp.279-284
• /
• 1984

Microstructure of milk powder and cheese made from milk powder were observed by electron microscope. Freeze dried milk powder showed apple-like appearance. The cheese made from freeze dried milk powder had relatively flat surface and homogenous deposit in compare with classical processed cheese. Imported milk powder also indicated similar surface as well as freeze dried milk powder, however, the cheese made from imported milk powder had somewhat coarse surface structures with the spaces between casein matrix and deposit. Commericial milk powder showed irregular shape in size and coagulum which were possibly denatured in the course of drying. The cheese made from commercial powder indicted irregular and small deposit and porous structure. The porousity of the cheese seemed to be influenced by the degree of heat treatment. Denatured protein would be less dispersive than native in presence of polyphosphates. Fat globule and protein micelle of cheese made from skim milk powder get very adjacent to each other and showed compactness of micelles. It is thought that melting mechanism of skim milk powder was different from the melting of typical processed cheese.

• Journal of Yeungnam Medical Science
• /
• v.35 no.1
• /
• pp.114-120
• /
• 2018

Tracheal tumors are rare and difficult to diagnose. Moreover, delays in diagnosis are very common because the symptoms are nonspecific. As a result, tracheal tumors are commonly mistreated as chronic obstructive pulmonary disease or bronchial asthma. We report a case of a 49-year-old male who presented with a 3-month history of dyspnea and cough. Chest computed tomography scan showed a $1.5{\times}1.3cm$ homogenous tumor originating from the right lateral wall of the tracheobronchial angle into the tracheal lumen as well as a $0.5{\times}0.4cm$ round nodular lesion at the right upper lobe with multiple mediastinal lymph nodes enlargement. Bronchoscopic findings revealed a broad-based, polypoid lesion nearly obstructing the airway of the right main bronchus. The patient was diagnosed with pleomorphic adenoma which is the most common benign tumor of the salivary glands, but rarely appears in the trachea. Upon surgery, tracheal pleomorphic adenoma and co-existing active pulmonary tuberculoma that had been mistreated as bronchial asthma over 3 months was revealed. Following surgery, the patient underwent anti-tuberculosis treatment. No recurrence has been detected in the 3 years since treatment and the patient is now asymptomatic.