• Composites Research
• /
• 제24권4호
• /
• pp.41-47
• /
• 2011

본 연구는 사출 성형 공정을 통하여 제작되는 단섬유강화 플라스틱 복합재료의 구조해석 기법에 관한 내용으로 소재의 이방성 기계물성을 예측하고 이를 구조해석에 적용하도록 하였다. 사출 성형 공정을 통하여 제작되는 단섬유강화 플라스틱 복합재료의 구조해석에 있어서 기존의 경우는 일반적으로 소재의 기계적 물성을 균질 등방성 탄성 모델로 이용하여 왔으나, 실제 부품 파손 모드와 크게 상이한 경우가 많다. 이러한 점을 극복하고자 사출 성형 g,름 해석, 일방향성 복합재료의 Halpin-Tsai 식과 배향 평균 모델을 도입하여 단섬유강화 플라스틱 복합재료의 섬유배향 효과가 고려되도록 새로운 구조해석 시스템을 개발하였다. 해석의 정확도는 시편시험 결과와의 비교를 통하여 검증하였으며, 섬유 배향 및 웰드라인 영향 및 섬유 함량에 따른 변화가 해석에 장 반영됨을 확인하였다. 또한 자동차 부품에 개발된 해석 시스템을 적용하여 균질 등방 모델과 달리 부품의 위치별로 다른 기계적 성능이 반영되고, 사출 게이트 위치에 따라 유리섬유 배향이 변화하여 부품의 성능이 달라짐을 확인하였다.

• Applied Microscopy
• /
• 제24권1호
• /
• pp.86-101
• /
• 1994

The development of synovial membrane from knee joint was studied by electron microscope in human fetuses ranging from 20mm to 260mm crown rump length (40days to 30weeks of gestational age). At 40mm fetus, developing synovial tissue was observed in homogenous interzone as a vascular mesenchyme around the periphery. The primitive joint space was appeared after the intermediate layer of the interzone in direct contact with chondrogenic layer at 60mm fetus. Differentiation of the synovial membrane coincided with clarification of the joint cauity. When dilatation of the synovial cavity occurred, the two types of synovial cells were well endowed with rough endoplasmic reticulum. At 100mm fetus, type A cells with a markedly attenuated cytoplasm were found as well as those cells which contained pinocytotic vesicles and vacuoles. By 150-200mm fetuses a majority of the intimal cells were type B. These cells were characterized by abundant rough endoplasmic reticulum and well developed Golgi complex. In contrast, A-type cell had numerous filopodia, pinocytotic vesicles lysosomes, and large vacuoles containing amorphous material. At 260mm fetus, the intimal cells were well developed and plentiful. The most marked difference between the synovial membrane of full-term fetus and adult was the large amount of collagen in the latter. During fetal period, the B-cells were most numerous cell type in the intimal cells. The B-cells were clearly distinguishable from the A-cells by their content of extensive rough endoplasmic reticulum and well developed Golgi complex.

• 한국수정란이식학회지
• /
• 제30권4호
• /
• pp.327-333
• /
• 2015

The objectives of the present study were to select an effective basic medium including its hormone and protein supplementation for IVM of oocytes of indigenous zebu cows. The ovaries of cows were collected from slaughter house and the follicular fluid was aspirated from 2 to 8 mm diameter follicles. The COCs with more than 3 cumulus cell layers and homogenous cytoplasm were selected for maturation. The oocytes were matured in media for 24 hrs at $39^{\circ}C$ with 5% $CO_2$ in humidified air. The maturation of oocytes was evaluated by examining the presence of first polar body under microscope. An efficient basic medium was determined after culturing COCs in either TCM 199 or SOF medium in Experiment 1. An efficient hormone supplementation was determined after culturing COCs in either FSH or gonadotrophin supplemented TCM 199 in Experiment 2. An efficient protein supplementation was determined after culturing COCs in either FBS or Oestrous cow serum (OCS) supplemented TCM 199 in Experiment 3. The oocyte recovery rate per ovary was 3.35. The overall rate of IVM was 74.6%. The maturation rate was $75.5{\pm}3.9$ and $62.2{\pm}20.2%$ in TCM and SOF medium, respectively (P>0.05). The maturation rate of oocytes was significantly higher ($76.6{\pm}13.2%$) in FSH supplemented medium than gonadotrphin supplemented counterpart ($69.7{\pm}10.8%$) (P<0.05). The maturation rates of oocytes were $81.7{\pm}12.9$ and $85.7{\pm}12.7%$ in medium supplemented with FBS and OCS, respectively (P>0.05). In conclusions, both TCM 199 and SOF supplemented with either FBS or OCS, and FSH may be used as medium for IVM of indigenous zebu oocytes in Bangladesh.

• 한국축산식품학회지
• /
• 제38권5호
• /
• pp.866-877
• /
• 2018

Cheese emulsion is an intermediate product for the production of cheese powder and needs to be stable, homogeneous and pumpable characteristics to convey to the spray drier. This study was conducted to evaluate the effects of fat reduction and emulsifying salt (ES) amount in cheese emulsion systems on the physicochemical characteristics. Reduced-fat (RF) and full-fat (FF) white-brined cheese emulsions were produced with different dry matters (DM; 15%-25% excluding ES) and ES concentrations (0%-3% based on cheese weight). Stable cheese emulsion was obtained at lower DM in RF cheese emulsion than that of FF cheese emulsion. Reduction in the amount of ES resulted in instability of both emulsions. Apparent viscosity with pseudoplastic flow behavior significantly increased with the decrease of fat content in stable cheese emulsions. Microstructure of emulsions appeared to be related to the fat content, stability and degree of emulsification. Reduction of fat content caused to get less lightness and more greenness in color, whereas yellowness was significantly decreased by increase in the amount of ES. In conclusion, fat reduction resulted in higher viscosities of cheese emulsion due to inducing the increment of protein, and the addition amount of ES considered as very important factor to produce stable cheese emulsion without protein precipitation or cream separation. Therefore, for preparation of RF cheese emulsion using a variety of white-brined cheese, lower amounts of DM would be suggested in this study to obtain homogenous droplets in the atomizing process of spray drying.

• 터널과지하공간
• /
• 제14권2호
• /
• pp.142-153
• /
• 2004

지층지형에 의한 암반 불균질성이 3차원 응력장에 미치는 영향을 고찰하기 위해서, 등방 직육면체모델, 평탄한 지층을 가진 직육면체모델, 오목한 지층을 가진 직육면체모델에 대해서 3차원 유한요소해석을 수행하였다. 해석결과로부터, 지반 내에 존재하는 지층의 형상은 암반 내 광역응력장에 큰 영향을 미치고 있음을 명확히 하였다. 현장계측결과로부터 광역응력장을 역해석하는 광역응력장 평가법에 지표면을 가진 균질모델과 지표면과 지층지형을 가진 불균질 모텔을 적용하고, 지층지형에 의한 암반 불균질성이 현장계측결과에 미치는 영향을 고찰하였다. 추가로, 지층지형 모텔을 고려한 광역응력장 평가법의 타당성에 대해서 검토하였다.

• 한국재료학회지
• /
• 제21권3호
• /
• pp.180-185
• /
• 2011

This study is aimed to increase the activity of cathodic catalysts for PEMFCs(Polymer Electrolyte Membrane Fuel Cells). we investigated the temperature effect of 20wt% Pt/C catalysts at five different temperatures. The catalysts were synthesized by using chemical reduction method. Before adding the formaldehyde as reducing agent, process was undergone for 2 hours at the room temperature (RT), $40^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$ and $100^{\circ}C$, respectively. The performances of synthesize catalysts are compared. The electrochemical oxygen reduction reaction (ORR) was studied on 20wt% Pt/C catalysts by using a glassy carbon electrode through cyclic voltammetric curves (CV) in a 1M H2SO4 solution. The ORR specific activities of 20wt% Pt/C catalysts increased to give a relative ORR catalytic activity ordering of $80^{\circ}C$ > $100^{\circ}C$ > $60^{\circ}C$ > $40^{\circ}C$ > RT. Electrochemical active surface area (EAS) was calculated with cyclic voltammetry analysis. Prepared Pt/C (at $80^{\circ}C$, $100^{\circ}C$) catalysts has higher ESA than other catalysts. Physical characterization was made by using X-ray diffraction (XRD) and transmission electron microscope (TEM). The TEM images of the carbon supported platinum electrocatalysts ($80^{\circ}C$, $100^{\circ}C$) showed homogenous particle distribution with particle size of about 2~3.5 nm. We found that a higher reaction temperature resulted in more uniform particle distribution than lower reaction temperature and then the XRD results showed that the crystalline structure of the synthesized catalysts are seen FCC structure.

• 한국재료학회지
• /
• 제20권4호
• /
• pp.228-234
• /
• 2010

In this paper, Fe-$TiO_2$ and Fe-fullerene/$TiO_2$ composite photocatalysts were prepared with titanium (IV) n-butoxide (TNB) by a sol-gel method. $TiO_2$, Fe-$TiO_2$ and Fe-fullerene/$TiO_2$ were characterized by scanning electron microscopy (SEM), Transmission electron microscope (TEM), specific surface area (BET), X-ray diffraction analysis (XRD) and energy dispersive X-ray spectroscopy (EDX). The photocatalytic activities were evaluated by the photocatalytic oxidation of methylene blue (MB) solution. XRD patterns of the composites showed that the photocatalyst composite contained a typical single and clear anatase phase. The surface properties shown by SEM presented a characterization of the texture on Fe-fullerene/$TiO_2$ composites and showed a homogenous composition in the particles for the titanium sources used. The EDX spectra for the elemental identification showed the presence of O, C and Ti elements. Moreover, peaks of the Fe element were observed in the Fe-$TiO_2$ and Fe-fullerene/$TiO_2$ composites. The degradation of MB solution by UV-light irradiation in the presence of photocatalyst compounds was investigated in complete darkness. The degradation of MB concentration in aqueous solution occurred via three kinds of physical phenomena: quantum efficiency of the fullerene; organo-metallic reaction of the Fe compound; and decomposition of $TiO_2$. The degradation rate of the methylene blue solution increased when using Fe-fullerene/$TiO_2$ compounds.

• 멤브레인
• /
• 제17권3호
• /
• pp.233-243
• /
• 2007

본 연구에서는 충전용 이차전지의 분리막으로 쓰이는 다공성 막을 기존의 분리막 재료보다 뛰어난 물성을 나타내는 PVdF(poly(vinylidene fluoride))를 사용하여 상전이 방법으로 제조하였다. 용매인 DMF(N,N-dimethylformamide)에 PVdF를 단일상으로 녹인 후 깨끗한 유리판에 캐스팅하여 막을 얻었다. 얻어진 분리막에서 가장 높은 공극률은 78.6%로 얻어졌다. UTM(universal testing machine)을 이용하여 측정된 분리막의 인장강도는 PVdF 20 wt%에서 5.16 MPa의 값을 나타내었다. 시차주사현미경(scanning electron microscopy, SEM)을 이용하여 분리막의 단면 관찰을 통해 다공성을 확인하였다.

• Journal of Chest Surgery
• /
• 제44권4호
• /
• pp.279-284
• /
• 2011

Background: The aim of this study is to investigate the clinical characteristics and management of intrathoracic bronchogenic cysts. Materials and Methods: Twenty-four (n=24) patients with intrathoracic bronchogenic cysts were treated surgically between August 1990 and December 2009 at our institution. Patients were divided into two groups by bronchogenic cyst location: mediastinal or intrapulmonary. Symptoms at diagnosis, radiologic findings, locations, surgical methods, pathological findings, and surgical outcomes were investigated retrospectively from consecutive patient medical records. Results: There were 12 females (50.0%). The mean age was 26.8 (range, 5 to 64) years. The mean follow-up period was 27.3 (range, 1 to 121) months. There were 15 (62.5%) mediastinal and 9 (37.5%) intrapulmonary bronchogenic cysts. Symptoms occurred in 8 patients with mediastinal bronchogenic cysts (53.3%) and 5 patients with intrapulmonary bronchogenic cysts (55.6%) (p=1.000). On computed tomography (CT), 7 patients (46.7%) showed homogenous solid masses in mediastinal bronchogenic cysts and five (55.6%) patients exhibited heterogeneous cystic masses with air-fluid levels in intrapulmonary bronchogenic cystic masses. Open thoracotomy was performed in 17 (70.8%) patients, and video-assisted thoracic surgery was performed in 7 (29.2%) patients. On pathological findings, there were 16 (66.7%) complicated cysts, and in 13 symptomatic patients, 11 (84.6%) patients had complicated cysts. There was no operative death in this study. During the follow-up period, no recurrence was detected. Conclusion: Intrathoracic bronchogenic cysts have a wide variety of clinical characteristics and radiologic findings. Even though some patients do not experience symptoms and signs caused by bronchogenic cysts, serious symptoms and complications may develop with the passage of time.

• 경영과학
• /
• 제32권1호
• /
• pp.83-100
• /
• 2015

We analyze a duopoly competition when two firms face input cost increases. The objective of this study is to determine the firms' optimal strategy between a price increase and downsizing under conditions of a spatially differentiated market and consumers' diminishing utility on the product size. We develop a theoretical model of two competing firms offering homogenous products using the standard Hotelling model to determine how firms' optimal strategies change when facing input cost increases. In this paper, there are two types of duopoly competitions: symmetric and asymmetric. In the symmetric case, the two firms have the same marginal cost and are producing and selling identical products. In the asymmetric case, the two firms have different marginal costs. The results show that the optimal strategy decision depends on the size of the input cost increase and the cost differences between the two firms. We find that when two firms are asymmetric (i.e., they have different marginal costs), the two firms might choose asymmetric pairs of strategies in equilibrium under certain conditions. When the cost differences between the two firms are sufficiently large and the cost increase is sufficiently small, the cost leader chooses price increase, and the cost-disadvantaged firm chooses downsizing in equilibrium. This asymmetric strategy reduces price competition between two firms, and consumers are better off. When the cost differences between the two firms are sufficiently large, downsizing is the dominant strategy for the cost-disadvantaged firm. The cost-disadvantaged firm finds it more profitable to reduce the product size than to increase its price to reduce price competition, because consumers prefer downsizing to price increases. This paper might be a good starting point for further analytical research in this area.