• Journal of Magnetics
• /
• v.7 no.4
• /
• pp.138-142
• /
• 2002

Magnetic properties, microstructure and texture of NdFeB magnets fabricated by a modified hot working process from commercial melt-spun powders (Magnequench; MQPA, MQPB and MQPB＋) have been investigated. The hot-pressed isotropic magnet made from MQPA powder, which contains higher Nd content than that of MQPB or MQPB＋, shows higher coercivity. The magnet also shows homogenous and fine grains with higher coercivity for higher consolidation pressure. The hot-deformed MQPA magnet shows a strong anisotropy along the press direction with homogeneous platelet Nd$_2$Fe$_{14}$B grains of 50∼100nm in thickness and 200∼500nm in length. The hot-deformed MQPB＋ magnet, however, shows low remanence and low coercivity. The microstructure of the magnet consists of two areas; undeformed Nd$_2$Fe$_{14}$B grains and well-aligned but large grains with 3∼4 $\mu$m in length. Low Nd content attributes to the formation of the two different area.

• The Korean Journal of Gastroenterology
• /
• v.72 no.5
• /
• pp.258-261
• /
• 2018

Esophageal basaloid squamous carcinoma (BSC) is a rare, aggressive variant of squamous cell carcinoma. BSC is usually diagnosed in advanced stage and its prognosis is relatively poor. A 59-year-old male with subepithelial lesion of the esophagus that was incidentally discovered during health promotion examination was referred to our hospital. Esophagogastroduodenoscopy showed a 10-mm bulging mucosa with an intact surface at 34 cm from incisor teeth. Endoscopic ultrasonography revealed a smooth margined homogenous hypoechoic lesion, measuring $11.3{\times}3.9mm$ with a submucosal layer of origin. The patient underwent endoscopic mucosal resection of the subepithelial lesion. Pathologic examination of the resected specimen revealed BSC with involvement of vertical margin by tumor. The patient then underwent radiotherapy, and is doing well without recurrence for 35 months. We report a case of esophageal BSC confined to submucosal layer successfully treated with endoscopic resection followed by radiation.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1333-1344
• /
• 2019

An integrated approach of model simplification for high burnup spent nuclear fuel is proposed based on material calibration using optimization. The spent fuel rods are simplified into a beam with a homogenous isotropic material. The proposed approach of model simplification is applied to fuel rods with two kinds of interfacial configurations between the fuel pellets and cladding. The differences among the generated models and the effects of interfacial bonding efficiency are discussed. The strategy of model simplification adopted in this work is to force the simplified beam model of spent fuel rods to possess the same compliance and failure characteristics under critical loads as those that result in the failure of detailed fuel rod models. It is envisioned that the simplified model would enable the assessment of fuel rod failure through an assembly-level analysis, without resorting to a refined model for an individual fuel rod. The effective material properties of the simplified beam model were successfully identified using the integrated optimization process. The feasibility of using the developed simplified beam models in dynamic impact simulations for a horizontal drop condition is examined, and discussions are provided.

• Geomechanics and Engineering
• /
• v.19 no.1
• /
• pp.71-78
• /
• 2019

Massive investments are going on to promote and build transportation infrastructure all across the globe with the challenges being more than budgetary. Sandy soils which are predominant in coastal and border areas in India have typical characteristics. The shear strength of such soil is very low which makes it difficult for any kind of geotechnical construction and hence soil stabilization needs to be carried out for such soil conditions. The use of geocells is one of the most economical methods of soil improvement which is used to increase strength and stiffness and reduce the liquefaction potential of the soil. The use of geocells in stabilizing desert sand and results from a series of plate load test on unreinforced soil and geocell reinforced homogenous sand beds are presented in the present study. It also compares the field results using various load class vehicles like heavy load military vehicles on geocell reinforced soils with the experimental results and comes out with the fact that the proposed technique increases the strength and stiffness of sandy soil considerably and provides a solution for preventing settlement and subsidence.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.324-330
• /
• 2019

To recycle raw fly ash (RFA), a waste from thermal power plants, it was used to prepare solid catalysts which have many advantages compared with homogenous catalysts. When biodiesel was produced from soybean oil using RFA, only 1.2% of biodiesel conversion was obtained. A metal hydroxide, NaOH, KOH or $Ca(OH)_2$, was mixed with the acid-treated fly ash (ATFA), and the mixture was calcined at $700^{\circ}C$ for 3 h to prepare the solid catalyst. The solid catalyst prepared by mixing ATFA with NaOH, designated as SC-Na, showed a better performance than those prepared by mixing ATFA with KOH or $Ca(OH)_2$, respectively. The optimal mass ratio of ATFA with NaOH was 1:3, at which the proportion of $Na_2O$ increased to 60.2% in SC-Na, and 97.8% of biodiesel conversion was achieved under optimal reaction conditions (2 w% SC-Na relative to oil and 5 mL-methanol/g-oil at $50^{\circ}C$ for 4 h). Finally, a batch operation was repeatedly carried out to test the feasibility of reusing the solid catalyst, and more than 96% biodiesel conversion was stably achieved for the third round of operations. This study shows that RFA was successfully recycled to solid catalysts through a simple preparation method, and the solid catalyst was reused for the production of biodiesel with high conversion.

• Journal of Climate Change Research
• /
• v.6 no.3
• /
• pp.167-173
• /
• 2015

The purpose of study is to identify trophic pathways from organic matter to macroinvertebrates in terms of the consumer and to characterize the food webs in an intermittent stream system of the Echi River in Japan. The ${\delta}^{13}C$ values of macroinvertebrates and their potential food sources indicated the scraper (Psephenoides spp., Ecdyonurus levis) and collector-gatherer (Ephemera strigata, Paraleptonphlebia chocolata) feed on periphyton and POM (particulate organic matter) in situ. Davidius lunatus, and Hexatoma spp., which were identified as predators, may feed upon Ephemera strigata and Stenelmis larvae, respectively. At station characterized by seepage water, the ${\delta}^{15}N$ values of Ecdyonurus levis, Lymnaea auricularia, and Rhyacophila nigrocephala larva probably showed relatively lower values according to its diets. Even in homogenous species, the trophic pathways of macroinvertebrates in situ exhibited considerable variation; this reflected the trophic pathways from organic matter to the consumer depending on habitat characteristics in stream.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1218-1230
• /
• 2019

A sub-channel solver, named ${\underline{S}}teady$ and ${\underline{T}}ransient$ ${\underline{A}}nalyzer$ for ${\underline{R}}eactor$ ${\underline{T}}hermal$ hydraulics (START), has been developed using the homogenous model for two-phase conditions of light water reactors. The code is developed as a fast and accurate TH-solver for coupled and multi-physics calculations. START has been validated against the NUPEC PWR Sub-channel and Bundle Test (PSBT) database. Tests like single-channel quality and void-fraction for steady state, outlet fluid temperature for steady state, rod-bundle quality and void-fraction for both steady state and transient conditions have been analyzed and compared with experimental values. Results reveal a good accuracy of solution for both steady state and transient scenarios. Axially different values for turbulent mixing coefficient are used based on different grid-spacer types. This provides better results as compared to using a single value of turbulent mixing coefficient. Code-to-code evaluation of PSBT results by the START code compares well with other industrial codes. The START code has been parallelized with the OpenMP algorithm and its numerical performance is evaluated with a large whole PWR core. Scaling study of START shows a good parallel performance.

• Asian Journal of Business Environment
• /
• v.11 no.1
• /
• pp.5-15
• /
• 2021

Purpose: The study aims to delineate Shariah Governance Framework (SGF) by applying the components of New Institutional Theory (NIT) to provide an understanding of how Islamic banks theoretically influence Shariah Governance (SG) practice, structure, and process. Design/methodology/approach: As it is a conceptual paper, this paper has prepared based on an analytical approach to show how such institutions could provide a more effective system concerning the contents, procedures, and practices for the multiple users in the SG process of Islamic banks. Findings: The paper critically explores the adoption of NIT to develop SGF with its existing practice, structure, and procedure. Utilizing NIT, a proposed theoretical framework has developed for exploring the SG through its major components, i.e., 'isomorphism' and 'legitimacy'. It is stated that NIT can offer a useful framework by which homogenous structures, comprising guidelines, standards, and practices become recognized and authorized as a satisfactory standard corporate exercise. Thus, the proposed theoretical framework would be beneficial in understanding and exploring the SGF. Conclusion: The application of this SGF could help to justify the key dimensions of NIT with its overall formation, function, and practices that might also help to attain legitimacy.

• Korean Journal of Materials Research
• /
• v.31 no.1
• /
• pp.1-7
• /
• 2021

The characteristics and morphology of precipitated calcium carbonate (PCC) particles produced by carbonation process with various experimental conditions are investigated in this study. The crystal structures of PCC formed by carbonation process are calcite and aragonite. The crystal structure of PCC particles synthesized without adipic acid additive is calcite only, regardless of the reaction temperature. Needle-like shape aragonite phase started to form at reactor temperature of 80℃ with the adipic acid additive. Particle size of the single phase calcite PCC synthesized without adipic acid additive is about 1 ~ 3 ㎛, with homogenous distribution. The aragonite PCC also shows uniform size distribution. The reaction temperature and concentration of adipic acid additive do not show any significant effects on the particle size distribution. Aragonite phase grown to a large aspect ratio of needle-like shape showed relatively improved whiteness. The measured whiteness value of single calcite phase is about 95.95, while that of the mixture of calcite and aragonite is about 99.11.

• Journal of Veterinary Clinics
• /
• v.37 no.6
• /
• pp.317-323
• /
• 2020

The aims of this study were to describe the appearance and size of the normal canine prostate using magnetic resonance (MR) imaging and to calculate the apparent diffusion coefficient (ADC) values. MR images were obtained from seven intact male beagle dogs using a 1.5 T MR unit. The sequences included pre- and post-contrast T1- and T2-weighted imaging with and without fat saturation. The signal intensity of the prostate was compared with the adjacent musculature, fat, and urine in the urinary bladder. We recorded the mean prostatic length, width, and height and the length of the sixth lumbar vertebral body (L6). In addition, the prostatic length (rL), width (rW), and height (rH) ratios to L6 were calculated. Diffusion-weighted images of the prostate were obtained and ADC values were calculated. The prostate was bilobed and oval-shaped, homogenous on T1-weighted images, and heterogeneous with radiating lines on T2-weighted images. Post-contrast T1-weighted sequences showed contrast enhancement of the central and radiating striations. The prostatic capsule was clearly identified on post-contrast T1-weighted images with fat saturation. The ADC values were 1.72-2.04 × 10-3mm2/sec (mean, 1.88 × 10-3mm2/sec). Knowledge of the normal appearance of the prostate on MR images is essential to assess prostatic diseases in dogs.