• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.905-908
• /
• 2009

In the management of groundwater in coastal areas, saltwater intrusion associated with extensive groundwater pumping, is an important problem. The groundwater optimization model is an advanced method to study the aquifer and decide the optimal pumping rates or optimal well locations. Cheng and Park gave the analytical solutions to the optimization problems basing on Strack's analytical solution. However, the analytical solutions have some limitations of the property of aquifer, boundary conditions, and so on. A simulation-optimization numerical method presented in this study can deal with non-homogenous aquifers and various complex boundary conditions. This simulation-optimization model includes the sharp interface solution which solves the same governing equation with Strack's analytical solution, therefore, the freshwater head and saltwater thickness should be in the same conditions, that can lead to the comparable results in optimal pumping rates and optimal well locations for both of the solutions. It is noticed that the analytical solutions can only be applied on the infinite domain aquifer, while it is impossible to get a numerical model with infinite domain. To compare the numerical model with the analytical solutions, calculation of the equivalent boundary flux was planted into the numerical model so that the numerical model can have the same conditions in steady state with analytical solutions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.7 no.1
• /
• pp.75-83
• /
• 1980

Rickets is not the deposite of minerals in the skeletal tissue and the retardation of skeletal growth in growing in growing animals. This study was undertaken to investigate the histologic effects of experimental rickets on the dental structure of the albino rats, and to show the relationship between the histological effects and the pulpal disease which induced premature loss of the primary teeth. This study was based on material obtained from 40 white rats that were placed on a rachitogenic diet for a period 1 to 56 days after weaning (at 24 days). In addition, a study was made of 25 litter mates, 24 to 80 days, that were fed a normal diet. The following results were obtained: 1. Enamel formation and calcification showed no significant changes and no hypoplasia. 2. Dentin formation and calcification was retarded and disturbed. In the experimental group, predentin/calcified dentin was remarkablly increased. 3. Newly formed dentin showed interglobular texture (less homogenous calcification) and the predentin was significantly wider and thicker, and there was an irregular wave in the basal portion of the rat's incisors. 4. In cementum, Matrix formed at almost a normal rate but calcification was defective. So cementoid tissue was increasesd. 5. The formation of the alveolar bone was at almost a normal rate but calcification was retarded. The trabecular bone was filled with osteoid tissue and thicker than in normal groups.

• Journal of Chest Surgery
• /
• v.11 no.3
• /
• pp.246-252
• /
• 1978

A three year and seven month old girl with moderate depression deformity of the sternum associated with a huge well defined homogenous hazy mass density of the upper half of the right hemithorax on plain chest x-ray had developed, exertionaI dyspnea (Figs1, 2 and 3). Correction of the funnel chest was carried out with modified Ravitch procedure and resection of the intrathoracic cystic mass was performed through an anterolateral thoracotomy incision in one stage operation satisfactorily (Figs. 7 and 8). On exploration, the mass, $15{\times}12{\times}10$cm in size, was connected to the bronchus at 1cm a bove the carina by a stalk (Fig. 4). The outer surface showed abundant vasculature. The specimen was filled with mucoid material; the inner surface was much trabeculated. glistening and smooth (Fig. 5 and 6). yficroscopically, the cyst was lined with simple or pseudostratified ciliated columnar epithelium. The cystic wall was composed of loose fibrous connective tissue, muscle layers, cartilages with some lymphocytic infiltration (Fig. 9). Isolated cases of funnel chest deformity and congenital bronchogenic cystic disease are not uncommon; however, the assocbtion of the two conditions is yery rare. Therefore. report and review of the literature was done.

• The KIPS Transactions:PartB
• /
• v.11B no.4
• /
• pp.421-428
• /
• 2004

There are three texture descriptors in MPEG-7 : Homogeneous Texture, Edge Histogram and Texture Browsing. In this paper, a comparative analysis is presented on the capability of MPEG-7 texture descriptors for iris recognition as part of an MPEG-7 application using descriptors. Through the experiments of comparing the clustering efficiency and error distribution of the descriptors using 560 iris images, their discriminating capabilities for different iris groups are analyzed. The results show that Homogenous Texture descriptor is the best discriminator among three descriptors to recognize the iris pattern. However, compared with the conventional iris recognition methods, it needs more efforts to enhance the results.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.706-711
• /
• 2007

Numerical studies were performed to examine the effects of notch location of impact specimens on the failure behavior of HAZ (heat affected zone) when Charpy V-notch impact test were made at a low temperature ($1^{\circ}C$). Carbon steel plate (SA-516 Gr. 70) with thickness of 25mm for pressure vessel was welded by SMAW (shielded metal-arc welding) and specimens were fabricated from the welded plate. Charpy tests were then performed with specimens having different notch positions of specimens varying from the fusion line through HAZ to base metal. A series of finite element analysis which simulates the Charpy test and crack propagation initiating at the tip of V-notch was carried out as well. The finite element analysis takes into account the irregular fusion line and non-homogenous material properties due to the notch location of the specimen in HAZ. Results reveals that the energies absorbed during impact test depend significantly on the notch location and direction of specimen. Finite element analysis also demonstrates that the notch location of specimens, to a great extent, influences the reliability and consistency of the test.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.3
• /
• pp.207-215
• /
• 1993

In order to statistically predict $O_3$ levels in Seoul, the study used the TMS (telemeted air monitoring system) data from the Department of Environment, which have monitored at 20 sites in 1989 and 1990. Each data in each site was characterized by 6 major criteria pollutants ($SO_2, TSP, CO, NO_2, THC, and O_3$) and 2 meteorological parameters, such as wind speed and wind direction. To select proper variables and to determine each pollutant's behavior, univariate statistical analyses were extensively studied in the beginning, and then various applied statistical techniques like cluster analysis, regression analysis, and expert system have been intensively examined. For the initial study of high level $O_3$ prediction, the raw data set in each site was separated into 2 group based on 60 ppb $O_3$ level. A hierarchical cluster analysis was applied to classify the group based on 60 ppb $O_3$ into small calsses. Each class in each site has its own pattern. Next, multiple regression for each class was repeatedly applied to determine an $O_3$ prediction submodel and to determine outliers in each class based on a certain level of standardized redisual. Thus, a prediction submodel for each homogeneous class could be obtained. The study was extended to model $O_3$ prediction for both on-time basis and 1-hr after basis. Finally, an expect system was used to build a unified classification rule based on examples of the homogenous classes for all of sites. Thus, a concept of high level $O_3$ prediction model was developed for one of $O_3$ alert systems.

• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.981-995
• /
• 2015

This paper presents a finite element procedure for dynamic analysis of non-uniform Timoshenko beams made of axially Functionally Graded Material (FGM) under multiple moving point loads. The material properties are assumed to vary continuously in the longitudinal direction according to a predefined power law equation. A beam element, taking the effects of shear deformation and cross-sectional variation into account, is formulated by using exact polynomials derived from the governing differential equations of a uniform homogenous Timoshenko beam element. The dynamic responses of the beams are computed by using the implicit Newmark method. The numerical results show that the dynamic characteristics of the beams are greatly influenced by the number of moving point loads. The effects of the distance between the loads, material non-homogeneity, section profiles as well as aspect ratio on the dynamic responses of the beams are also investigated in detail and highlighted.

• Journal of Korean Neurosurgical Society
• /
• v.40 no.4
• /
• pp.277-280
• /
• 2006

Extracerebral cavernous hemangiomas are rare vascular tumors that are very difficult to remove because of severe intraoperative bleeding. We report a case of 57-year-old male with extracerebral cavernous hemangioma with review of 126 cases in the literature. Patient presented with blurred vision, diplopia, numbness on the left side of his face. Magnetic resonance imaging revealed a well defined mass of $3{\times}4{\times}3cm$ size with heterogenous iso-or hypointensity on T1-weighted image showing strong homogenous contrast enhancement and marked hyperintensity on T2-weighted image. Digital subtraction angiography[DSA] revealed a faint tumor blush by feeders from the left internal carotid artery[ICA] and left external carotid artery[ECA] in the delayed phase. Even with profuse intratumoral bleeding, near total removal was achieved. In addition to preoperative neurologic deficits such as ophthalmoplegia, facial numbness in the V1-2 dermatomes, ptosis appeared postoperatively.

• Steel and Composite Structures
• /
• v.18 no.6
• /
• pp.1541-1555
• /
• 2015

In this paper mechanical behavior of the functional gradient materials (FGM) micro-gripper under thermal load and DC voltage is numerically investigated taking into account the effect of intermolecular forces. In contrary to the similar previous works, which have been conducted for homogenous material, here, the FGM material has been implemented. It is assumed that the FGM micro-gripper is made of metal and ceramic and that material properties are changed continuously along the beam thickness according to a given function. The nonlinear governing equations of the static and dynamic deflection of microbeams have been derived using the coupled stress theory. The equations have been solved using the Galerkin based step-by-step linearization method (SSLM). The solution procedure has been evaluated against available data of literature showing good agreement. A parametric study has been conducted, focusing on the combined effects of important parameters included DC voltage, temperature variation, geometrical dimensions and ceramic volume concentration on the dynamic response and stability of the FGM micro-gripper.

• Structural Engineering and Mechanics
• /
• v.46 no.2
• /
• pp.213-229
• /
• 2013

Although performance based assessment procedures are mainly developed for reinforced concrete and steel buildings, URM (Unreinforced Masonry) buildings occupy significant portion of buildings in earthquake prone areas of the world as well as in IRAN. Variability of material properties, non-engineered nature of the construction and difficulties in structural analysis of masonry walls make analysis of URM buildings challenging. Despite sophisticated finite element models satisfy the modeling requirements, extensive experimental data for definition of material behavior and high computational resources are needed. Recently, nonlinear equivalent frame models which are developed assigning lumped plastic hinges to isotropic and homogenous equivalent frame elements are used for nonlinear modeling of URM buildings. The equivalent frame models are not novel for the analysis of masonry structures, but the actual potentialities have not yet been completely studied, particularly for non-linear applications. In the present paper an effective tool for the non-linear static analysis of 2D masonry walls is presented. The work presented in this study is about performance assessment of unreinforced brick masonry buildings through nonlinear equivalent frame modeling technique. Reliability of the proposed models is tested with a reversed cyclic experiment conducted on a full scale, two-story URM building at the University of Pavia. The pushover curves were found to provide good agreement with the experimental backbone curves. Furthermore, the results of analysis show that EFM (Equivalent Frame Model) with Dolce RO (rigid offset zone) and shell element have good agreement with finite element software and experimental results.