• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.199-200
• /
• 2008

In this paper, we researched optical characteristics of a holographic optical security system using a reflection recording material and optical random phase mask. The system have the property of optical security key with the phase mask. Also, a reflection recording geometry can reduced a size of the reconstruction system because a input beam to reconstruct a holographic image and a diffraction beam are the same side on the material.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.112-114
• /
• 1990

A method for fabrication of holographic optical elements (HOE) using dichromated gelatin (DGG) as a recording material is presented. we describe the holographic properties of the DGG and the processing techniques. Holographic characteristics of the DGG including exposure characteristics, diffraction efficiency and angular sensitivity are also discussed. The diffraction efficiency of the obtained holographic grating is about 84%.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.47-50
• /
• 1987

There are various holographic recording materials, such as Dichromated Gelatin, Silver Halide, Thermoplastic, Photoresist. In this paper especially, we used Photoresist to make the phase holographic grating. Deep-groove diffractive grating formed in relatively thin holographic recording material is to express high diffraction efficiency. Phase holographic grating recorded In photoresist can be used very practical because it has the high diffraction efficiency, and it is possible to make a replication easily. So, it has the merit in recording the optical holographic grating than any other materials.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.3
• /
• pp.141-144
• /
• 2006

In the present work, we investigated the holographic grating erasing method by means of the optical method. It was formed the grating under the interference of holographic recording He-Ne laser beams on chalcogenide $As_{40}Ge_{10}Se_{15}S_{35}$ thin film with various film thickness and erased the holographic grating by non-polarized He-Ne laser beam. As the results, the recording grating erased the 80 % of formed grating by non-polarized He-Ne laser beam. It was confirmed that the erasing characteristics by non-polarized laser beam need to improve the focusing of beam and the control of beam intensity. And then it can be expected as the application possibility of rewritable holographic memory technology.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.571-574
• /
• 2002

The photorefractive polymeric composite with good performance was prepared. The carbazole-substituted polysiloxane sensitized by 2,4,7-trinitro-9-fluorenone was used as a photoconducting medium and 1-[4-(2-nitrovinyl)phenyl]piperidine was added as an optically nonlinear chromophore. The photorefractive property of polymer was determined by diffraction efficiency using a 100 ㎛-thick film. The maximum diffraction efficiency ( ηmax) of 71% was obtained at the electric field of 70 V/ ㎛. The potential of the current polymer material as a holographic recording medium was evaluated by the demonstration of holographic recording and subsequent reading of optical image.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.5
• /
• pp.403-407
• /
• 2010

This paper shows that the diffraction efficiency is influenced by superadditivity for the combination of the different developing agent and concentrations in the reversal bleach applied to the Slavich PFG-01 plate to be used for recording transmission holograms. The four developers based on ascorbic acid in combination with metol, phenidone, hydroquinone respectively, were studied. In diffraction efficiency aspect, the superadditivity effect of mixture of two developing agents is lower than one developing agent developer, AAC in the reversal bleach.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.92-95
• /
• 2005

The silver photodoping effect in amorphous AsGeSeS chalcogenide thin films for holographic recording has been investigated using a HeNe laser ($\lambda$=632.8 nm). The chalcogenide films prepared in this work were thinner in comparison with the penetration depth of recording light ($d_p$=1.66 mm). The variation of the diffraction efficiency $(\eta)$ in amorphous chalcogende films exhibits a tendency, independently of the Ag photodoping. That is, n increases relatively rapidly at the beginning of the recording process, reaches the maximum $({\eta}_{max})$ and slowly decreases. In addition, the value of ${\eta}_{max}$ depends strongly on chalcogenide film thickness(d) and its peak among the films with d = 40, 80, 150, 300, and 633 nm is observed at d = 150 nm (approximately 1/2n), where n is refractive index of the chalcogenide (n=2.0). The ${\eta}$ is largely enhanced by Ag photodoping into the chalcogenides. In particular, the value of hmax in a bilayer of 10-nm-thick Ag/150-nm-thick AsGeSeS film is about 1.6%, which corresponds to ~20 times in comparison with that of the AsGeSeS film (without Ag).

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.1
• /
• pp.13-16
• /
• 2007

The purpose of this paper is real time tilt servo control of the holographic data storage system. Holographic data storage device is a next generation data storage device with high storage density, high transfer rate and short access time. This device is very sensitive to a disturbance due to the enormous storage density. As to the recording material changed disc type, the media continuously vibrates as the disc rotates. When disc rotates, deviation, eccentricity and unbalance disturbance are occurred. This disturbances cause disc tilt, finally reference beam does not illuminates to correct incidence angle. Therefore real time tilt servo control is essential. In this paper, the algorithm is proposed to make real time tilt detection in angle multiplexing of the holographic data storage system with an additional servo beam and the experiments are performed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5C
• /
• pp.716-725
• /
• 2004

In this paper, a new multiview stereoscopic 3D display system using a VHLS(volume holographic lenticular sheet) is suggested. The VHLS, which acts just like an optical direction modulator, can be implemented by recording the diffraction gratings corresponding each directional vector of the multiview stereoscopic images in the holographic recording material by using the angularly multiplexed recording property of the conventional volume hologram. Then, this fabricated VHLS is attached to the panel of a LCD spatial light modulator and used to diffract each of the multiview image loaded in a SLM to the corresponding spatial direction for making a 3D stereo view-zone. Accordingly, in this paper, the operational principle and characteristics of the VHLS are analyzed and an optimized 4-view VHLS is fabricated by using a commercial photopolymer. Then, a new VHLS-based 4-view stereoscopic 3D display system is implemented. Through some experimental results using a 4-view image synthesized with adaptive disparity estimation algorithm, it is suggested that implementation of a new VHLS-based multiview stereoscopic 3D display system can be possible.

• Journal of Science Education
• /
• v.34 no.2
• /
• pp.203-210
• /
• 2010

The characteristics of diffraction gratings, fabricated using Slavich PFG-01 plates as a holographic recording material, were investigated using various bleach techniques. The changes in diffraction efficiencies, under given development conditions, resulting from the use of a new reversal bleach and a new fixation free rehalogenating bleach are investigated. From the experimental results, it was found that the diffraction efficiencies are influenced by the composition of the developer, the reversal bleach and the fixation free rehalogenating bleach. In this study, the highest values of the maximum diffraction efficiency was obtained when PFG-01 plates were developed in AAC developers contained with l-ascorbic acid 20 g/L and sodium carbonate 60 g/L, processed by a reversal bleach, as high as 89.0%. Moreover, the maximum diffraction efficiency of 82.1% was obtained when PFG-01 plates were processed by a fixation free rehalogenating bleach. In addition, higher diffraction efficiencies are yielded in the case of the revesal bleach than in the case of the fixation free rehalogenating bleach.