• 한국초전도ㆍ저온공학회논문지
• /
• 제11권2호
• /
• pp.15-19
• /
• 2009

Bulk $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) superconductor was manufactured with the top-seeded melt grown method. The 9, 16, and 25 holes, as small as 0.7mm in diameter, parallel to the c-axis were mechanically drilled. Magnetic flux mapping and levitation force were measured and compared to estimate the influence of multiple holes on the magnetic properties of YBCO superconductor at 77K. According to the measurements, the maximum magnetic flux density obtained from the plain sample was 2.48kG, while the maximum magnetic flux density of the sample with 25 holes was low as around 2.29kG. The levitation force measured on the sample with 9 holes increased from 91N to 105N. The levitation force measured on the samples with 9 holes is relatively higher than the plain sample without any holes. In this case, increase of the levitation force in the perforated samples could be explained by enhancement of the cooling efficiency more effectively. We investigated that the magnetic properties of YBCO superconductor were strongly influenced by the artificial holes.

• Journal of the Korean Wood Science and Technology
• /
• 제19권3호
• /
• pp.27-34
• /
• 1991

Screw withdrawal test was carried out on the face and edge of domestic particleboard and medium density fiberboard in order to evaluate optimum pilot hole diameter. The obtained results were as follows: 1. Maximum withdrawal strengths on the face and edge of particleboard were obtained with pilot hole diameters at about 50% of root diameters of screw. 2. Maximum withdrawal strength on the face and edge of medium density fiberboard were obtained with pilot hole diameters that were about 60% and 50% of root diameters of screw, respectively. 3. Withdrawal strength showed about 91% of maximum withdrawal strength when pilot holes were not pre bored at particleboard. but when pilot holes at 90% of root diameter of screw withdrawal strength showed about as 51.3% of maximum withdrawal strength. 4. Withdrawal strength showed about 88% of maximum strength when pilot holes were not used, but withdrawal strength indicated 55.4% of maximum strength in case of 90% of root diameters of screw. 5. Maximum withdrawal strength on the face of particleboard was about 70.5% higher than that of the edge, and however medium density fiberboard was about 19.6% higher than that of the edge.

• 천문학회보
• /
• 제40권1호
• /
• pp.86.3-86.3
• /
• 2015

There could be significant numbers of isolated stellar mass black holes in our Galaxy. The detection of these black holes will provide important clues on the origin of supermassive black holes. Interstellar gas will be accreted to these isolated black holes in nearly spherical flow. The gas and the interstellar magnetic field will be compressed and emit bremsstrahlung and magnetic bremsstrahlung. We calculate the density, temperature, magnetic field of the accretion flow onto a 10 solar mass black hole as well as its radiative emission; special attention is given to cyclotron radiation and synchrotron radiation, which covers from microwave to X-ray. We consider the possibility to detect these radiation from isolated Galactic black holes with current instruments and surveys.

• 한국전산구조공학회논문집
• /
• 제20권1호
• /
• pp.9-18
• /
• 2007

본 연구에서는 위상최적화 알고리즘의 수렴성을 개선하기 위해 설계영역에 초기 구멍을 도입하는 방법을 제시하는데, 이것은 경계면에 기초한 최적화 방법의 느린 수렴성을 완화하기 위해, Eschenauer et al.에 의해 고안된 버블 방법의 설계영역 안에 구멍을 도입하는 개념과 연계된다. 버블 방법과 달리, 제안된 방법에서는 최적화 과정동안 구멍의 위치를 정의하는 특성함수를 이용하지 않고, 최적화 초기화 단계에서만 초기 구멍을 도입하는데, 이러한 초기 설계영역 안의 솔리드와 보이드 영역들은 고정되는 것이 아니라 합쳐지거나 쪼개지면서 변화된다. 따라서 위상최적화 알고리즘에서 구멍의 이동에 관련된 복잡한 수치적인 계산 없이 자동적으로 설계변수의 유한변화를 더욱 강화시키기 때문에 목적함수 값의 수렴성을 개선할 수 있다. 본 논문에서는 다양한 치수와 형상의 구멍을 포함하는 초기 설계영역을 가지는 Michell형 보의 위상 최적설계를 밀도분포법으로 불리는 SIMP를 이용하여 수행하였다. 이를 통해 위상최적화의 수렴성을 개선하고 최적위상과 형상에 영향을 미치는 초기 구멍의 효과를 검증하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제32권6호
• /
• pp.50-56
• /
• 2004

This study was conducted to investigate the performance of sound absorption type-noise barriers manufactured with a combination of wood particles used for particleboard, recycled waste newspaper, and cement. An average density of wood-combined cement board was in the range from 0.83 to 0.96 g/cm³, showing relatively low-density board. Regardless of types of cement bonded board or wooden board, the board with concave holes(凹)-formed surfaces showed greater sound absorption coefficient compared to those of flat surface boards. The board density was not related with those coefficients. Accordingly, it was concluded that concave or deep corrugated surface structure has played an important role in sound absorption for the application of sound absorption type-noise barrier.

• Tribology and Lubricants
• /
• 제31권1호
• /
• pp.21-27
• /
• 2015

We carry out experiments to characterize textured bearing steel with varying hole density and depth. Textured surface is believed to reduce the friction coefficient, and improve performance and wearing caused by third-body contact. We employ three lubrication regime conditions based on the Stribeck curve: boundary lubrication, mixed lubrication, and hydrodynamic lubrication. Ultrasonic machining is an untraditional machining method wherein abrasive grit particles are used. The hammering process on the work piece surface by abrasive provides the desired form. In this study, we create multi-holes on the bearing steel surface for texturing purposes. Holes are formed by an ultrasonic machine with a diameter of 0.534 mm and a depth of about 2-4 mm, and they are distributed on the contact surface with a density between 1.37-2.23%. The hole density over the surface area is an important factor affecting the friction. We test nine types of textured specimens using four times replication and compare them with the untextured specimen using graphs, as well as photographs taken using a scanning electron microscope. We use Analyzes variant in this experiment to find the correlation between each pair of treatments. Finally, we report the effect of hole density and depth on the friction coefficient.

• 한국정밀공학회지
• /
• 제27권10호
• /
• pp.14-22
• /
• 2010

The most costly and time-consuming process in the fabrication of today's multi-layer circuit board is drilling interconnection holes between adjacent layers and via holes within a layer. Decreasing size of via holes being demanded and growing number of via holes per panel increase drilling costs. Component density and electronic functionality of today's multi-layer circuit boards can be improved with the introduction of cost-effective, variable depth laser drilled blind micro via holes, and interconnection holes. Laser technology is being quickly adopted into the circuit board industry but can be accelerated with the introduction of a true production laser drilling system. In order to get optimized condition for drilling to FPCB (Flexible Printed Circuit Board), we use various drill pattern as drill step. For productivity, we investigate drill path optimization method. And for the precise drilling the thermal drift of scanner and temperature change of scan system are tested.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2005년도 제7회 특별심포지움 논문집
• /
• pp.73-82
• /
• 2005

국내에서 처음으로 지구물리검층 보정을 위한 모형시추공이 건설되었으며 이들 모형시추공을 이용한 검출기 보정실험과 케이싱보정을 위한 기초실험을 실시하였다. 여기서는 세 가지 밀도와 세 가지공경으로 구성되는 모형 시추공의 건설 과정과 재원을 소개하고 이를 이용하여 구해진 선형 관계의 밀도-검출기 반응식을 검토하였다. 아울러 케이싱 보정을 위한 기초연구 결과 이격 보정용 차트가 제시되었고 이를 이용하여 이격 정도를 모르는 현장 측정에서도 참 밀도를 구할 수 있음을 밝혔다.

• 한국자기학회지
• /
• 제19권2호
• /
• pp.67-73
• /
• 2009

지하에 존재하는 빈 공간이 지상에서의 자속밀도 변화에 미치는 영향을 땅의 밀도와 측정높이에 따른 변화의 차이로 분석하였다. 밀도가 다른 지표면과 함몰지 및 지하터널이 있는 지표면에 대한 지자기의 자속밀도 분포를 플럭스게이트형 마그네토미터를 사용하여 조사하였다. 지하의 밀도가 감소하거나 빈 공간이 존재하면 지상에서의 자속밀도가 감소하는데, 경계에서부터 서서히 감소하여 중심부에서 가장 낮은 자속밀도를 나타낸다. 빈 공간에 의한 자속밀도의 감소는 지하 80m에 위치한 터널에 의해서도 관찰된다. 이러한 자속밀도 감소현상을 이용하면 지하의 천부에 존재하는 빈 공간, 저밀도 지역, 파쇄대 및 함몰지를 탐사할 수 있을 것으로 보인다.

• 한국환경생태학회지
• /
• 제23권2호
• /
• pp.220-232
• /
• 2009

참나무시들음병 발생지역의 임분구조 특성 파악을 통한 피해해석을 목적으로, 전라남도와 제주도를 제외한 전국 7개도 18개 참나무시들음병 발생지역을 대상으로 식생조사를 실시하였고(Group A), 아울러 참나무시들음병의 매개충인 광릉긴나무좀(Platypus koryoensis)에 의한 피해 모니터링을 목적으로 설치된 경기도와 강원도 내 5개 고정조사지에도 식생조사를 실시하였다(Group B). 그 결과 전국 18개 지역(Group A) 가운데 17개 지역에서 참나무속(Quercus spp.) 수종들의 우점도가 가장 높게 나타났으며, 참나무시들음병 피해 모니터링을 목적으로 설치한 5개 고정조사지(Group B)에서는 참나무시들음병 피해 정도를 나타내는 지표 가운데 하나인 천공률(Relative Density of Entrance Holes)과 조사지 내 참나무속 수종들의 상대밀도 간에 통계적으로 매우 유의한 상관관계($R^2=0.89$, p<0.05)가 인정되어, 임분구조상 참나무속 수종의 우점도는 참나무 시들음병의 발생과 관련성이 높은 것으로 판단되었다.