• Applied Science and Convergence Technology
• /
• v.27 no.4
• /
• pp.61-64
• /
• 2018

The basic principle and concept for hydrogen production via water-splitting process are introduced. In particular, recent research activities and their progress in the photoelectrochemical water-splitting process are investigated. The material perspectives of semiconducting photocatalysts are considered from metal oxides, including titanium oxides, to carbon compounds and perovskites. Various structural configurations, from conventional photoanodes with metal cathodes to tandem and nanostructures, are also studied. The pros and cons of each are described in terms of light absorption, charge separation/photoexcited electron-hole pair recombinations and further solar-to-hydrogen efficiency. In this research, we attempt to provide a broad view of up-to-date research and development as well as, possibly, future directions in the photoelectrochemical water-splitting field.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.499-505
• /
• 2001

The objective of the paper was to measure the pressure drop and to investigate the recirculation region of the conical orifices used in Kwang-yang Iron & Steel Company. The flow field with water used as a working fluid was the turbulent flow for Reynolds number of $2{\times}10^4$. The effective parameters for the pressure drop and the recirculation region were the conical orifice's inclined angle (${\theta}$) against the wall, the interval(L) between orifices, the relative angle of rotation(${\alpha}$) of the orifices, the shape of the orifice's hole(circle, rectangle, triangle) having the same area. It was found that the shape of the orifice's hole affected the pressure drop and the flow field a lot, But the other parameters did not make much differences to the pressure drop. The PISO algorithm with FLUENT code was employed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.988-992
• /
• 2002

Ultrasonic machining technology has been developed over recent years for the manufacture of and quality-assured precision parts for several industrial application such as optics, semiconductors, aerospace, and automobile application. The past decade has seen a tremendous in the use of ceramics in structural application. The excellent thermal, chemical and wear resistance of these material can be realized because of recent improvements in the overall strength and uniformity of advanced ceramics. Ultrasonic machining, in which abrasive particles in slurry with water are presented to the work surface in the presence of an ultrasonic-vibrating tool, is process which should be of considerable interest, as its potential is not limited by the electrical or chemical characteristics of the work material, making it suitable for application to ceramics. This paper intends to further the understanding of the basic mechanism of ultrasonic machining for brittle material and ultrasonic machining of ceramics based in the fracture-mechanic concept has been analyzed.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.4
• /
• pp.417-422
• /
• 2001

Every ship might be exposed to collision, grounding and/or various accidents. They may make some underwater holes on the hull. An underwater damage would cause her loss of buoyancy, trim, and inclination. Although a ship has some provisions against these accidents, if the circumstance is serious, she would be sunk or upsetted. Because of varieties of type of accidents, one could not prepare all of them. Many subdivision could prevent them, but it is difficult to realize it due to rising costs. This paper deals with physical phenomena of sinkage and an application on box type ship, and some results are earned as follows； 1. sinkage speed up to the level of the damage hole is increased proportionally, and is decreased proportionally after filling the level. 2. the curve of draft shows cup type of second order polynomial up to the damage hole level, and shows cap type of second order polynomial after filling the level. 3. if damage occurs beneath half of the draft, changes of head and displacement, and sinking speed follow almost straight lines. 4. by careful observation, sinkage speed could be predicted.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.161-170
• /
• 2006

Bender elements, composed of thin piezo-ceramics and elastic shims, have been used to measure shear wave velocities of specimens in laboratories. In a preliminary stage of their field applications, an in-house research of optimizing suitable bender elements and geometrical arrangement has been carried out in a barrel of kaolinite-water mixture. Two types of measurement configuration, similar to cross-hole and in-hole seismic testing, has been implemented. A pair of prototype instrumented rods was penetrated into a soft clay layer in the west coast and excellent shear waves were recorded. Development of penetration device(mandrel) and associated instrumented rods are in progress for deeper investigation.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.564-569
• /
• 2005

Recently, from the viewpoint of global wanning, natural gas CO2 is considered as a main refrigerant for hot water system. The characteristics of CO2 is not toxic, not flammable, high pressure, and high refrigerating capacity. Also it is widely available as a byproduct of industrial processes. This paper describes the performance analysis program of the swash plate type compressor using CO2 refrigerant. Estimates of the refrigerant flow rate, compression work, discharge temperature and volumetric, compressor efficiencies of the CO2 swash plate type compressor are obtained from the various design parameter such as the inclination angle of the swash plate, discharge hole area and suction hole area.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.33-36
• /
• 2009

Laser ablation with femtosecond lasers is highly promising for microfabrication of materials. Also, the high peak power of femtosecond lasers could induce a multiphoton absorption to ablate transparent materials. Similar results have also been were obtained in the case of optical fibers. In this paper, we present our experimental results of femtosecond laser microstructuring of optical fiber and its applications to microelectronic components and fiber optic devices. Finally, we directly produced micro holes with femtosecond laser pulses in a single step by moving an optical fiber in a preprogrammed structure. When water was introduced into a hole drilled from the bottom surface of the optical fiber, the effects of blocking and redeposition of ablated material were greatly reduced and the aspect ratio of the depth of the hole was increased. We have presented circular and rectangular-shaped holes in optical fiber.

• Journal of Korean Society for Quality Management
• /
• v.25 no.2
• /
• pp.15-27
• /
• 1997

This paper describes a highly accelerated life test (HALT, USPCBT) method for rapid qualification testing of STH PWB(Silver Through Hole Printed Wiring Boards). This method was carried out to be an alternative to the present time-consuming standard 1344 hours life testing(THB). The accelerated life test conditions were $121^{\circ}C$/95%R.H. at 50V bias and without bias. Their results are compared with those observed in the standard 1344 hours life test at $40^{\circ}C$/95%R.H. at 50V bias and without bias. The studies were focused on the samples time-to-failure as well as the associated conduction and failure mechanisms. The abrupt drop of insulation resistance is due to the absorption of water vapour. And the continuous drop of insulation resistance is due to the Ag migration. The ratios of time-to-failure of HALT(USPCBT) to THB were 25 and 11 at 50V bias and without bias respectively.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.11
• /
• pp.37-45
• /
• 2006

Bender elements, composed of thin piezo-ceramics and elastic shims, have been used to measure shear wave velocities of specimens in laboratories. In a preliminary stage of their field applications, an in-house research of optimizing suitable bender elements and their geometrical arrangement has been carried out in a barrel of kaolinite-water mixture. Two types of measurement configuration, similar to cross-hole and in-hole seismic testing, have been implemented. prototype instrumented rods were penetrated into a soft clay layer in the west coast and excellent shear waves were recorded. Development of penetration device (mandrel) and associated instrumented rods are in progress for deeper investigation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.2
• /
• pp.50-56
• /
• 1972

This study has been carried out to observe the driving and the intercepting effects of air screen on some sea-water fishes ; Chrysophrys major, Mylio macrocephalus, Fugu pardalis. 1. By perforating fine holes on the compressed air pipes, air screen was formed in the water, and this screen was set at $45^{\circ}$, and $90^{\circ}$ against the fish passage to observe the reactions on the part of the fish. 2. Changes were given to the location of the air screen in the water to observe how the air screen drived the fish to its direction. 3. The effective distance between holes on the air piprs was determined by a series of experiments of setting up two air screens of various types in hole distance, by moving a screen to-ward the other, and of observing the distance between two screens when fish eseape through the space. The results of the above experiments observed as follows were : 1. The passage of fish was effectively intercepted by setting up the air screens at 45 degrees against the fish passage and it was also intercepted when the screen was set at 90 degrees against the passage. 2. Fish could be driven by moving the air screen toward the fish. 3. The air screen formed from the pipe above than 0.3mm in diameter was effective, but less than 0.2mm was not sufficiently effective. 4. The strength of the air pressure in the pipe should be higher than $0.087kg/cm^2$. 5. The fish holding ability to obtain effective air screen was ranged as following when the air pressure was $0.160kg/cm^2$. and the hole diameter was 0.3mm on the 12.6mm pipe, depending upon the intervals of the holes on the pipe: The shortest distance which could hold fish between two screens was 59.4cm when the holes were perforated at every 40cm; 33.5cm when at every 30cm; 28.75cm when at every 10cm: and 27.25cm when at every 5cm. Thus, no significant change was at served when the holes were perforated more densely than 30cm intervals. Therefor the hole intervals should be 30cm in designing fishing gear employing air screen.