• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.5
• /
• pp.529-538
• /
• 1992

Recently, image signal processing techniques for HDTV signal have been drastically developed. This kind of skill improvement on signal processing need specific memory device for video signal. in this paper, data latch scheme which implements CMOS flip-flop to hold Information from in-put strobe and new reading method is devised to attain a proper access time suitable for HDTY signal. Compared with conventional write scheme, data latch method has two procedures to complete write operation : bit line write and storage cell write, enabling concurrent I /0 operation at the same address. Also, fast read access is possible through the method similar to static column mode and the separated read word line.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.418-421
• /
• 2007

Using gridded wind-stress products constructed by satellite scatterometers (ERS-1, 2 and QSCAT) data and those by numerical weather prediction(NWP) model(NCEP-reanalysis), we estimate wind-driven transports of the North Pacific subtropical gyre, and compare them in the central portion of the gyre (around 300 N) with geostrophic transports calculated from historical hydrographic data (World Ocean Database 2005). Even if there are some discrepancies between the wind-driven transports by the QSCAT and NCEP products, they are both in good agreement with the geostrophic transports within reasonable errors, except for the regional difference in the eastern part of the zone. The difference in the eastern part is characterized by an anticyclonic deviation of the geostrophic transport resulting from an anti-cyclonic anomalous flow in the surface layer, suggesting that it is related to the Eastern Gyral produced by the thermohaline process associated with the formation of the Eastern Subtropical Mode Water. We also examine the consistency of the Sverdrup transports estimated from these products by comparing them with the transports of the western boundary current, namely the Kuroshio regions, in previous studies. The net southward transport, based on the sum of the Sverdrup transports by QSCAT and NCEP products and the thermohaline transport, agrees well with the net northward transport of the western boundary current, namely the Kuroshio transport. From these results, it is concluded that the Sverdrup balance can hold in the North Pacific subtropical gyre.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.4
• /
• pp.166-169
• /
• 2007

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold type display mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by counting between on time and off time for video signal input during 1 frame (16.7 ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.35-40
• /
• 1998

A nonlinear attitude model of a satellite with thrusters, magnetic torquers and a reaction wheel cluster is developed. Then the linearized version of this satellite attitude model is derived far the attitude hold mode. For comparison purpose, various control methods are considered for attitude control of a satellite. We consider a proportional derivative controller which is actually used in the remote sensing satellite, KOMPSAT. Then a comparison is made with an H$_2$controller, an H$\sub$$\infty$/ controller, and a mixed H$_2$/ H$\sub$$\infty$/ controller. The analysis and numerical studies show that the proportional derivative controller's performance is limited in the sense that the pitch angle cannot approach zero. The simulations also show that among three control methods (H$_2$control, H$\sub$$\infty$/ control, and mixed H$_2$/ H$\sub$$\infty$/ control) H$_2$control has the fastest response time, H$\sub$$\infty$/ control has the slowest and mixed H$_2$/ H$\sub$$\infty$/ control comes in between the first two control methods. On the other hand, H$\sub$$\infty$/ control used least amount of control effort while H$_2$control required the most.

• Journal of Korean Society of Transportation
• /
• v.27 no.2
• /
• pp.157-168
• /
• 2009

The random utility theory and the multinomial logit model (including a more recent variant--the mixed multinomial logit) derived from it have constituted a back bone for theoretical and empirical analyses of various travel demand features including mode choice. In their empirical applications, however, it is customary to specify random utilities which are linear in modal attributes such as time and cost, and in socio-economic variables. The linearity helps easy derivation of important information such as value of travel time savings by calculating marginal rate of substitution between time and cost. In this paper the author focuses on the very linearity of the random utilities. Taking into account the fact that the mode chooser is also labour supplier, commodity consumer as well as leisure-seeker, the author sets up a maximization model of the traveller, which encompasses various economic activities of the traveller. The author derive from the model the indifference curve defined on the space of modal attributes, time and cost and investigate under what conditions the random utility of the traveller becomes linear. It turns out that there exist the conditions under which the random utility is really linear in modal attributes, but the property does not hold when the traveller has a corner solution on the space of modal attributes, or when the primary utility function of the traveller is directly affected by labour provided and/or the travel time itself. As a corollary of the analysis, a random utility is suggested, approximated up to the second order of the variables involved for empirical studies of the field.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.29-35
• /
• 2014

Purpose : This study has already started commercial Gated RapidArc automation equipment which was not previously in the Gated radiation therapy can be performed simultaneously with the VMAT Gated RapidArc radiation therapy to the accuracy of the analysis to evaluate the usability, Amplitude mode applied to the patient. Materials and Methods : The analysis of the distribution of radiation dose equivalent quality solid water phantom and GafChromic film was used Film QA film analysis program using the Gamma factor (3%, 3 mm). Three-dimensional dose distribution in order to check the accuracy of Matrixx dosimetry equipment and Compass was used for dose analysis program. Periodic breathing synchronized with solid phantom signals Phantom 4D Phantom and Varian RPM was created by breathing synchronized system, free breathing and breath holding at each of the dose distribution was analyzed. In order to apply to four patients from February 2013 to August 2013 with liver cancer targets enough to get a picture of 4DCT respiratory cycle and then patients are pratice to meet patient's breathing cycle phase mode using the patient eye goggles to see the pattern of the respiratory cycle to be able to follow exactly in a while 4DCT images were acquired. Gated RapidArc treatment Amplitude mode in order to create the breathing cycle breathing performed three times, and then at intervals of 40% to 60% 5-6 seconds and breathing exercises that can not stand (Fig. 5), 40% While they are treated 60% in the interval Beam On hold your breath when you press the button in a way that was treated with semi-automatic. Results : Non-respiratory and respiratory rotational intensity modulated radiation therapy technique absolute calculation dose of using computerized treatment plan were shown a difference of less than 1%, the difference between treatment technique was also less than 1%. Gamma (3%, 3 mm) and showed 99% agreement, each organ-specific dose difference were generally greater than 95% agreement. The rotational intensity modulated radiation therapy, respiratory synchronized to the respiratory cycle created Amplitude mode and the actual patient's breathing cycle could be seen that a good agreement. Conclusion : When you are treated Non-respiratory and respiratory method between volumetric intensity modulated radiation therapy rotation of the absolute dose and dose distribution showed a very good agreement. This breathing technique tuning volumetric intensity modulated radiation therapy using a rotary moving along the thoracic or abdominal breathing can be applied to the treatment of tumors is considered. The actual treatment of patients through the goggles of the respiratory cycle to create Amplitude mode Gated RapidArc treatment equipment that does not automatically apply to the results about 5-6 seconds stopped breathing in breathing synchronized rotary volumetric intensity modulated radiation therapy facilitate could see complement.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.658-665
• /
• 2014

The neural stimulators have been employed to the visual prostheses system based on the functional electrical stimulation (FES). Due to the size limitation of the implantable device, the smaller area of the unit current driver pixel is highly desired for higher resolution current stimulation system. This paper presents a 16-channel compact current-mode neural stimulator IC with digital to analog converter (DAC) sharing scheme for artificial retinal prostheses. The individual pixel circuits in the stimulator IC share a single 6 bit DAC using the sample-and-hold scheme. The DAC sharing scheme enables the simultaneous stimulation on multiple active pixels with a single DAC while maintaining small size and low power. The layout size of the stimulator circuit with the DAC sharing scheme is reduced to be 51.98 %, compared to the conventional scheme. The stimulator IC is designed using standard $0.18{\mu}m$ 1P6M process. The chip size except the I/O cells is $437{\mu}m{\times}501{\mu}m$.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.145-148
• /
• 2012

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold typedisplay mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by counting between on time and off time for video signal input during 1 frame (16.7ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1141-1149
• /
• 2009

Pulse style Nd: YAG Laser is suitable in skin remaking treatment, in compliance with the ramp continuous oscillation until of course normal takeoff, the Q-switch and mode motive takeoff the takeoff form which is various is possible and it is coming to be widely used in microsurgery and skin remaking promotion. According to therapeutic objective very it is important to control a energy density. Control of energy density the method which controls the pulse repetition rate of Laser output is mainly used. From the research which it sees pulse style Nd: It will be able to control the pulse repetition rate of YAG, the 2nd harmonic occurrence Laser (second harmonic generation: SHG) with the energy part of the light-wave which is a footnote wave number will hold and nonlinear decision it propagates and is converted by energy of the light-wave which is a footnote wave number the actual condition which and it applies the second harmonic occurrence in compliance with a secondary nonlinearity it leads and until skin deep part therapeutic possibility is the thing it will be able to observe simply.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.4
• /
• pp.335-342
• /
• 2000

A new control method for a single-phase active power filter, based on a load current estimation using a DC capacitor voltage of active power filter without sensing nonlinear load current, is proposed in this paper. Because the method proposed can remove the load current sensor in comparison with a conventional method sensing the load current and DC capacitor voltage together, it can make the active power filter easy installation, low cost, small size with no performance detriment. In addition, sample-hold technique and proportional control method is adopted to control the DC capacitor voltage and as no delay element such as LPF or PI control in the conventional method is used, the transient response is fast and good. Operation of a single-phase active power filter which consist of eight mode is explained according to utility voltage, compensation current and switch state, and compensation characteristics of active power filter using proposed method is verified by experiment.