• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제24회 추계학술대회
• /
• pp.189-194
• /
• 1996

The modern orthopaedics frequently uses the total hip replacement in the artificial hip joint. The wear in this joint requires the re-replacement of the hip joint beacuse it is under the severe load and friction conditions. To solve these problems the previous studies have been mainly focused on the development of the new materials. The research of new material, however, needs much time and effort since it should be experimented for its bio-compatibility, friction, and wear characteristics. To reduce the work, in this study, the finite element analysis is applied to find the new combination of the materials in the total hip replacement which has the excellent contact characteristics. The finite element uses MARC and the 5-node aximetric element. The results show that in case of acetabulum UHMWP has good characteristics, in femoral head, the $Al_2O_3$, and in stem, Ti6Al4V.

• 한국세라믹학회지
• /
• 제43권9호
• /
• pp.515-518
• /
• 2006

The microstructure of $ZrO_2$ toughened $Al_2O_3$ ceramics was carefully controlled so as to obtain dense and fine-grained ceramics, thereby improving the properties and reliability of the ceramics for capillary applications in semiconductor bonding technology. $Al_2O_3-ZrO_2(Y_2O_3)$ composite was produced via Ceramic Injection Molding (CIM) technology, followed by Sinter-HIP process. Room temperature strength, hardness, Young's modulus, thermal expansion coefficient and toughness were determined, as well as surface strengthening induced by the fine grained homogenous microstructure and the thermal treatment. The changes in alumina/zirconia grain size, sintering condition and HIP treatment were found to be correlated.

• 한국세라믹학회지
• /
• 제28권4호
• /
• pp.279-288
• /
• 1991

KIST/CARES reliability analysis program was used to calculate failure probabilities of piston pin and poppet valve. The 4-point bending test was performed on Sin/Hip Si3N4 for obtaining material parameters such as m, $\sigma$o, and KB, and the finite element analysis was performed using MSC/NASTRAN for obtaining stress distribution. The calculated failure probability of piston pin was lower than 10-6 and the failure probaility of poppet valve was greater than 0.95.

• 한국세라믹학회지
• /
• 제32권7호
• /
• pp.846-852
• /
• 1995

The multiply reinforced mullite-zirconia composites were prepared with addition of Al2O3 particles, platelets, and fibers. The sinter-HIP specimens (presintered at 1$700^{\circ}C$ and hipped at 1$600^{\circ}C$) showed that the fracture toughness of Al2O3 fiber reinforcement (4.4 MPa.{{{{ SQRT {m} }}) was higher than those of platelet (4.0 MPa.{{{{ SQRT {m} }}) and of particle (3.9MPa.{{{{ SQRT {m} }}) reinforcement, whereas the fracture strength of Al2O3 particle reinforcement (304 MPa) was higher than those of platelet (293MPa) and of fiber (248MPa) reinforcement.

• E2M - 전기 전자와 첨단 소재
• /
• 제3권3호
• /
• pp.215-223
• /
• 1990

Y-Ba-Cu-O계 고온 초전도체를 소결, 소결+HIP encapsulation방법으로 각각 제작하였다. 소결은 900.deg.C~960.deg.C에서 하였으며 소결시편의 일부는 HIP처리 하였는데 이때 HIP조건은 150MPa Ar압력에서 800.deg.C, 30min이었다. HIP시편의 상대밀도는 90%~93%의 밀도를 갖는 소결시편보다 5%~8% 증가하였다. 열처리 조건에 따른 x-ray 회절분석은 사방정-정방정 상변태를 보여주었다. 임계온도(Tc)는 91.deg.k 에서 전기비정항이 급격히 감소하기 시작하여 89.deg.k에서 완전히 0이 되었으며 전이폭은 3.deg.k내로 매우 좁았다. 임계전류밀도(Jc)는 소결시편의 경우 전형적인 ~159A/$cm^{2}$의 값을 보였으나 HIP처리 후 ~89A/$cm^{2}$로 감소했기 때문이라 생각하였다. 경도와 인성은 각각 38GPa과 2.9MPam$^{1}$2/로 증가하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 춘계학술대회 논문집
• /
• pp.10-12
• /
• 1988

High Tc Y-Ba-Cu-O Superconductors were fabricated by sintering, sintering + HIP and Hot Pressing. Specimens were sintered at $940^{\circ}C$ and $960^{\circ}C$. In case that sintered specimens were treated by HIP, the relative density was increased 5-6% in comparison with sintered ones. X-ray analysis of each specimens represented orthorhombic phase and Tc measurements showed a sharp drop in the temperature range $95-88^{\circ}K$. The relative density of hot pressed samples was lower than 80%.

• 패션비즈니스
• /
• 제2권1호
• /
• pp.86-99
• /
• 1998

The aim of this study to examine the Hip-Hop style, one of the fashion trends of the new generation in the 1990s and to come up with a design with a Hip-Hop image. As the Counterculture, Black Renaissance, Pop Star Syndrome, the importance of Hip-Hop fashion in mass culture was recognized and given a firm place as one of the major cultural trends of the 1990s. Hip-Hop fashion has a history: it originated from the Caribbean style in the 1940s and was transformed into Rude Boys style in the 1960s, Two-tone style and Rastafarians style in the 1970s. Finally it was succeeded by B-boys and Flygirls style. Hip-Hop style combines characteristics of all three styles mixed in one, which are as follows. First, Neo-Hip-Hop Fashion, Second, Hip-Hop Reggae Fashion and Third, Graffiti Fashion. Based on these three Hip-Hop images of the 19905, an attempt will be made to produce a Design Planning with a predicted 1998 fashion trend. This research provides order sheets on ready-made clothes designed for new generation in their late 10s and early 20s. Design Concept, Image Map, Fabric, color direction will be offered on the basis of an image map drawn in line with the three design concepts incorporating three sub themes of Liveliness, Modern Ethnic, and Dynamic Future. Three designs will be designed based on the following fashion themes$\ddot{o}$ Generation 'Y', Black Guys and Street Boys.

• 한국세라믹학회지
• /
• 제36권12호
• /
• pp.1381-1389
• /
• 1999

• 한국결정성장학회지
• /
• 제9권2호
• /
• pp.217-223
• /
• 1999

본 연구에서는 질화규소에 지르코니아 첨가량에 따른 효과를 조사하였다. 0 wt%~40 wt%의 지르코니아를 포함하는 세라믹 복합체 재료를 토대로 하는 질화규소를 $1750^{\circ}C$에서 172 MPa의 질소가스압으로 한 시간동안 유지하는 조건으로 hot isostatic pressing (HIP)하였다. 소결된 시편의 기계적 특성과 마모 특성을 조사하였다. 질화 규소-지르코니아 복합체는 지르코니아 양이 증가함에 따라 경도와 굽힘강도는 감소하였으나 밀도는 증가하였다. 그리고, 지르코니아 첨가량이 증가함에 따른 공기 중에서의 마모량은 감소하였으며, 공기 중에서의 마모 거동은 microcracking에 유관하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.116-119
• /
• 2000

The advantage of plasma-sprayed coating is their good resistance against thermal shock due to the porous state of the coated layer with a consequently low Youngs modulus. However, the existence of many pores with a bimodal distribution and a laminar structure in the coating reduces coating strength and oxidation protection of the base metals. In order to counteract these problems, there have been many efforts to obtain dense coatings by spraying under low pressure or vacuum and by controlling particle size and morphology of the spraying materials. The aim of the present study is to survey the effects of the HIP treatment between 1100 and 130$0^{\circ}C$ on plasma-sprayed oxide coating of A1$_2$O$_3$, A1$_2$O$_3$-SiO$_2$on the metal substrate (type C18N10T stainless steel). These effects were characterized by phase identification, Vickers hardness measurement, and tensile test before and after HIPing. These results show that high-pressure treatment has an advantage for improving adhesive strength and Vickers hardness of plasma-sprayed coatings.