• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.932-938
• /
• 2001

This study is concerned with the shape optimization of stem for the artificial hip prosthesis with unbonded cement mantle. The artificial hip prosthesis with unbonded cement mantle allows a stem to slip on cement mantle because of polished stem surface. Unbonded cement mantle type has several advantages compared with bonded cement mantle type, for example, small micro motion, preventing stress shielding and so on. In this study, 2-dimensional axisymmetric model was developed with considering characteristics of unbonded cement mantle. Moreover, optimal shape of stem was obtained by using feasible direction method. The objective of this optimization is maximizing supported vertical loading. The slip motion and stresses of stem, cement mantle and bone is used for constraints. The optimal shape which obtained by this study has slope of 0.15 in proximal part and maintains the width about 5mm in distal part In addition, simplified 3-dimensional analysis which applying optimal shape is carried out. The result of 3-dimensional analysis showed that optimal shape has some advantages for cement mantle stress. However, more realistic 3-dimensional analysis which including bending effect, complex geometries etc. is needed in further research.

• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.652-659
• /
• 2008

This study was designed to testify the possibility and devise the method to manipulate the 3D body scan data to produce rounded-belt pattern adaptable to hip-type variation of women in their 20's. The results of this research were as follows : Firstly, based on drop-value distribution of hip and waist girth, 151 subjects were classified into three hip-types; Type 1 (15.23%) was 'cylinder type', showing lowest drop-value, Type 2 (69.54%) was 'average type' and Type3 (15.23%) was 'hourglass type' showing highest drop-value. Secondly, using CAD program, design lines for round shape belt were set on the surface of 3D scan data of representative subject of each type. And divided 3D surfaces were flattened onto the plane by the internal tools of CAD program. The measure, 'lifting value of round belt pattern', implying the level of curve ratio of pattern was higher in back than front. This result might be linked to the fact that the hip part is more protruded than the abdomen part. And the measures also showed highest values in Type 3(hourglass type) and lowest in Type 1(cylinder type), meaning that the pattern of Type 3 showed more rounded shape than that of Type 1. This finding implied that round belt for body type having high drop-value should be shaped more curved. Thirdly, difference ratios of outline length and area between 3D curves(body surface) and 2D plane(pattern) were 4.5% and 1.3%, respectively. This result demonstrated and solidified the feasibility of designing digital garment pattern from 3D body scan data.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.2
• /
• pp.85-93
• /
• 2019

The purpose of this study is to provide basic data for the development of clothing which can improve the satisfaction of male university students' body shape by classifying the perception of body shape and examining characteristics by type. The types of recognition of body shape of male college students were classified into five types: developed upper body with protruding under abdomen, normal body with long legs, developed under body with big skeleton, skinny body, and ladder type normal body. The actual body shape was classified into three. The Y type had a long chest length and a shoulder developed, and the lower body silhouette was plain and short. Type H was flat with little protrusion from the chest to the hip. Type X has a larger hip and longer hip length than the waist. Body type was classified based on bust, waist, and hip circumference, but recognition body type was classified based on visual characteristics. It is thought that ergonomic consideration is needed to cover the disadvantages of each body type considering the aesthetic part as well as wearing comfort in accordance with the trend of the fashion market nowadays that the slim fit is generalized. This study was limited to male university students in their early 20s in Chungbuk province. Therefore, we could not grasp attitudes and perceptions of male university students living in other provinces. Therefore, we should pay attention to the generalization of the results of this study.

• Journal of the Korean Home Economics Association
• /
• v.35 no.4
• /
• pp.159-172
• /
• 1997

The purpose of this study was to investigate the slacks pattern making on the movement -fitness of the hip region. The experimental items were divided into the 5 lower limb movements(M1-M5) and the 12 revision pattern constructions of slacks. This study was done by clothing pressure test sensory evaluation test and the difference shape-transformation of wearing-slacks. The summarized finding resulted from experiments and investigation are suggested as follows: First by the clothing pressure tested by lower limb movements the clothing pressure score of the rabbit leap movement(M3) was the highest of all lower limb movements and the order of it in the another movement was the sit on knee(M4) the sit on chair(M2) the noble sitting(M5) from the highest to the lowest. And in comparision of clothing pressure tested by revision pattern to cover the extend of crotch-length 20。 inclined back-line construction method (CA4) showed the lowest. And in comparision of clothing pressure tested by revision pattern to cover the extend of crotch-length 20。 inclined back-line construction method (CA4) showed the lowest. And also for a role to cover hip circumference extendign CC4(1/5 hip.1cm longrightarrow linked back -line) method showed the lowest. Second by the sensory evaluation test based on the movement and revision patterns it was found that the functional factor score of the rabbit leap movement was the lowest in all movement however the score of revision patterns were higher than basic pattern. Third by the test to show difference in the shape-transformation of wearing-slacks on chair(M2) also need to be analyzed. The ration of the shape-transformation of the knee region showed the least value in the increased patterns of inclined angle of back-line(CA) and the differential methods of back-line inclined pattern making. But that of the hem-line did not show remarkable difference.

• Journal of Fashion Business
• /
• v.3 no.4
• /
• pp.131-138
• /
• 1999

The purpose of this study is to measure Korean, Chinese and Chosunjok college women's body part sizes, and then, classify their body shapes according to the drop value(hip circumference-chest circumference) as well as their statures, and thereupon, comparatively analyze the statistical distribution of their major body part measurements and thereby, provide for some basic data useful to the development of quality fitting apparels exportable to China. The results of this study can be summarized as follows; Most of Korean and Chinese college women were found to belong to the body type of "N" body shape, while many of Chosunjok college women belonged to "H" body shape body type characterized by normal stature but small difference between hip and chest circumferences. The most prevailing body type of Korean and Chinese college women next to "N" type(65%, 51%) was "H" (23%, 35%), followed by "A" type(12%, 14%), while that of Chosunjok college women was "H" type (54%), followed by "N" (40%) and "A" type (6%). On the other hand, in terms of distribution of major body part sizes, there was found a wide difference between Chinese and Korean college women. Chosunjok college women had similar body part sizes to Korean college women's in such measurements as waist back length, shoulder-to-shoulder length, front interscye length, back interscye length, under-chest circumference and weight, while having simliar body part sizes to Chinese college women's in such measures as stature, arm length, waist front length, waist side-hip line length, crotch length, head circumference, neck-root circumference and waist circumference.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.4
• /
• pp.129-136
• /
• 2019

The purpose of this study was to provide basic data necessary for the development of clothing that can improve the satisfaction of body shape of elderly men by examining subjective characteristics and characteristics of perception type of older men's body shape. Using the Q methodology, I investigated and analyzed the process of formation and main characteristics of subjectivity of various types of recognition that elderly men express about their body shape. There were four types of perception of body shape in elderly men: flat hip and bird legs skinny body, back bent and abdominal obese body, thick neck and upper body development body, forward cervical neck and protruding abdomen obese body. The actual body shape of elderly men was classified according to the bust, waist circumference, hip circumference, and body part angle. But recognition body shape of elderly men was classified by visual factors like the abdomen, the angle of the neck, the inclination of the back, the slope of the waist, and the degree of obesity. It is necessary to consider the trend of silver fashion which is increasing in demand. In addition, it is necessary to develop clothing patterns of comfortable fit through ergonomic study on the physical characteristics of older men. Consideration should be given to the design and pattern that can reduce the difference between the ideal body shape and the body shape recognized by older men.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.769-775
• /
• 2002

The results gained as part of the study on weldability of compositions from steels, aluminium, titanium alloys in various combinations including similar and dissimilar metal bonding variants with reference to solution of specific practical problems are presented in this work. It has been shown that in the case of HIP/DB carried out with direct interaction of bonding surfaces of the most dissimilar material combinations under study, formation of high-quality joints is not assured due to various reasons. That is why development of special bonding techniques was required. The bonding techniques developed and used for HIP/DB of dissimilar steels, "Steel-bronze", "Titanium-niobium"; "Titanium-steel" and other compositions under study ensured vacuum-tight microvoid-free joints strength of a which was equal to the milder parent metal, including those obtained at reduced welding pressures. Examples of new products manufactured by HIP/DB using the technologies developed are presented.

• The Research Journal of the Costume Culture
• /
• v.12 no.1
• /
• pp.121-135
• /
• 2004

The purpose of this study is to analyze the image evaluation and the preference of tailored jacket according to the body type and the degree of satisfaction with their body of middle-aged women. The subjects used for this study were three hundred and twenty three middle-aged women ranging from 35 to 50 years old. We measured their bodies and asked them report to the questionnaire. The results are as follows. 1) Middle-aged women were classified into four typical types of body. The type 1 was tall and thin and had a front view silhouette with the form of a letter X. The type 2 was the tallest and the medium of fatness and had a front view silhouette with the form of a letter H that the lower part of the body is short. The type 3 was the medium of height and width and had a front view silhouette with the form of a letter A that the upper part of the body is short compared with their height. The type 4 were the shortest and the fattest and had a front view silhouette with the form of a letter Y that the lower and upper parts of the body is the longest. 2) Middle-aged women roughly tended not to be satisfied with part of their body. The results showed that a neck was the most satisfied body part and the weight was the least satisfied as well as overall leg shape among all 13 body parts. 3) The type 1 had the highest the degree of satisfaction on their face size, upper arm girth, waist, hip girth, weight and body shape, etc., excepting hip shape among 4 body types.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.227-236
• /
• 2015

This study analyzed the lower body type of 30's Korean men to develop a slim-fit pants pattern. As the analysis data, direct measurement data of anthropometric measured value in the 6th Size Korea(KATS, 2010) was used as basic data with 481 men in 30's as analysis objects. The result are as follows. First, the result of analyzing factors for the lower body type classification indicated five factors. Second, the result of executing group analysis (with the independent variable of 5 clusters extracted from the factor analysis)classified the following three types. Type 1(36.8%) displayed a medium height of lower body type, small waist and hip, slim and fit body type with a slim shape between the knee and ankle. The shape between the waist and hip had characteristics of a slight curve and short length. Type 2(35.6%) displayed lowest height of a lower body type that was large and thick between the waist and the hip. The drop value of the waist and the hip was small; therefore, the body type was flat with a minimal curve. The underpart type (below the knee) was the thickest and the length was short. Type 3(27.7%) displayed the highest lower body type, a medium level waist size, flat and narrow waist and belly. This body type had a curve with big drop value of the waist and the hip, lower part from the hip to the ankle (including the knee) and a thick calf with along leg.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.4
• /
• pp.93-106
• /
• 2023

The study is to develop and present a leggings pattern that is suitable for the human body by using a standard body type avatar for a female in her 30s. As a research method, the average body type was selected from adult women in their 30s, and the appearance was evaluated using the CLO software program. The data analysis of this study compared the dimensions and shape of each part by legging. The leggings pattern suggested based on the above research results was determine to be a total length of 80.6cm and hip length of 24cm, and the knee length was set by dividing the legging in half from the waist to the hem and then adding 5cm. These figures were evaluated higher than Company D in terms of the adequacy of the upper part of the front and rear plates of Company A as well as the adequacy of the knee lines. Company A's figures were applied and corrected. For the front plate, the waist circumference was divided by 4, and 3.5cm was removed, and the hip circumference was set by dividing the hip circumference by 4, and 3.8cm was removed. In the appearance evaluation results Company D was highly evaluated in the suitability evaluation of the waist and hips, and the waist and hips were set using the pattern of Company D. The length of the front panel was modified by dividing the hip circumference by 4 and adding 1.8cm to the length, and the length of the back panel was modified by dividing the hip circumference by 3 and adding 8cm after dividing the hip circumference by 0.8cm.