• Hip & pelvis
• /
• v.34 no.1
• /
• pp.56-61
• /
• 2022

Purpose: Histopathologic analysis of femoral head specimens following total hip arthroplasty (THA) is a routine practice that represents a significant use of health care resources. However, it occasionally results in discovery of undiagnosed hematopoietic malignancy and other discrepant diagnoses such as avascular necrosis. The purpose of this study was to determine the rate of discordant and discrepant diagnoses discovered from routine histopathological evaluation of femoral heads following THA and perform a cost analysis of this practice. Materials and Methods: A review of patients undergoing primary THA between 2004-2017 was conducted. A comparison of the surgeon's preoperative and postoperative diagnosis, and the histopathologic diagnosis was performed. In cases where the clinical and histopathology differed, a review determined whether this resulted in a change in clinical management. Medicare reimbursement and previously published cost data corrected for inflation were utilized for cost calculations. Results: A review of 2,134 procedures was performed. The pathologic diagnosis matched the postoperative diagnosis in 96.0% of cases. Eighty-three cases (4.0%) had a discrepant diagnosis where treatment was not substantially altered. There was one case of discordant diagnosis where lymphoma was diagnosed and subsequently treated. The cost per discrepant diagnosis was $141,880 and per discordant diagnosis was $1,669 when using 100% Medicare reimbursement and Current Procedural Terminology (CPT) code combination 88304+88311. Conclusion: Histopathologic analysis of femoral head specimens in THAs showed an association with high costs given the rarity of discordant diagnoses. Routine use of the practice should be at the discretion of individual hospitals with consideration for cost and utility thresholds.

• Hip & pelvis
• /
• v.34 no.4
• /
• pp.227-235
• /
• 2022

Purpose: Outpatient classified total hip arthroplasty (THA) is a safe option for a select group of patients. An analysis of a national database was conducted to understand the risk factors for unplanned discharge to a skilled nursing facility (SNF) or acute rehabilitation (rehab) after outpatient classified THA. Materials and Methods: A query of the National Surgical Quality Improvement Program (NSQIP) database for THA (Current Procedural Terminology [CPT] 27130) performed from 2015 to 2018 was conducted. Patient demographics, American Society of Anesthesiologists (ASA) classification, functional status, NSQIP morbidity probability, operative time, length of stay (LOS), 30-day reoperation rate, readmission rate, and associated complications were collected. Results: A total of 2,896 patients underwent outpatient classified THA. The mean age of patients was 61.2 years. The mean body mass index (BMI) was 29.6 kg/m² with median ASA 2. The results of univariate comparison of SNF/rehab versus home discharge showed that a significantly higher percentage of females (58.7% vs. 46.8%), age >70 years (49.3% vs. 20.9%), ASA ≥3 (58.0% vs. 25.8%), BMI >35 kg/m² (23.3% vs. 16.2%), and hypoalbuminemia (8.0% vs. 1.5%) (P<0.0001) were discharged to SNF/rehab. The results of multivariable logistic regression showed that female sex (odds ratio [OR] 1.47; P=0.03), age >70 years (OR 3.08; P=0.001), ASA≥3 (OR 2.56; P=0.001), and preoperative hypoalbuminemia (<3.5 g/dL) (OR 3.76; P=0.001) were independent risk factors for SNF/rehab discharge. Conclusion: Risk factors associated with discharge to a SNF/rehab after outpatient classified THA were identified. Surgeons will be able to perform better risk stratification for patients who may require additional postoperative intervention.

• Hip & pelvis
• /
• v.34 no.2
• /
• pp.96-105
• /
• 2022

Purpose: Use of dual mobility (DM) articulations can reduce the risk of instability in both primary and revision total hip arthroplasty (THA). Knowledge regarding the impact of this design on patient-reported outcome measures (PROMs) is limited. This study aims to compare clinical outcomes between DM and fixed bearing (FB) prostheses following primary THA. Materials and Methods: All patients who underwent primary THA between 2011-2021 were reviewed retrospectively. Patients were separated into three cohorts: FB vs monoblock-D vs modular-DM. An evaluation of PROMs including HOOS, JR, and FJS-12, as well as discharge-disposition, 90-day readmissions, and revisions rates was performed. Propensity-score matching was performed to limit significant demographic differences, while ANOVA and chi-squared test were used for comparison of outcomes. Results: Of the 15,184 patients identified, 14,652 patients (96.5%) had a FB, 185 patients (1.2%) had a monoblock-DM, and 347 patients (2.3%) had a modular-DM prosthesis. After propensity-score matching, a total of 447 patients were matched comparison. There was no statistical difference in the 90-day readmission (P=0.584), revision rate (P=0.265), and 90-day readmission (P=0.365) and revision rate due to dislocation (P=0.365) between the cohorts. Discharge disposition was also non-significant (P=0.124). There was no statistical difference in FJS-12 scores at 3-months (P=0.820), 1-year (P=0.982), and 2-years (P=0.608) between the groups. Conclusion: DM bearings yield PROMs similar to those of FB implants in patients undergoing primary THA. Although DM implants are utilized more often in patients at higher-risk for instability, we suggest that similar patient satisfaction may be attained while achieving similar dislocation rates.

• Journal of Korean Foot and Ankle Society
• /
• v.22 no.1
• /
• pp.8-15
• /
• 2018

Ankle osteoarthritis is a debilitating condition that causes severe pain associated with functional impairment and decreased activity. Ankle osteoarthritis, unlike that of the knee or hip joint, is rare in primary arthritis. Most cases are traumatic arthritis that occur after ankle sprain or fractures or chronic ankle instability. Although ankle fusion has been regarded as the standard treatment of ankle osteoarthritis in the past, total ankle arthroplasty (TAA) is increasing due to the development of the implant design and surgical techniques. TAA is biomechanically superior to ankle fusion by preserving the movement of the ankle joint. In particular, it is functionally superior to ankle fusion because it enables normal joint motion during gait. In addition, there is an advantage of preserving the movement of the hindfoot and reducing the abnormal stress applied to the adjacent joints after ankle fusion to prevent the occurrence of long-term adjacent joint arthritis. Although the short-term and mid-term results of TAA have been reported to be excellent, long-term follow-up has a relatively low survival rate and high complication rate compared to total knee or hip arthroplasty. Therefore, continuous and further research is needed.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.263-266
• /
• 1997

Three dimensional numerical model based on the finite element method(FEM) were developed to predict the mechanical behavior of hip implants. The purpose of this study is to investigate the stress distribution of two types of cementless total hip replacement femoral component -a straight stem and a curved stem, and to compare their effect on the stress shielding between two types by three dimensional finite element method. The authors analyzed von Mises stress in the cortex & stem and compared the stress between the straight and the curved stem. In comparison of stresses between two different design of femoral stem, there was 25% more decrease of stress in straight stem than curved stem in the medial cortex at proximal region. The straight stem had consistently much lower stresses than the curved stem throughout the whole medial cortex with maximum 70% reduction of stress. However, there was little change in stress between nature and 2 implanted femur throughout the lateral cortex. Stress of femoral stem was much higher in the straight stem than the curved stem up to 60%. The straight stem had more chance of stress shielding and a risk of fatigue fracture of the stem compared with the curved stem in noncement hip arthroplasty. In design of femoral stem still we have to consider to develop design to distribute more even stress on the proximal medial cortex.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4031-4039
• /
• 2015

The problems related with blood supply shortage and the stability of blood transfusion are on the rise, as it is expected that the blood doners will decrease but the blood use amount for aged population will increase, owing to low birth and aged population increase. The purpose of this study is to analyze the hospital characteristics which affect patients receiving and non-receiving blood transfusion for the knee and hip total replacement arthroplasty. Data were collected from Health Insurance Review and Assessment Service's 2011 sample data, and 5,370 inpatients were abstracted from them. Logistic regression analysis was performed, using SPSS 20. Independent variables used are hospital characteristics variables and patient characteristics variables. Hospital characteristics variables are hospital type, ownership, residence and the number of usable beds, and patient characteristics variables are gender, age, severity, type of anesthesia, main diagnosis, whether or not of anemia and insurance class. At the result of this study, it was found that hospital type, region, gender, age, severity, main diagnosis and whether or not of anemia were the factors that mostly affected the blood transfusion for knee arthroplasty. And hospital type, residence, gender, age, severity, type of anesthesia and whether of not of anemia were the factors that mostly affected the blood transfusion for hip arthroplasty. In addition to that, it is expected that this research which analyzed the present state of blood transfusion and its influence factors are cost effective, and would make a good use of preliminary data for good quality of medical service.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.3
• /
• pp.200-207
• /
• 2021

Periprosthetic femoral fractures remain as one of the most challenging complications following total hip arthroplasty. A thorough clinical and radiographic evaluation, precise classification, and understanding of modern management principles are essential to obtain optimal results for these fractures. The Vancouver classification system is a simple, effective, and reproducible method for the planning treatments of these injuries. The fractures associated with a stable femoral stem can be treated effectively with osteosynthesis, but periprosthetic femoral fractures associated with a loose stem require revision arthroplasty. This paper describes the principle of the treatment of patients with periprosthetic femoral fractures and how to assess the stability of the femoral stem.

• Hip & pelvis
• /
• v.36 no.2
• /
• pp.120-128
• /
• 2024

Purpose: The purpose of this study was to compare the clinical and radiographic outcomes with use of short-curved stems versus standard-length single wedged stems over a minimum follow-up period of five years. Materials and Methods: A retrospective study of primary total hip arthroplasties performed using the Fitmore^® stem (127 hips, 122 patients) and the M/L taper^® stem (195 hips, 187 patients) between October 2012 and June 2014 was conducted. The clinical and radiographic outcomes were obtained for evaluation over a minimum follow-up period of five years. Results: In both the Fitmore^® and M/L taper^® groups, the mean Harris hip score improved from 52.4 and 48.9 preoperatively to 93.3 and 94.5 at the final follow-up, respectively (P=0.980). The mean Western Ontario and McMaster Universities Osteoarthritis Index scores also improved from 73.3 and 76.8 preoperatively to 22.9 and 25.6 at the final follow-up, respectively (P=0.465). Fifteen hips (Fitmore^®: 14 hips; M/L taper^®: one hip, P<0.001) developed intraoperative cracks and were treated simultaneously with cerclage wiring. Radiography showed a radiolucent line in 24 hips in the Fitmore^® group and 12 hips in the M/L taper^® group (P=0.125). Cortical hypertrophy was detected in 29 hips (Fitmore^® group: 28 hips; M/L taper^® group: one hip, P<0.001). Conclusion: Similarly favorable clinical and radiographic outcomes were achieved with use of both short-curved stems and standard-length single wedged stems. However, higher cortical hypertrophy and a higher rate of femoral crack were observed with use of Fitmore^® stems.

• 대한근관절건강학회:학술대회논문집
• /
• 1998.04a
• /
• pp.132-134
• /
• 1998

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.130-130
• /
• 2005