• International Journal of Highway Engineering
• /
• v.19 no.5
• /
• pp.153-162
• /
• 2017

PURPOSES : This study was conducted to analyze the effects arising from extending the duration of nighttime road construction on improving road quality and durability. METHODS : Most previous studies estimating the social cost of various construction conditions did not consider road pavement cooling time as a factor in improving road pavement quality. This study investigated the feasibility of achieving higher road quality and durability by extending the duration of nighttime road construction time extension. For this investigation, the effects of such an extension on traffic conditions were analyzed based on micro-simulation studies and scenario-based cost-benefit analyses, using factors including traffic volume, delay, construction cost, and road pavement cooling time. RESULTS : The results of the traffic simulation studies and cost-benefit analyses indicate that the current road construction method that emphasizes completing nighttime road construction by 6 a.m. reduces pavement life while causing relatively little traffic delay. If the night construction time is instead extended to 2 p.m., road pavement lifetime is increased, reducing road re-construction cost. These savings are greater than the cost of congestion arising from extending the duration of nighttime construction. CONCLUSIONS : The current nighttime construction durations need to be extended in order to efficiently manage roads and reduce road management costs.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.55-64
• /
• 2003

This research is about executing the suitability evaluation of the data through wireless communication system in comparison with the data through the wire system used in National Highway Traffic Management System. The communication system for the evaluation was established on Peoyngteak-Anjung section(about 19 Km) at Route 38 in southern National Highway of the National Capital region where image detectors with the communication by wire were set up. In the situation, the comparison of the data transmission rates between the wire system and the proposed system was accomplished. Before we evaluate the possibility of application about the proposed system, the elements of wireless systems performed the spot investigations. Traffic data transmission test among the equipments was accomplished on the section of the Route 38 where wireless communication equipments were set up. And then, the test of traffic data transmission between the field equipment and the data collective center of wireless communication system was carried out. It evaluated the reliability of wireless communication data for the suitability evaluation of cable/wireless data collected while 73 days.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.229-236
• /
• 2020

As the number of elderly drivers increases, traffic accidents from the elderly also increase. In particular, the emergency situation of the elderly driver is not transmitted to the following vehicle during cloudy days and night highway accidents, so it is extended to the second and third accidents, leaving serious aftereffects. Therefore, there is an urgent need to establish an economic and effective inter-vehicle emergency communication system between the accident vehicle of the elderly and the following vehicles. In this paper, we have proposed a policy and method that can take advantage of the special emergency light pattern of an elderly driver in an emergency and transmit it to the following vehicles, thereby providing secondary accident prevention and emergency relief. Furthermore, by introducing an infrared emergency communication system between vehicles using red brake lights and implementing it as a prototype of RC-Car, we have checked the feasibility of the system.

• International Journal of Highway Engineering
• /
• v.17 no.1
• /
• pp.91-98
• /
• 2015

PURPOSES : Although signalized intersections have been considered the best way to control traffic volume in urban areas for several decades, roundabouts are currently being discussed as an alternative way to control traffic volume, especially when traffic is light. Because a roundabout's efficiency depends on the load geometry as well as the traffic volume, design guidelines for roundabouts are recommended only if the incoming traffic volume is very low. It is rare to substitute a roundabout for an existing signalized intersection in urban areas. This study aims to estimate the benefits from the transformation of an existing signalized intersection into a roundabout in an urban area. When there is a more moderate volume of traffic, roundabouts can be effectively used by optimizing signals located at an approaching roadway. METHODS : The methodologies of this paper are as follows: First, a signalized intersection was analyzed to determine the traffic characteristics. Second, the signalized intersection was transformed into a roundabout using VISSIM microscopic traffic simulation. Then, we estimated and analyzed the effects and the performance of the roundabout. In addition, we adjusted a method to improve the benefits of the transformation via the optimization of signals located at an approaching road to control the incoming traffic volume. RESULTS : The results of this research are as follows: The signal-optimized roundabout improved delays compared with the signalized intersection during the morning peak hour, non-peak hour, and evening peak hour by 1.78%, 12.45%, and 12.72%, respectively. CONCLUSIONS : According to the simulation results of each scenarios, the signal-optimized roundabout had less delay time than the signalized intersection. If optimized signal control algorithms are installed in roundabouts in the future, this will lead to more efficient traffic management.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.159-167
• /
• 2014

PURPOSES : The purpose of this study is to analyze the requirements of the road traffic safety moderator robot when road repairing. The road traffic safety moderator robot is road traffic safety equipment and to conversions mechanical engineering and IT when road repairing. METHODS : The study used AHP based on the survey from road repair related expert that field engineers, design engineers, public officials and professors. The survey used paired comparison. The survey items were safety, convenience and economics. The safety is classified as visibility or efficiency, the convenience is classified as utility or mobility and the economics is classified as initial investment cost or maintenance $ management cost. The survey alternatives were the road traffic safety moderator robot, traffic regulation by human, traffic regulation by mannequin and traffic signs. The software for AHP is Expert Choice 2000. RESULTS : The results of AHP analyze, the weighted value of safety was analyzed with the highest at 0.488 of survey items. The weighted value of convenience was analyzed at 0.295, the weighted value of economics was analyzed at 0.218. The results of the road traffic safety moderator robot, the weight value of efficiency and utility were analyzed with the highest at 0.284 and 0.259 of alternatives. The weighted value of initial investment cost and maintenance & management cost were analyzed with the lowest at 0.203 and 0.211 of alternatives. The consistency test results of each items, null hypothesis is rejected because the CR values were 0.000 respectively. Therefore, the study results are consistency. CONCLUSIONS : The result of this study, overall value of the road traffic safety moderator robot came off second-best of other alternatives. The road traffic safety moderator robot has been received highest praise by the result of the study as good road traffic safety equipment when road repairing because the weighted values of efficiency and utility were analyzed with the highest of survey items. The efficiency mean securing safety and the utility mean practical assistance when road repairing. The results of this study showed that the road traffic safety moderator robot will effective for traffic safety when road repairing. economics and visibility are that supplementation of the road traffic safety moderator robot because the weighted values of economics and visibility were analyzed with the lowest of survey items. The consistency test results are consistency because the CR values were 0.000 respectively.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.17-28
• /
• 2010

A climbing lane is installed to separate low-speed traffic from high-speed traffic if drastic traffic capacity reduction is expected due to a large number of vehicles that slow down in the upward section. Existing studies on climbing lanes have focused on the designation, location of starting and ending points, and installation method of climbing lane with regard to road design standards. However, in terms of traffic operation, it was known that the climbing lanes cause traffic congestion due to the increase of traffic volumes. In this regard, this study aims to establish traffic operational guidance as to how much effects temporary closure of climbing lanes can have on traffic improvement according to the volume-capacity ratio, grade, and composition of trucks. A test section of simulated climbing lane was selected in Nakdong JC bound for Masan(136.9K~133.3K, 3.6km, 3.7%) on Jungbunaeryuk expressway to conduct VISSIM analyses, microscopic traffic simulation based on such control variables as traffic volume(v/c), grade and the trucks ratio. As a result of the analyses, it has been found that v/c and the ratio of trucks are the key variables for efficient traffic management of climbing lanes in order to relieve traffic congestion via climbing lane. If ratio of trucks are more than 50% and when v/c would be 0.8, both climbing lane would be closed and non-operated regardless of grade and ratio of trucks when v/c is 1.0. With the increased traffic due to a five-day work week system, continued peak hours during the weekday, increased and various patterns of congestion on expressway, this study would be expected to contribute to facilitating researches on flexible operational standards for road facilities.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.91-102
• /
• 1999

The objective of this study is to evaluate traffic management strategies using Variable Message Signs(MCS) on urban freeways. It is well known that real-time information on traffic conditions increases driver's comfort, and reduces the risks of accidents if drivers are aware of the traffic situation in advance, they decide whether to divert from the freeway or continue on the planned route. The experimental data collected on the Olympic highway we have shown the following results : 1. when the information on both the congested freeway and uncontested diversion route is displayed on the variable message sign. an additional 1.7 percent of traffic diverted, which results in a 3.7 percent reduction in total travel time. 2 Compared with one Proposed VMS message of 'reduce the speed', the other Proposed VMS message of 'keep speed 70km/h' is found to be much more effective in reducing mean speed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.23-30
• /
• 2006

The variation in the traffic volume on any given roads is the reflection of its user's economic activities and life patterns. And traffic volume flows in every hour usually take different charateristics depending on the location and the function of the roads. This study produced the Monthly Adjustment Factor, Weekly Adjustment Factor and Design hourly Factor, each of which is the index indicating the traffic volume charaterirstics on the highways leading to the recreation areas in the mountainous and seaside tourist sites. Applying these results, it might be possible to calculate the optimal AADT (Annual Average Daily Traffic) and DHV (Design Hour Volume), also be a help to establish a traffic management policy. Finally, it hopes to promote new version of KHCM (Korea Highway Capacity Manual) which includes traffic volume characteristics on recreation areas.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.563-572
• /
• 2007

Transportation infrastructure is critical to economic growth of a country such as China. Careful evaluation of investments in traffic infrastructure projects is therefore pertinent. As traditional evaluation methods do not consider the uncertainty of future cash flows and mobility during project execution, the real option approach is gradually gaining recognition in the context of valuing construction and infrastructure projects. However, many of the cases only evaluate individual options separately although multiple options often exist in a typical large infrastructure project. Using a highway project in China as a case study, this paper first evaluates a deferment option and a growth option embedded in the project. Subsequently, the values are combined using the fuzzy analytical hierarchy process. It is found that the combined value is less than the sum of the two option values. This finding is consistent with the theoretical observations given in past real option literature despite the use of a different approach.

• Journal of Korean Society of Transportation
• /
• v.4 no.1
• /
• pp.3-11
• /
• 1986

One important element of a systematic approach to the management and control of the flow of people over an urban street network is the monitoring and evaluation of system performance. The nature of TSM strategies that, in part, differentiates them from traditional long-range transportation improvement alternatives is that they are less costly, are more quickly implemented and modified, and are often oriented toward sub-area problems which must be addressed at a more microscopic level of analysis. These factors suggest that pre-implementation evaluations of alternative TSM actions will often have to rely on quick-turn around, manual methods of analysis to guide the choice of which management action should be implemented. This paper was prepared to focus on the definition and importance of TSM, specifically associated with monitoring and evaluating traffic performance in the context of TSM startegies. A simple case study of reversible lane technique was presented. The purposes of the case study is to illustrate the methodology of evaluating TSM strategies and demonstrate to identify the benefit from the reversible lane technique, which may otherwise be overlooked in real world. Applying the reversible lane technique to Sam-Il elevate highway, it was found to be a very promising low cost alternative to reduce total travel time(or delay) and fuel consumption.