• Bulletin of the Korean Chemical Society
• /
• 제24권4호
• /
• pp.489-493
• /
• 2003

2-Mercaptobenzothiazole was used as a highly selective and efficient carrier for the uphill transport of silver ion through a chloroform bulk liquid membrane. In the presence of thiosulfate ion as a suitable metal ion acceptor in the receiving phase, the amount of silver transported across the liquid membrane after 180 min was 90 ± 3.0%. The selectivity and efficiency of silver ion transported from aqueous solutions containing equimolar mixtures of $Zn^{2+}, Cu^{2+}, Co^{2+}, Ni^{2+}, Cd^{2+}, Pb^{2+}, Bi^{3+}, Fe^{2+}, Fe^{3+}, Pd^{2+}, Mn^{2+}, Hg^{2+}, Sn^{2+}, Ca^{2+}, Mg^{2+}, K^+, Na^+ and Li^+$ were investigated.

• ETRI Journal
• /
• 제40권3호
• /
• pp.303-308
• /
• 2018

This paper proposes a simple yet accurate method for estimating the antenna correlation coefficient (ACC) of a high-order multiple-input multiple-output (MIMO) antenna. The conventional method employed to obtain the ACC from three-dimensional radiation patterns is costly and difficult to measure. An alternate method is to use the S-parameters, which can be easily measured using a network analyzer. However, this method assumes that the antennas are highly efficient, and it is therefore not suitable for lossy MIMO antenna arrays. To overcome this limitation, we define and utilize the non-coupled radiation efficiency in the S-parameter-based ACC formula. The accuracy of the proposed method is verified by the simulation results of a 4-port highly coupled lossy MIMO array. Further, the proposed method can be applied to N-port arrays by expanding the calculation matrix.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1516-1521
• /
• 2004

Mixing in Y-channel micro mixer is analyzed through computational fluid dynamics. In the case of passive mixing, we investigate the effect of geometric parameters on the mixing efficiency, such as shape of throttling geometry and angle between two inlets. Mixing performance improves as two fluids join not just horizontally but both vertically and horizontally, and it also improves when channel follows throttling shapes. A numerical results substantiate the highly efficient mixing performance. It is highly beneficial to fabrication process since the proposed throttling geometry is simple, but allows high mixing ratio.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제12권4호
• /
• pp.259-270
• /
• 2008

The change of the developed countries to highly technological societies continuously requires that they nurture and use the full potential of mathematically and scientifically talented people. As this is a process that should start early in order to be efficient, the main responsibility of identifying and addressing the specific needs of these people is assigned to public school systems and, in particular, to elementary teachers. In this regard, three significant areas of concern arise and are discussed in this paper: (a) The complexity in identifying mathematically promising and mathematically talented elementary students; (b) The highly responsible and difficult task for elementary teachers to differentiate and serve the mathematically promising students within an inclusive classroom; and (c) The need of teachers with specialized training and mathematics knowledge in pre-high school grades. The last one should be considered predominantly as a logical consequence of the first two. The main goal and, hence, the purpose of the paper is to promote understanding of this crucial necessity of mathematics specialists and to advocate for a change in this direction.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제6권1호
• /
• pp.1-9
• /
• 2003

The silkworm, Bombyx mori, is prone to infection of various pathogenic organisms. Pebrine, one of the deadliest disease of silkworm caused by highly virulent parasitic microsporidian, Nosema bombycis has been understood since long. Infections of the disease range from chronic to highly virulent and can result in complete loss to the sericulture industry. Several strains and species of microsporidians have since been isolated from the infected silkworms; the disease is becoming increasingly more and more complex. Epizootiology, development of immunodiagnostic kit, use of chemotherapy and thermotherapy techniques has been addressed for identification and control of the disease. A technique of delayed mother moth examination, which plays a decisive role in the detection of the disease and harvestation of stable cocoon crop, has been described. An attempt has been made to review briefly the literature available on various aspects of the pebrine disease in order to develop efficient model(s) for the prevention and control of the disease and to suggest future avenues of investigation in the field of pebrine disease management.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.13.1-13.1
• /
• 2011

Photoelectrochemical solar cells such as dye-sensitized cells (DSSCs), which exhibit high performance and are cost-effective, provide an alternative to conventional p-n junction photovoltaic devices. However, the efficiency of such cells plateaus at 11~12%, in contrast to their theoretical value of 33%. The majority of research has focused on improving energy conversion efficiency of DSSC by controlling nanostructure and exploiting new materials in photoelectrode consisting of semiconducting oxide nanoparticles and a transparent conducting oxide electrode (TCO) [1-5]. In this presentation, we introduce inverse opal-based scattering layers containing highly crystalline anatase nanoparticles and their feasibility for use as bi-functional light scattering layer is discussed in terms of optical reflectance and charge generation properties as a function of optical wavelength. A new ITO nanowire-based photoelecrode is also introduced and its unique charge collection property is presented, demonstrating potential use for highly efficient charge collection in DSSC.

• 대한기계학회논문집A
• /
• 제33권9호
• /
• pp.870-877
• /
• 2009

This study provides how the Dimension Reduction (DR) method as an efficient technique for reliability analysis can acquire its increased efficiency when it is applied to highly nonlinear problems. In the highly nonlinear engineering systems, 4N+1 (N: number of random variables) sampling is generally recognized to be appropriate. However, there exists uncertainty concerning the standard for judgment of non-linearity of the system as well as possibility of diverse degrees of non-linearity according to each of the random variables. In this regard, this study judged the linearity individually on each random variable after 2N+1 sampling. If high non-linearity appeared, 2 additional sampling was administered on each random variable to apply the DR method. The applications of the proposed sampling to the examples produced the constant results with increased efficiency.

• 한국미생물·생명공학회지
• /
• 제32권3호
• /
• pp.282-285
• /
• 2004

The polyene antibiotics including nystatin, pimaricin, amphotericin and candicidin are a family of most promising antifungal polyketide compounds, typically produced by rare actinomycetes species. The biosynthetic gene clusters for these polyenes have been previously investigated, revealing the presence of highly homologous biosynthetic genes among polyene-producers such as polyketide synthase (PKS) and cytochrome P450 hydroxylase (CYP) genes. Based on amino acid sequence alignment among actinomycetes CYP genes, the highly-conserved regions specific for only polyene CYP genes were identified and chosen for degenerate PCR primers, followed by the PCR-screening with various actinomycetes genomic DNAs. Among tested several polyene non-producing actinomycetes strains, Pseudonorcardia autotrophica strain was selected based on the presence of PCR product with polyene-specific CYP gene primers, and then confirmed to contain a cryptic novel polyene hydroxylase gene in the chromosome. These results suggest that the polyene-specific hydroxylase gene PCR should be an efficient way of screening and isolating potentially-valuable cryptic polyene antibiotic biosynthetic genes from various microorganisms including rare actinomycetes.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.252-257
• /
• 2010

The availability of the thermal energy has been deeply recognized recently to encourage the cascade usage of thermal energy from combustion. Within the frame work, a 1 kW class Stirling engine based cogeneration system has been proposed for a unit of a distributed energy system. The capacity has been designed to be adequate for the domestic usage, which requires high compactness as well as low emission and noised. To develop a highly efficient system with satisfying these requirements, a premixed slot flame burner has been proposed and a series of numerical simulation has been performed to establish a design tool for the combustion chamber. The thermal radiation model has been found to highly affect the computational results and a proper resolution to analyze the heat transfer characteristics of the high temperature heat exchanger. Finally, the combustion characteristics of the premixed flame with the metal fiber type burner has been studied.

• 한국환경과학회지
• /
• 제18권10호
• /
• pp.1071-1077
• /
• 2009

A novel pretreatment technique was applied to the conventional Pt/alumina catalyst to prepare for the highly efficient catalyst for the preferential oxidation of carbon monoxide in hydrogen-rich condition. Their performance was investigated by selective CO oxidation reaction. CO conversion with the oxygen-treated Pt/Alumina catalyst increased remarkably especially at the low temperature below $100^{\circ}C$. This result is promising for the normal operation of the proton exchange membrane fuel cell (PEMFC) without CO poisoning of the anode catalyst. XRD analysis results showed that metallic Pt peaks were not observed for the oxygen-treated catalyst. This implies that well dispersed small Pt particles exist on the catalyst. This result was continued by high resolution transmission electron microscopy (HRTEM) analysis. Consequently, it can be concluded that highly dispersed Pt nanoparticles could be prepared by the novel pretreatment technique and thus, CO conversion could be increased considerably especially at the low temperatures below $100^{\circ}C$.