• 한국분말재료학회지
• /
• 제27권5호
• /
• pp.381-387
• /
• 2020

In this work, TiO₂ 3D nanostructures (TF30) were prepared via a facile wet chemical process using ammonium hexafluorotitanate. The synthesized 3D TiO₂ nanostructures exhibited well-defined crystalline and hierarchical structures assembled from TiO₂ nanorods with different thicknesses and diameters, which comprised numerous small beads. Moreover, the maximum specific surface area of TiO₂ 3D nanostructures was observed to be 191 ㎡g^-1, with concentration of F ions on the surface being 2 at%. The TiO₂ 3D nanostructures were tested as photocatalysts under UV irradiation using Rhodamine B solution in order to determine their photocatalytic performance. The TiO₂ 3D nanostructures showed a higher photocatalytic activity than that of the other TiO₂ samples, which was likely associated with the combined effects of a high crystallinity, unique features of the hierarchical structure, a high specific surface area, and the advantage of adsorbing F ions.

• 공업화학
• /
• 제10권2호
• /
• pp.212-217
• /
• 1999

기체투과 특성을 관찰하기 위해 양극산화에 의해 세공직경의 크기가 서로 다른 상부층과 하부층으로 이루어진 이중기하구조의 다공성 알루미나막을 제조하였다. 양극산화는 황산 전해질 하에서 직류에 의한 정전류법으로 행하였으며, 양질의 막을 얻기 위해 열산화, 화학연마, 전해연마 등의 전처리를 한 후 양극산화를 행하였다. 양극산화에 의한 알루미나 막의 제조에서 세공직경은 전해질의 종류 및 농도, 전해 온도, 전류밀도 등에 의존하는데, 전류밀도를 극도로 낮추어 세공직경이 20 nm 이하인 상부층을 제조하고 전류밀도를 높여서 세공직경이 36 nm인 하부층을 제조하였다. 막의 두께는 전기량에 의해 조절되어 상부층의 두께는 약 $6{\mu}m$이었으며 하부층을 포함하는 막의 총 두께는 약 $80{\sim}90{\mu}m$로 제조되었다. 제조된 막은 가압법에 의한 기체투과 실험을 행하였다. 제조된 막의 기체투과 기구는 Knudsen 흐름을 따르는 것을 확인하였다.

• 공업화학
• /
• 제18권6호
• /
• pp.537-544
• /
• 2007

본 연구는 흡착제를 이용하여 잔류농약의 흡착특성을 살펴보았다. 흡착제는 $bauxsol^{TM}$과 맥반석을 사용하였다. 잔류농약의 분석은 GC/NPD와 $GC/{\mu}ECD$로 분석하였다. 실험에 사용된 농약은 ${\alpha}$-endosulfan, ${\beta}$-endosulfan, pendimethalin, chlorpyrifos-methyl, fenitrothion이고 회수율은 97% 이상으로 나타났다. $Bauxsol^{TM}$과 맥반석 흡착제의 흡착율은 endosulfan, chlorpyrifosmethyl, pendimethalin, fenitrothion의 내림차순으로 나타났고, 상대적으로 유기염소계 농약이 다른 농약에 비해 높은 제거율을 보여주었다. $Bauxsol^{TM}$은 농약의 화학적 분해와 물리흡착이 동시에 발생하였고, 맥반석은 물리흡착만이 발생하였다. 흡착제 용출액의 높은 pH와 농약구조의 염소이온은 화학적 분해에 많은 영향을 주었다. 흡착제의 물리흡착은 광물의 많은 다공성에 의해 농약 제거율을 높여 주었다. 흡착제는 골프장의 연못 등 수질에 잔류농약제거 가능성을 보여주었다.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.469-481
• /
• 1993

The purpose of this study was to achieve the reduction of the galvanic current between the dental amalgam alloy and gold alloy. In order to measure the galvanic current between these two metals a prep in the size of $4{\times}13mm$ which was filled with amalgam and another prep of $4{\times}2mm$ was filled with gold alloy was made in the acrylic resin. These two preps were then connected to a 2mm diameter copper wire. Using an ammeter to measure the galvanic current, six different kinds of amalgam and gold alloy were immersed in saline solution with approximately 10mm distance between the two alloys. Chemical agents that are thought to reduce the galvanic current such as hydrazine. silver nitrate, potassium chromate, and bonding agents such as Scotch bond 2(3M) and All bond 2(Bisco) were applied to the alloy surface. Cathodic inhibitor such as hydrazine was applied to gold alloy where as anodic inhibitor such as silver nitrate and potassium chromate were applied to amalgam. Both bonding agents, Scotch bond 2(3M) and All bond 2 (Bisco), were applied to amalgam. The following results were obtained when the currency on the coated alloy surface was compared to the uncoated surface. 1. The galvanic currency went down as the time elapsed and after 30 minutes no change was detected. 2. Initial currency was higher in low copper amalgam compared to high copper amalgam. Intitial currency was the highest in low copper lathe-cut amalgam. 3. Group of gold coated with hydrazine had the most reduction in galvanic currency. 4. Group of amalgam coated with silver nitrate or potassium chromate also showed significant reduction in galvanic currency. 5. The bonding agents also helped reduce galvanic currency. 6. Of all the agents used to reduce galvanic currency, silver nitrate showed the best result.

• 한국수정란이식학회지
• /
• 제13권1호
• /
• pp.1-9
• /
• 1998

In order to improve the cryopreservation by vitrification or slow freezing of nuclear transplant rabbit embryos, the effects of factors affecting embryo cryopreservation such as cryoprotectants, equilibration, cooling rate and post-thaw dilution on post-thaw survial and development were determined using intact embryos of morular stage. And the post-thaw development of nuclear transplanted embryos cryopreserved under the optimal conditions examined was compared between vitrification and slow freezing. The cryoprotectant solution used was ethyleneglycol-ficoll-sucrose (EFS) or ethyleneglycol-poly-vinylpyrrolidone-galactose- I (EPG- I ) for vitrification, and EPG- II for slow freezing. To examine the viability of frozen-thawed embryos, the nuclear transplanted embryos were co-cultured in TCM-199 plus 10% FBS with bovine oviduct epithelial cells(BOEC) for 24 hrs and the intact morulae were co-cultured with BOEC for 5 days and 3 days to hatching blastocyst stage in 39 ˚C 5% $CO_2$ incubator. The results obtained were as follows: Following vitrification with EFS, the post-thaw development of rabbit morulae to hatching blastocyst was significantly(P<0.05) higher in compacted stage(82.4%) than in early morular stage(60.0%). The post-thaw development of compacted morulae to hatching blastocyst was similarly high in vitrification with EFS(82.4%), EPG- I (85.0%) and in slow freezing with EPG- II (83.3%). Following vitrification with EPG- I, the post-thaw development of intact rabbit morulae to hatching blastocyst was similar as 78.0% and 85.0% in 1-step and 2-step post-thaw dilution, respectively. The post-thaw development of nuclear transplanted rabbit embryos of compacted morulae stage to hatching blastocyst was similarly 43.6% and 40.0% in vitrification with EPG- Iand slow freezing with EPG- II, respectively. These results indicated that the rabbit nuclear transplant and intact embryos of morulae stage could be well cryopreserved with either vitrification or slow freezing procedure.

• 한국식품저장유통학회지
• /
• 제24권4호
• /
• pp.529-535
• /
• 2017

Rapeseed cake was extracted with 80% ethanol and then fractionated with $H_2O$ (fraction I) as well as with 30% (II), 50% (III), 70% (IV), and 100% ethanol (V). Total phenolic content (TPC), 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, ferric-reducing antioxidant potential, and Trolox equivalent antioxidant capacity were in the order of fractions II > III > I > IV > V. The three fractions with high antioxidant activities and TPC (I, II, and III) were pooled and hydrolyzed by NaOH solution, resulting in 18.97 mg sinapic acid/g hydrolyzed extract and 21- and 2.2-fold increases in TPC and DPPH radical scavenging activity, respectively. Hydrolyzed rapeseed cake extracts (200, 500, and 1,000 ppm) and catechin (200 ppm) as a comparison were added to 10% fish oil-in-water emulsion, and their effects on oxidative stability were investigated by measuring hydroperoxide values (PV) during refrigerated storage. PVs were significantly lower in the emulsions with added hydrolyzed extract as compared to the control (p<0.05) and significantly decreased with increasing extract concentration (p<0.05) over a period of 29 days. The emulsion added with hydrolyzed extract showed higher PV than that added catechin at the same concentration (200 ppm) during 13-22 days (p<0.05), but after then, the PV was not significantly different (p>0.05). This study indicates that hydrolyzed rapeseed cake extract rich in sinapic acid may inhibit oxidation in a fish oil-in-water emulsion in a concentration-dependent manner.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.73-73
• /
• 2012

Modern technology-driven society largely relies on hybrid electric vehicles or electric vehicles for eco-friendly transportation and the use of high technology devices. Lithium rechargeable batteries are the most promising power sources because of its high energy density but still have a challenge. Graphite is the most widely used anode material in the field of lithium rechargeable batteries due to its many advantages such as good cyclic performances, and high charge/discharge efficiency in the initial cycle. However, it has an important safety issue associated with the dendritic lithium growth on the anode surface at high charging current because the conventional graphite approaches almost 0 V vs $Li/Li^+$ at the end of lithium insertion. Therefore, a fundamental solution is to use an electrochemical redox couple with higher equilibrium potentials, which suppresses lithium metal formation on the anode surface. Among the candidates, $Li_4Ti_5O_{12}$ is a very interesting intercalation compound with safe operation, high rate capability, no volume change, and excellent cycleability. But the insulating character of $Li_4Ti_5O_{12}$ has raised concerns about its electrochemical performance. The initial insulating character associated with Ti4+ in $Li_4Ti_5O_{12}$ limits the electronic transfer between particles and to the external circuit, thereby worsening its high rate performance. In order to overcome these weak points, several alternative synthetic methods are highly required. Hence, in this presentation, novel ways using a synergetic strategy based on 1D architecture and surface coating will be introduced to enhance the kinetic property of Ti-based electrode. In addition, first-principle calculation will prove its significance to design Ti-based electrode for the most optimized electrochemical performance.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1356-1364
• /
• 1990

본 연구에서는 단열해석에 재생기효율을 고려함으로써 보다 합리적인 예비설 계조건을 도출하고자 함이다. 스터링기관용 재생기의 특성검토를 통하여 예비설계에 적합한 재생기효율을 정립하며, 기 발표된 단열모델에 대한 해석적 근사해에 적용하는 방법으로 접근한다. 재생기효율이 고려될 경우 기관의 기본형태와 연관된 위상각, 행정체적비, 불용체적비, 압축비등 설계인자의 최적조건에 관하여 취급하며 온도비, 비열비등 부여조건의 변화에 따른 영향을 검토한다.

• Journal of Pharmaceutical Investigation
• /
• 제40권6호
• /
• pp.353-356
• /
• 2010

Although liposomes have been applied as drug delivery systems in various fields, the usage was limited due to the low encapsulation efficiency compared to other carrier systems. Here, cationic liposomes were prepared by mixing 1,2-dioleoyl-3-trimethylammoniopropane (DOTAP) as a cationic lipid, 1,2-dioleoyl-sn-glycerol-phosphoethanolamine (DOPE) and cholesterol (CH), and the liposomes were hydrated by varying the aqueous phases such as phosphate-buffered saline (PBS), 5% dextrose, and 10% sucrose in order to improve the encapsulation efficiency of bovine serum albumin (BSA). The particle size and zeta potential were determined by dynamic light scattering method and in vitro release patterns were investigated by spectrophotometry. Particle size and zeta potential of liposomes were varied depending on the ratio of DOTAP/DOPE/CH in range of 270-350 nm and 0.8-9.7 mV, respectively. Moreover, the addition of polyethylene glycol (PEG) improved the encapsulation efficiency from 37% to 43% as well as reduced particle sizes of liposomes while the liposomes were hydrated in PBS. When the liposomes were hydrated with 10% sucrose, the encapsulation efficiency of BSA was higher than any other groups. Whereas PBS was used as hydration solution, lower encapsulation efficiency was obtained compared with other groups. More than 60% of BSA was released from the liposomes hydrated with 10% sucrose; thereafter another 20% of BSA was released. Therefore, release pattern of BSA from cationic liposomes was extended release in this study. From the results, cationic liposomes dispersed in 10% sucrose would be potential carrier with high encapsulation efficiency.

• 대한전자공학회논문지SP
• /
• 제49권2호
• /
• pp.69-75
• /
• 2012

본 논문은 MAP (maximum a posterior) 예측기에 기반하여 움직임 보상 예측 오차를 보정해주는 방식의 순차주사화 (de-interlacing) 알고리즘을 제안한다. 먼저, 현재 필드와 인접한 필드 간의 적절한 정합 (registration)을 수행 한 후, 계산된 정합 정보에 기반한 MAP 예측기를 통해 현재 필드에 대응하는 순차 주사 (progressive) 프레임을 찾아낸다. 안정적인 결과를 얻기 위하여 잘 알려진 BTV (bilateral total variation) 기반의 평활화 (regularization) 과정이 추가된다. 한편, 잘못된 정합 정보로 인한 소위 깃털 현상 (feathering artifact)을 억제하기 위하여 블록 단위로 깃털 현상 발생 여부를 판단하여 발생되었다고 판단된 블록 영역에 대해서는 앞서 설명한 MAP기반 순차주사화 대신 에지 방향성에 기반한 공간적 순차주사화를 적용한다. 실험 결과에 따르면, 제안된 기법은 종래 기법들에 비하여 평균 약 4dB의 PSNR 성능 개선을 보이고 있으며, 우수한 주관적 화질을 보여주고 있다.