• 한국의류산업학회지
• /
• 제24권4호
• /
• pp.471-478
• /
• 2022

In roadside workplaces, more attention should be paid to the safety of workers. The roadside workers underestimate the effect of the brightness of their clothes and judge that drivers will recognize them easily, and the drivers misjudge that the roadside workers are far away and that the vehicle can be stopped in sufficient time. Therefore, customized safety education reflecting this and wearing work clothes with certified visibility functions are required. In Korea, it is not compulsory for roadside workers and vehicle guide attendants to wear work clothes with a visibility function. In this study, the distance ahead perceived by drivers was measured using manikins wearing certified and non-certified reflective safety vests. The perception distance of the non-certified reflective safety vest was 1.4 times longer than that of the certified reflective safety vest, thus confirming the importance of wearing a certified reflective safety vest. To prevent roadside workers from suffering traffic accidents, we propose the enactment of a law that makes it mandatory for them to wear high-visibility safety clothing. Specifically, Article 32 of the Enforcement Regulation of the Road Traffic Act should include high-visibility safety clothing in life protection equipment, and additionally, to prevent secondary accidents, we propose the enactment of a law requiring the installation and wearing of certified reflective safety vests in vehicles.

• Human Ecology Research
• /
• 제61권3호
• /
• pp.493-503
• /
• 2023

Since ISO 20471 regulations(2013) were enacted, high-visibility clothing made of fluorescent fabric and retroreflective materials has been standardized to distinguish the wearers from the surrounding background in a dark place and to protect them. Accordingly, we made high-visibility safety clothing based on the international standards, and examined the positions of the retro-reflective materials on the attached sites to evaluate the suitability of the positions, by 3 types of safety clothing and the body regions when the wearers work or move. Two retro-reflective films of 5cm-horizontal lines were attached to the front/back of the upper-wear, and the lower-wear. Vertical lines were attached from the shoulder to the horizontal waistline. To analyze the motion in 3-dimension, we took pictured infrared-reflective markers on the retro-reflective film covered with yellow-tape on the front-side when 6 subjects wearing experimental garments performed 6 types of motions. According to the metronome tempo, the motions were performed for 30 seconds and repeated 6 motions ①~⑥ by 3 experimental clothing. Among the 6 motions, significant differences in the appearance rate of the markers by body region during the motions were found in 5 types except for motion ③. Significant differences by the post-hoc test were shown in motions ④ and ⑥ as well. Therefore, for high-visibility safety clothing, it is necessary to anticipate the worker's motion and consider the attaching position of the retro-reflective material. It is considered desirable to attach the retro-reflective materials to several places where the clothing is hard to wrinkle.

• Human Ecology Research
• /
• 제59권1호
• /
• pp.83-97
• /
• 2021

This study developed safety clothing that is essential for adolescent to protect their bodies from accidents, pursue activities and individuality. Therefore, the developed safety clothing was first based on international standards, while changing design to emphasize creativity, activity, and functionality. Two suits of boy's clothes and a girl's suit were developed as safety clothing for sportswear, along with two pairs of girl's clothes and a pair of boy's clothes for entertainment. It was confirmed that the difference in visibility was revealed by testing under different lighting conditions. Second, the survey on adolescents indicated no significant gender difference in sportswear. Round shirt+shorts for both boys and girls were the most preferred for ball game sportswear. However, there was a significant difference by gender in the design of safety clothing for entertainment. Male students preferred jump suit=cape+pants the most, and female students preferred jump suit>cape+pants in the order (p<0.05). In the safety clothes with the highest preference for entertainment, there was no gender difference. All students preferred the jump suit at the most. Checking at each school level, it was found that both middle and high school students preferred jump suit designs, and in safety clothing, middle school students preferred high-neck shirt blouse+tight skirt, and high school students preferred jump suits. Third, 35.5% responded that they would wear it more if current safety clothing is improved. This indicated the necessity of developing various safety clothing for adolescence.

• 감성과학
• /
• 제26권2호
• /
• pp.129-140
• /
• 2023

본 연구에서는 첫째, 국제표준에서 규정한 형광직물과 재귀반사 소재에, 아동들이 선호하는 동물의 문양을 재귀반사 필름과 검정색 직물로 디자인하여 부착한, 2벌의 안전의복과 안전조끼를 제작하였다. 둘째, 야간에 주변광원이 없어도 원거리에서 생체를 인지할 수 있도록 안전의복에 스마트 포토닉 디바이스를 장착함으로써, 어린이들이 어두운 때 버튼 원터치만으로 상황에 따라 3가지 발광이 가능하도록 구현하였다. 제작한 스마트 안전의복을 마네킹에 착용시켜 주야간의 시인성을 비교한 결과, 시인성의 차이가 야간에 확연히 나타났는데, 기존의 안전의복 착용 시에는 주변광원 없이는 착용자가 표출되지 않은 반면, 스마트 안전의복 착용 시는 약 70m의 원거리에서도 표출됨을 확인하였다. 따라서 야간이나 기상악화 시에 주행하는 운전자가 원거리에서 생체를 인지할 수 있어 교통사고나 도로상의 안전사고 예방에 기여할 것으로 기대된다. 셋째, 광섬유의 발광기능 안정성 유지와 발광시간의 연장을 위하여 에너지 소진 시 태양전지로 수확한 전기에너지를 사용함으로써, 장시간 안정되게 광섬유 발광이 가능하여 시인성의 안정성을 확인할 수 있었다. 이로써 스마트 포토닉 안전의복은 야간 작업자용으로도 활용 가능함이 증명되었다. 그러므로 광섬유 안전의복은 태양전지에 의한 에너지 하베스팅 적용으로 안정적인 충전에 의해 실생활뿐만 아니라 어두운 산업현장에서도 착용 가능성이 높을 것으로 기대된다.

• 패션비즈니스
• /
• 제18권6호
• /
• pp.174-187
• /
• 2014

This study intended to propose a guideline designed to secure safety by developing a functional color design for the color of the ordinary working clothes worn in the actual industrial settings of the machine industry in national industrial complexes in Korea. For this, a total of 6 sets of actual working clothes were produced for test, using 2-color arrangements with blue, of varying brightness and chroma for top and bottom, in relation to the visibility proven in preceding studies and evaluated in the machine industry. Blue was suggested the best proper color for machine industry by previous studies. For the material of working clothes, a total of 111 swatches were collected from the Dongdaemoon Fabric Market, and they were analyzed for color values. A total of 6 materials were used to produce working clothes for testing, which represented high brightness, medium brightness, low brightness, high chroma, medium chroma, and low chroma. Clothes were tried at the industrial settings for machine industry in a national industrial complex located in Gyeongsangnam-do and the expert satisfaction evaluation was performed based on items related with safety. As a result, higher satisfaction was shown when the brightness difference of top and bottom clothes was greater, and for chroma, relatively higher satisfaction appeared when the chroma of both top and bottom clothes was high. To secure satisfaction for both brightness and chroma, it is possible to deduce that the 2-color arrangement using the strong tone with high brightness and high chroma and the dark tone with somewhat low brightness and high chroma would be effective. Top and bottom clothes in the same color with high chroma had high visibility but had somewhat low evaluation for harmonious arrangements. This indicated that the arrangement of vivid colors for top-bottom clothes is inappropriate.

• 패션비즈니스
• /
• 제17권3호
• /
• pp.1-14
• /
• 2013

This study is about the evaluation of the color arrangements of working clothes that are harmonized with working environment and assist in the protection of workers in industrial sites. This study attempted color arrangement design with the intention of giving order to the colors of working environment and working clothes so as to help improve the safety of work and the management aspects including human resource management, efficiency improvement, and the practice of business ethics. The study method consisted of literature research, empirical research, and evaluation research. The literature research performed theoretical examination about colors, industrial safety, and visibility. Three actual outdoor work sites in the machine industry were chosen and pictures were taken at 20-30 m from workers. The background colors of the work environment of each work site and the colors of the working clothes that were actually worn were analyzed through color values measured with a color-difference meter(CR-400). As a result, it was found that between value and chroma which affect visibility, color arrangement based on differences in chroma could be a greater influence than color arrangement based on differences in value. The results of this study could assist the integration of color schemes among working environment colors, people and working clothes by suggesting color arrangements with improved visibility that are applicable to the working clothes of domestic machine manufacturers that are playing a pivotal role in domestic industries and by presenting appropriate guidelines.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.288-301
• /
• 2021

The purpose of this study was to verify the degree of visibility of FOLED (fiber optic light-emitting diode) materials applied to safety-enhancing clothes of micro-mobility users during the day and night by conducting an empirical test targeting 50 people in their teens, 20's, 30's, 40's, and 50's or older. First, the results of the visibility test at 10 m-intervals from 10 to 70 m based on the clothes sample showed that the light detection of FOLED material was very good without daytime or night-time distinction. Second, the results of directional sign detection of FOLED were confirmed to be very high without any daytime or night. Third, the results of identifying a pictogram design showed that the distance was shorter than that of light detection or directional indication. However, the FOLED pictogram design could be confirmed at a distance of 50 m or less. Therefore, if a clothes product using FOLED material is worn and micro-mobility is used, the experimental results indicate that safety will be sufficiently secured due to the excellent visibility.

• 복식문화연구
• /
• 제26권4호
• /
• pp.503-518
• /
• 2018

The purpose of this study is to illustrate the design of safety suits based on energy-harvesting technology, particularly targeting street cleaners who must work at night with high mobility. The design focuses on applying lightweight energy-harvesting tools and illuminant into the wear. The design development reflects feedback from testers collected via survey constituting a key methodology. The development process has two main stages. Each stage uses a process of design prototyping, internal examination, test sampling, test wearing, and wearers' feedback via survey that consists of questions on visibility, wearing convenience, and washability. The first stage results show the design of safety suits with energy-harvested LED illuminant inserted and the survey results collected from street cleaners dressed in 4 sample and 80 actual suits in total. Improved based on the first-stage survey results, the second stage designs the suits with detachable energy-harvested EL tape. From these 5 sample and 30 actual second-stage suits, the additional survey indicates that this second-stage design facilitates more visibility and convenience in washing and wearing than the first-stage design. Accordingly, one can expect that this new design can apply not only to safety suits for night workers but also to handicapped or outdoor sportswear applications in the future.

• 패션비즈니스
• /
• 제17권6호
• /
• pp.98-110
• /
• 2013

This research is to study the functional color arrangement of work clothes based on the color chroma value arrangement, which could affect the safety of workers at the site of the mechanical industry. For the study, 5PB hue, indicating a high satisfaction level with proper colors at the site of the mechanical industry, were selected from previous research for 6 types of CAD simulation on a 2-color chroma value arrangement. To analyze the color data of each color arrangement after applying the color chroma value arrangement as well as to figure out the level of recognition on the color arrangement, an analytical result, which was based on the NCS color system, was evaluated. Furthermore, the survey study on items regarding the safety of the relevant work site for the simulated result was executed. As a result of the evaluation, the color arrangements which include high color chroma value indicated a high satisfactory level in all items under the visibility criteria for the safety of workers, propriety as a color arrangement of work clothes, and safety from the perspective of work site management. In particular, the color arrangement mixture between high color chroma obtained the highest satisfactory evaluation, indicating that the color arrangement of high color chroma is essential in the color arrangement of work clothes for the establishment of safety by adjusting the color chroma value. Yet, in order to figure out the independent function of the color chroma value, other factors are restricted in this study. Thus, it is not proper to apply the result of this study only at the actual work site. Therefore, a follow-up research centered on the tones of all three types is proposed, from which we can expect, a suggestion of the applicable color guideline for the industrial site.

• 패션비즈니스
• /
• 제17권5호
• /
• pp.45-56
• /
• 2013

This study researches functional arrangements for colors of work clothes - concentrating on the arrangements of lightness - for safety protection of workers at the job sites in the mechanical industry. To conduct such study, blue color (5PB) is selected for the CAD simulations on six arrangements of brightness based on two colors. The brightness ranges are of 5PB color (between 3~7.5) which are measurable by Munsell Conversion, and arrangements on lightness consisting of one arrangement of high lightness-gap, two of medium lightness-gap, and three of low lightness-gap. To analyze the data of color values after applying arrangements of lightness and to evaluate the levels of awareness regarding arrangements, the NCS colorimetric is being applied. Color palettes are based on the NCS notations, and then marked with color triangles. After evaluation, the visibility proves to be high when the arrangements contain high lightness at the top and bottom, and the arrangements with higher lightness-gap show higher effects in safety. Since this study tends to check factors of lightness, the other color factors were limited. Therefore, in order to apply these results at the job sites, integrated applications of such results will be very useful for developing safe working clothes in the future.