• 한국환경농학회지
• /
• 제39권3호
• /
• pp.273-279
• /
• 2020

BACKGROUND: After transplanting, the recent abnormal low temperature caused physiological disorders of pepper seedlings. This study was conducted to evaluate the effects of UV-A LED, a physical elicitor, on the chilling tolerance of pepper seedlings. METHODS AND RESULTS: Seedlings were continuously irradiated with 370 and 385 nm UV-A LEDs with 30 W·m^-2 for 6 d. After that, seedlings were exposed to 4℃ for 6 h and then recovered under the normal growing condition for 2 d. There were no significant differences in growth characteristics of UV-A treatments compared to the control. Fv/Fm values of two UV-A treatments were below 0.8. Electrolyte leakage in the control was increased by chilling stress, while 385 nm UV-A had the significantly lowest value. Total phenolic content and antioxidant capacity of two UV-A treatments significantly increased due to UV-A radiation. However, total phenolic content and antioxidant capacity of the control increased due to chilling stress and tended to decrease again during the recovery time. CONCLUSION: We confirmed that UV-A light was effective to induce the chilling tolerance of pepper seedling, and the supplemental radiation of 385 nm UV-A LED before transplanting could be used as a cultivation technique to produce high quality pepper seedlings.

• 정보저장시스템학회논문집
• /
• 제6권1호
• /
• pp.12-17
• /
• 2010

Thermally-assisted magnetic recording (TAMR) is a potentially promising approach to increase the storage density of hard disk drive (HDD). However, TAMR has some issues such as temperature effects, media problems, thermal deformation and light delivery. In this research, we focused on light delivery. One of the powerful methods to deliver the light from laser diode to recording medium is the use of an optical fiber and a specially designed prism. However, the TAMR with optical fiber may have some flyability problems induced by the mounted optical fiber and prism. Also, the TAMR suspension using an optical fiber has high vertical and pitch stiffness. Therefore, p-torque is greatly increased by the optical fiber. Also, flying height (FH) of the slider with TAMR suspension can be largely changed by p-torque. Therefore, in this paper, we focus on the pitch static attitude (PSA) tolerance and the FH by PSA of the TAMR suspension. The FH is investigated using various errors and the PSA tolerance for TAMR suspension is proposed.

• 한방비만학회지
• /
• 제17권2호
• /
• pp.119-126
• /
• 2017

Objectives: This study investigated the effects of the mixed herbal extract from Cinnamomum cassia Blume, Atractylodes macrocephala Koidzumi, Pueraria lobata Benth, and Aconitum carmichaeli Debx (CAPA) on obesity and glucose tolerance in obese mice. Methods: Animals were divided in 6 groups, normal diet, high fat diet (HFD), HFD with CAPA 100 mg/kg (CAPA 100), CAPA 300 mg/kg (CAPA 300), and metformin 200 mg/kg or lorcaserin 10 mg/kg as positive controls, and treated for 16 weeks. Body weight, food intake, fasting blood glucose, and body temperature were checked every week and then organs, blood serums were collected after treatment. The oral glucose tolerance test was also carried out after treatment. Results: Compared to HFD, CAPA extract treated mice showed significant decreases in body weight, adipose tissue weight, lipid accumulations in liver and serum lipid levels without a reduction of food intake. And fasting glucose and glucose tolerance were all improved in the CAPA treated mice. Conclusions: Our results suggest that CAPA extract can prevent diet induced obesity and glucose intolerance without a reduction of energy intake in obese mice.

• Journal of Plant Biology
• /
• 제23권1호
• /
• pp.27-33
• /
• 1980

The germination character and the salt tolerance of seeds collected in a salt reclaimed area were studied. Twenty species of seeds out of 30 species collected were germinated under natural or continuous light conditions but only 16 species under dark condition. Germination percentage of seeds under dark was more decreased than those under other two conditions and speed of germination was accelerated at high temperature. It is clear that almost all the wild weeds were the light germinated seeds. The higher concentration of NaCl for germination inhibited to make the lower percentage and rate of germination. The germination curves of seeds treated with NaCl solution were classified into 3 different curves; a steeper, a parabola and intermediate. The critical concentrations of NaCl for germination were 2.3% for Brassica napus, 1.8% for Echinochloa hispidula, 1.5% for Setaria lutescens, 1.3% for Aster koraiensis, 0.7% for Bromus japonicus and 0.6% for Glyceria acutiflora.

• Journal of Pharmaceutical Investigation
• /
• 제30권1호
• /
• pp.47-50
• /
• 2000

A new technique has been developed for the preparation of Lactobacillus microcapsules to enhance the stability against high temperature, humidity, gastric acid and bile acid. Employing fluidized bed coating, primary sub-coating was processed in non-organic solvent system, so that Lactobacillus did not directly contact with organic solvent. Secondary enteric-coating was processed in organic solvent with low temperature $(below\;33^{\circ}C)$ technique, which minimized the heat labilability of Lactobacillus. Survival rate of Lactobacillus within microcapsule was not less than 95% and acid tolerance was above 30% in the artificial gastric acid. Further more it was dissolved in the artificial intestine juice within 2-3 hr. Average size of Lactobacillus microcapsules was $450\;{\mu}m$(25-50 mesh) and its viability was above 90% in the direct tableting.

• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.47-52
• /
• 2006

This studies were carried out in summer season to increase high temperature tolerance using hydrogen peroxide treatments on cucumber in greenhouse. The water stress of cucumber in greenhouse by the hydrogen peroxide treatments showed as control>250 mM>500 mM treatments in order. The photosynthesis rate of cucumber at $30^{\circ}C$ did not show difference with each hydrogen peroxide treatment in temperature controlled greenhouse. However, the photosynthesis rate of cucumber in the control and hydrogen peroxide treatments at $40^{\circ}C$ was significantly different. The photosynthesis rate of cucumber in combined treatment with 1,000 $mg{\cdot}L^{-1}\;CO_2$ supply and hydrogen peroxide was also higher than control, however, there was no different of photosynthesis in 250 mM and 500 mM treatment. The value of $F_v/F_m$ and $F_m/F_o$ of chlorophyll fluorescent in 500 mM hydrogen peroxide treatment at $40^{\circ}C$ was highest. Also the activity of POD, the antioxidant enzyme, was higher with high hydrogen peroxide concentration than the other treatments. The high temperature limits for growth were $43^{\circ}C$ in the control, $44^{\circ}C$ in the 250 mM and $46^{\circ}C$ in the 500 mM according to analyze chlorophyll fluorescent $F_o$. The high temperature tolerance in cucumber increased approximately $3^{\circ}C$ by the hydrogen peroxide treatments under this experiment conditions.

• Journal of Microbiology and Biotechnology
• /
• 제31권3호
• /
• pp.419-428
• /
• 2021

To efficiently recycle GH78 thermostable rhamnosidase (TpeRha) and easily separate it from the reaction mixture and furtherly improve the enzyme properties, the magnetic particle Fe3O4-SiO2-NH2-Cellu-ZIF8 (FSNcZ8) was prepared by modifying Fe3O4-NH2 with tetraethyl silicate (TEOS), microcrystalline cellulose and zinc nitrate hexahydrate. FSNcZ8 displayed better magnetic stability and higher-temperature stability than unmodified Fe3O4-NH2 (FN), and it was used to adsorb and immobilize TpeRha from Thermotoga petrophilea 13995. As for properties, FSNcZ8-TpeRha showed optimal reaction temperature and pH of 90℃ and 5.0, while its highest activity approached 714 U/g. In addition, FSNcZ8-TpeRha had better higher-temperature stability than FN. After incubation at 80℃ for 3 h, the residual enzyme activities of FSNcZ8-TpeRha, FN-TpeRha and free enzyme were 93.5%, 63.32%, and 62.77%, respectively. The organic solvent tolerance and the monosaccharides tolerance of FSNcZ8-TpeRha, compared with free TpeRha, were greatly improved. Using naringin (1 mmol/l) as the substrate, the optimal conversion conditions were as follows: FSNcZ8-TpeRha concentration was 6 U/ml; induction temperature was 80℃; the pH was 5.5; induction time was 30 min, and the yield of products was the same as free enzyme. After repeating the reaction 10 times, the conversion of naringin remained above 80%, showing great improvement of the catalytic efficiency and repeated utilization of the immobilized α-L-rhamnosidase.

• 한국미생물·생명공학회지
• /
• 제18권5호
• /
• pp.511-516
• /
• 1990

토양으로부터 분리한 효모는 내당성, 내알콜성이 있으며 알콜발효능이 우수한 균주를 분리하여 Saccharomyces cerevisiae로 동정하였다. 이 균의 특성을 살펴 본 결과 당농도가 60 배지에서도 생육이 가능한 내당성의 특징과 15(v/v) 이상의 에탄올이 함유된 배지에서는 생육할 수 없고 15(v/v) 에탄올에 2일 침적 후 알콜에 의한 알콜발효능의 저해율은 39.1 저해받았으며 8.0의 생존률을 나타내는 내알콜성특징과 2.0mM의 구리가 함유된 배지에서도 생육할 수 있는 내구리성의 특성을 갖고 있었다. 또한 분리균주의 알콜발효특성을 조사한 결과 배지 초기 pH는 4.5, 배양온도는 $30^{\circ}C$, 초기 당농도는 30일 때가 좋았으며 30 당농도의 배지를 사용하여$30^{\circ}C$ 3일 진탕배양에 의해 50.5의 발효수율이 증가한 14.0(w/v)의 알콜을 생산하였다.

• 마이크로전자및패키징학회지
• /
• 제7권1호
• /
• pp.13-18
• /
• 2000

금속기판 위에 결합된 저온 소성 세라믹(low temperature co-fired ceramics on metal, LTCC- M)은 소성 후에 x-, y- 방향으로의 수축을 1% 이하로 억제할 수 있어 수동 소자를 내장하는데 매우 유리하며, 금속 기판 전체를 접지로 사용함으로써 노이즈를 감소시킬 수 있다. 본 고에서는 내부 실장 수동 소자별 특성차에 대하여 소개하고, 이러한 내부 실장 소자를 이용하여 실제로 제작된 PAM(power amplifier module)을 소개하였다. 내장된 수동 소자는 테스트 패턴 상에서 10~20%의 변화값을 보였으며 실제 모듈에 적용하여도 목표치에 부합하는 소자 구성이 가능하였다. 수동 소자가 내부에 실장됨으로써 신호 처리 시간을 감소시킬 수 있고, 납점의 감소로 공정을 단순화시킬 수 있을 뿐만 아니라 신뢰성 또한 증가시킬 수 있으므로 향후 RF모듈 외에 파워 및 고기능 소자 등 다양한 분야에 응용이 가능할 것이다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.183-188
• /
• 2002

Co-cured composite materials has its own characteristics, so its thermal expansion is different each other. The selection of tool material for co-cured composite part in high temperature more over $350^{circ}F$ and 50 Psi pressure have to consider part thermal expansion, size, shape, and economic aspect in production line. So it is important choose tooling material in manufacturing composite parts. We called the tool for airplane composite parts as BAJ (Bonding Assembly Jig). Composite parts are cured on the BAJ in autoclave. BAJ have to stable at high temperature over $350^{circ}F$ and 50 Psi pressure, Considering composite parts' dimensional tolerance compare to heat up in autoclave. This paper come from the results of the experiment at the composite parts production line and review other aircraft company's method for tooling This is for the engineer engaged in composite parts manufacturing.