• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.107-114
• /
• 2016

Four cylindrically shaped IHXs(Intermediate Heat Exchangers) are installed in the PHTS(Primary Heat Transfer System) of the PGSFR(Prototype Gen IV Sodium cooled Fast Reactor). As for the IHX, the temperature difference of structure is inevitable result caused by heat transfer between primary coolant sodium and IHTS(Intermediate Heat Transport System) sodium. It is necessary to evaluate the high temperature structural integrity of IHXs which operate at the elevated temperature condition over the creep temperature. In this paper, the high temperature structural integrity of IHX under assumed loading conditions has been reviewed according to ASME code.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.131-140
• /
• 1993

본 연구에서는 A17075의 활성화에너지의 각 변수 의존성을 온도 보상시간과 Zener-Hollomon 개변수를 써러 조사하고 가장 신빙성이 있는 Miller에 의한 현상론적 크리프식을 조사 연구하였다.

• 한국정밀공학회지
• /
• 제2권1호
• /
• pp.53-61
• /
• 1985

This study is concerned with creep mechanism of SUS 316 under high stresses. Creep tests were conducted at temperatures between $480^{\circ} and $820^{\circ}C and stresses between 7.6 and 24.6$kg/mm^2$. To investigate the mechanism of the steady-state creep under high stresses, work hardening coefficient and activation energy are obtained. The activation energy was calculated by means of the temperature differential test together with the method of correlating the creep rates against the inverse of the absolute temperature for different stresses and strains. From the experimental results and their analyzed facts, it is concluded that the steady-state creep behavior of SUS 316 under high stresses is controlled by dislocation glide mechanism.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1075-1080
• /
• 2003

Design and fabrication process of a full inorganic electroluminescent microdislay based on aluminum / nanostructured porous silicon reverse biased light emitting Schottky diodes are discussing. Being of a solid state construction. this micro-display is cost-effective, thin and light in weight due to very simple device architecture. Its benefits include also super high resolution, wide viewing angles, fast response time and wide operating temperature range. The advantages of full integration of a LED-array and driving circuitry onto a Si-chip will be also discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.517-520
• /
• 2002

This paper has been studied Operational Amplification Circuit that has high power specification of 90 W is designed. In the input differential amplifier stage, the current source for circuit bias is designed to protect device from high voltage source. the criving state has the voltage gain more than input differential stage. With temperature compensation design, output stage works stable in different to temperature.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.969-974
• /
• 2002

Thermal characteristics according to the cooling methods are studied for the three type spindles with high frequency motor. For the analysis, three dimensional mode]s are built considering heat transfer characteristics such as natural and force convection coefficients. Unsteady-state temperature distributions and thermal deformations according to the cooling conditions are analyzed by using the finite element method.

• 보존과학연구
• /
• 통권21호
• /
• pp.145-175
• /
• 2000

To examine the method for preservation of papers, 9 kinds of papers were purchased and pretreated for 6 months with various artificial conditions which were controlled as 3 temperature classes($20^{\circ}C$, $80^{\circ}C$, $-20^{\circ}C$&$20^{\circ}C$) and 4 humidity classes(40%, 60%, 80%, 100%).Whiteness, acidity and folding endurance were measured to examine the state of papers pretreated under each condition. From the resultexamining the state, all the papers were best condition at low temperature($20^{\circ}C$) and low humidity(40%) and damaged at high temperature($80^{\circ}C$) and high humidity(100%).The values of whiteness, acidity, and folding endurance were measure din relation with deterioration of papers. According to damage of papers caused by the chemical agent, papers became to be acidic, increased color difference and reduced the force of folding endurance. The effect of change of temperature($-20^{\circ}C$&$20^{\circ}C$) on degradation of papers was not well acquired. Because the period of investigation was not long enough to acquire the data. So the more studies are needed to find the cause of damage of papers.

• 한국수산과학회지
• /
• 제30권6호
• /
• pp.974-983
• /
• 1997

The Okhotsk Sea is unique natural object with climatic peculiarities. The climate of the Okhotsk Sea results from the general distribution of solar radiation during a year, and the characteristics of the atmospheric circulation that varies through a year: In cold half year the main pressure formations are Siberian high and Aleutian low. Asian low centered on Afghanistan dominates over the Asian continent in summer. The North-Pacific sea surface is under effect of permanent North Pacific high. The changes in their position from year to year are very significant. The anticyclonic activity over the Far Eastern Seas is one of the main factors for the formation of weather anomalies over the adjacent territories. The analysis of summer weather characteristics over the coast of Okhotsk and East Sea using the data obtained from Hydrometeorological stations during $1949\~1990$ showed that, to a great extent, distribution of the air temperature depends on thermal state of the Okhotsk Sea and atmospheric circulation over it. We show some relations between weather characteristics and the intensity of atmospheric action center for the North Pacific high in summer when its ridge propagates to Okhotsk Sea. Correlation coefficients between air pressure over the Okhotsk Sea and air temperature for the coastal areas reach up to 0.7. Analysis of the spatial-temporal distribution of main meteorological values over the Okhotsk Sea such as air pressure, and air temperature are also performed.

• 설비공학논문집
• /
• 제23권12호
• /
• pp.782-790
• /
• 2011

Typical temperature control methods of a cooler for machine tools are hot-gas bypass and compressor variable speed control. The hot-gas bypass system has been widely used to control the cooler temperature in many general industrial fields. On the contrary, the compressor variable speed control is focused on special fields such as aerospace and high precision machine tools which need high precision control. The variable speed control system usually has two control variables such as target temperature and superheat. In other words, the variable speed control system is basically multi-input multi-output(MIMO) system. In spite of MIMO system, the proportional integral derivative(PID) feedback control methodology that based on single-input single-output (SISO) system is generally used for designing the variable speed control system. Therefore, it is inevitable to describe transfer functions for dynamic behaviors of every controlled variables and decide the PID gains with tremendous iteration process. Moreover, the designed PID gains do not provide optimum system performances. To solve these problems, high performance controller design method based on a state space model is suggested in this paper. An optimum controller is designed to minimize both control errors and energy inputs. This method was more simple to describe dynamic behaviors and easier to design the cooler controller which is MIMO system.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1202-1212
• /
• 2018

The effects of Nickle (Ni) addition on bainitic transformation and property of ultrahigh strength bainitic steels are investigated by three austempering processes. The results indicate that Ni addition hinders the isothermal bainite transformation kinetics, and decreases the volume fraction of bainite due to the decrease of chemical driving force for nucleation and growth of bainite transformation. Moreover, the product of tensile strength and total elongation (PSE) of high carbon bainitic steels decreases with Ni addition at higher austempering temperatures (220 and $250^{\circ}C$), while it shows no significant difference at lower austempering temperature ($200^{\circ}C$). For the same steel (Ni-free or Ni-added steel), the amounts of bainite and RA firstly increase and then decrease with the increase of the austempering temperature, resulting in the highest PSE in the sample austempered at temperature of $220^{\circ}C$. In addition, the effects of austempering time on bainite amount and property of high carbon bainitic steels are also analyzed. It indicates that in a given transformation time range of 30 h, more volume of bainite and better mechanical property in high carbon bainitic steels can be obtained by increasing the isothermal transformation time.