• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.827-829
• /
• 2016

본 논문에서는 골프 퍼팅연습 시 사용자의 편의를 도모하기 위해 고속카메라를 이용한 골프공 추적방법을 제안한다. 이것은 요즘 많은 사람들이 즐기는 레저스포츠 중 골프 퍼팅부분을 정확하게 칠 수 있도록 분석하기 위한 것이다. 제안방법은 일반 USB카메라를 사용할 경우 화소들이 뭉게져서 골프공 검출률이 낮으므로 최대 초당 380프레임까지 측정이 가능한 고속카메라를 사용하였다. 먼저 전처리 후 허프변환을 이용하여 골프공을 검출한다. 그 후 검출된 골프공의 정보를 이용하여 이동경로, 이동거리와 각도를 구한다. 제안한 방법을 적용한 결과 골프공의 검출률이 향상되었고 이동경로, 이동거리와 각도의 정확성도 향상되었다.

• 한국철도학회논문집
• /
• 제18권1호
• /
• pp.1-7
• /
• 2015

현재 국내 철도차량에 사용되고 있는 주요 부품의 유지와 보수를 위한 검사장비는 대부분 외국으로부터 수입하여 사용하고 있다. 특히 차륜형상 측정장비 등과 같은 일부 검사장비는 외국의 장비를 벤치 마킹하여 제작한 국산화 장비를 설치하여 사용하고 있으나, 이들 국산화 장비는 신뢰성과 성능에 많은 문제점이 발생하고 있는 실정이다. 따라서 본 연구는 철도차량 차륜의 유지 및 보수를 위한 차륜형상 측정장치의 정밀도와 신뢰도 향상을 위하여 최신의 고속 하이비젼 카메라 기술과 최적화된 영상처리 알고리즘을 적용하여 차륜형상 측정시스템을 개발하였다. 신뢰성 평가 실험결과 개발된 차륜형상 측정시스템의 신뢰도는 기존 시스템에 비하여 약 10.4%의 신뢰도 향상 효과가 있음을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제42권3호
• /
• pp.224-231
• /
• 2017

Objectives: To determine the actual revolutions per minute (rpm) values and compare the cyclic fatigue life of Reciproc (RPC, VDW GmbH), WaveOne (WO, Dentsply Maillefer), and TF Adaptive (TFA, Axis/SybronEndo) nickel-titanium (NiTi) file systems using high-speed camera. Materials and Methods: Twenty RPC R25 (25/0.08), 20 WO Primary (25/0.08), and 20 TFA ML 1 (25/0.08) files were employed in the present study. The cyclic fatigue tests were performed using a dynamic cyclic fatigue testing device, which has an artificial stainless steel canal with a $60^{\circ}$ angle of curvature and a 5-mm radius of curvature. The files were divided into 3 groups (group 1, RPC R25 [RPC]; group 2, WO Primary [WO]; group 3, TF Adaptive ML 1 [TFA]). All the instruments were rotated until fracture during the cyclic fatigue test and slow-motion videos were captured using high-speed camera. The number of cycles to failure (NCF) was calculated. The data were analyzed statistically using one-way analysis of variance (ANOVA, p < 0.05). Results: The slow-motion videos were indicated that rpm values of the RPC, WO, and TFA groups were 180, 210, and 425, respectively. RPC ($3,464.45{\pm}487.58$) and WO ($3,257.63{\pm}556.39$) groups had significantly longer cyclic fatigue life compared with TFA ($1,634.46{\pm}300.03$) group (p < 0.05). There was no significant difference in the mean length of the fractured fragments. Conclusions: Within the limitation of the present study, RPC and WO NiTi files showed significantly longer cyclic fatigue life than TFA NiTi file.

• 디지털융복합연구
• /
• 제12권8호
• /
• pp.295-302
• /
• 2014

3차원 공간정보를 구축하기 위해서는 고정밀의 3차원 점군데이터를 취득할 수 있는 레이저스캐닝 기술과 고해상도의 다중분광 영상정보를 취득할 수 있는 사진측량용 카메라의 활용은 필수이다. 그러나 사진측량용 카메라는 장비특성상 높은 구입비와 어려운 구입경로, 낮은 적용성으로 폭넓은 활용분야에 비해 활용성이 떨어진다. 따라서 일반사용자가 빠르고 간편하게 접근할 수 있는 디지털카메라를 이용하여 다차원 정사영상을 구축하는 기법을 연구하였다. 즉 3차원공간정보의 핵심자료인 3차원 다중분광영상정보를 구축하기 위해 디지털카메라를 개조하고 캘리브레이션 작업을 수행하였다. 스테레오 사진측량을 위한 기준점 측량과 관측대상에 대한 다중분광촬영, 정사영상으로의 변환 등을 거쳐 다차원 정사영상을 구축하였다.

• 전기학회논문지
• /
• 제66권4호
• /
• pp.727-732
• /
• 2017

This paper describes the dynamic characteristics depending on installation condition between a pantograph and an OCL (Overhead Contact Line) on a new high speed line in Korea. The current collection performance between the pantograph and the OCL was tested during train operation from Suseo to Jije stations. The current collection performance is evaluated based on the duration of an arc by using an arcing measurement system. The system consists of an optical sensor for measuring the duration of an arc and a camera for monitoring current collection performance. An arcing duration is defined as a percentage of arcing in international standards. This test aims to analyze the locations of repetitive arcing depending on installation conditions of OCLs on a new high speed line in order to use the result as reference data for correct construction and maintenance.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.21-28
• /
• 2000

Although commercial PIV systems have been widely used for the non-intrusive velocity field measurement of fluid flows, they are still under development and have considerable room for improvement. In this study, a single-frame double-exposure PIV system using a high-resolution CCD camera was developed. A pulsed Nd:Yag laser and high-resolution CCD camera were synchronized by a home-made control circuit. In order to resolve the directional ambiguity problem encountered in the single-frame PIV technique, the second particle image was genuinely shifted in the CCD sensor array during the time interval dt. The velocity vector field was determined by calculating the displacement vector at each interrogation window using cross-correlation with 50% overlapping. In order to check the effect of spatial resolution of CCD camera on the accuracy of PIV velocity field measurement, the developed PIV system with three different resolution modes of the CCD camera (512 ${\times}$ 512, lK ${\times}$ IK, 2K ${\times}$ 2K) was applied to a turbulent flow which simulate the Zn plating process of a steel strip. The experimental model consists of a snout and a moving belt. Aluminum flakes about $1{\mu}m$ diameter were used as scattering particles for the liquid flow in the zinc pot and the gas flow above the zinc surface was seeded with atomized olive oil with an average diameter of 1-$3{\mu}m$. Velocity field measurements were carried out at the strip speed $V_s$=1.0 m/s. The 2K ${\times}$ 2K high-resolution PIV technique was significantly superior compared to the smaller pixel resolution PIV system. For the cases of 512 ${\times}$ 512 and 1K ${\times}$ 1K pixel resolution PIV system, it was difficult to get accurate flow structure of viscous flow near the wall and small vortex structure in the region of large velocity gradient.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.118.5-118
• /
• 2001

This paper describes an image processing method for inspecting the surface outlook of high speed moving plates. Noise free image and a new real time processing methods are required to inspect the surface outlook of the high speed moving plates in real time. It is difficult to get a noise free image due to a signal noise, a light noise and background image in typical industrial factory. Thus, pre-processing techniques should be required to get a good image and produce so many time steps to proceed the image data. The objective of this research is to get image on the surface of the moving plates with a speed of 1m/sec and to detect some defaults on the surface image. So, the pre-processing techniques ...

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.392-395
• /
• 2006

This paper presents the experimental results at slamming phenomenon. The air pressure cylinder was used to ensure repeatability of the impact. The results showed that the adopted experimental technique was very excellent in terms of repeatability when is compared to that of the free drop tests. The pressure time histories, magnitude of peak pressure and the behavior of jet spray were obtained. The flat specimen was tested for various incident angles. To estimate the incident speed of the specimen high speed camera was used. The high speed camera was also useful tool in understanding the behavior.

• 한국가시화정보학회지
• /
• 제3권1호
• /
• pp.71-77
• /
• 2005

Information on temporal evolution of whole velocity fields are essential for physical understanding of a complicated turbulent flow. Due to advances of high-speed imaging technique, laser and electronics, high-speed digital cameras and high-repetition pulse lasers are commercially available in nowadays. A dynamic PIV system that can measure consecutive instantaneous velocity field with 1K$\times$ 1K pixels resolution at 1 fps was developed. It consists of a high-speed CMOS camera and a high-repetition Nd:YLF pulse laser. Theoretically, it can capture velocity fields at 20 fps with a reduced spatial resolution. In order to validate its performance, the dynamic PIV system was applied to a turbulent jet of which Reynolds number is about 3000. The particle images of 1024$\times$512 pixels were captured at a sampling rate of 4 KHz. The dynamic PIV system measured successfully the temporal evolution of instantaneous velocity fields of the turbulent jet, from which spectral analysis of turbulent structure was also feasible.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1996년도 특별강연 및 춘계학술발표 개요집
• /
• pp.13-14
• /
• 1996

High Frequency Electric Resistance Welding process has been widely used in manufacturing welded steel pipes because of its high welding speed and quality. This process utilizes the skin effect as well as the proximity effect of the high frequency current in heating the skelp edge. In this study, an analytical solution of the edge temperature was obtained based on several assumptions. The assumptions includes the expontial decay of weldingcurrent from the surface and neglect of the heat loss in the welding direction. This calculation shows a good agreement with the observations made from the high speed camera. Using tile analytical model, tile heat required as a function of the welding speed and the skelp thickness was determined. These results were compared with the experimental results obtained.