• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.5
• /
• pp.42-49
• /
• 2015

In this study, the multi-disk of a high-pressure drop control valve is designed and manufactured. Then, the flow rate and high-pressure drop of fluids flowing in the high-pressure drop control valve is CAE/CFD. This study involves numerical analysis for the Zambil offshore project of a high-pressure drop control valve. ANSYS used a solver for offshore structures analysis. A high-pressure drop control valve, which transforms the power transfer of a system by reducing the inlet pressure of 345bar to the outlet pressure of 112bar, is a fundamental component in the offshore process. This study not only analyzes the relation between pressure drop and fluid velocity in a trim by using fluid analysis, but also examines the possibility of cavitation in a valve in addition to the plot for the extension of lifespan. It is demonstrated that the pressure drop from 345bar to 112bar is more feasible in the presence of the trim, which can induce a continuous and diminutive pressure drop in order to prevent cavitation in a high-pressure drop control valve.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.991-996
• /
• 1995

Effects of high hydrostatic pressure on microorganisms and browning enzymes in Angelica keiskei juice were investigated using response surface methodology. The optimum process condition for maximum reduction of total aerobes was $5700\;kg_f/cm^2$ (558.6 MPa) pressure and 7.16 min process time, and 3.44 log cycle reduction of total aerobes was predicted at the optimum condition. E. coli, initially $8.8{\times}10^3\;CFU/ml$, was completely inactivated by high hydrostatic pressure at all process conditions ($3800{\sim}6700\;kg_f/cm^2\;pressure;\;3{\sim}17\;min\;process\;time$). Polyphenol oxidase and peroxidase were partly inactivated by the high hydrostatic pressure. It was also indicated that inactivation of microorganisms and browning enzymes by hydrostatic pressure is dependent on pressure rather than process time.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.790-796
• /
• 2012

Chip curling occurred during cutting process for difficult-to-cut material detracts product qualities and productivity. Among of method preventing the phenomenon, high pressure injecting cutting oil is an alterative. In this study, the optimal nozzle was designed by CFD method and it was conducted to analyse on the effect of high pressure injection on chip shape generated during cutting process and wear of insert by experimental method. As the result, it could be confirmed that high pressure injection is favorable for preventing chip curling and insert from wearing.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.4
• /
• pp.270-276
• /
• 2012

This study was performed to enhance contents of low molecular weight ginsenoside Rh2 and Rg3 using an ultra high pressure and steaming process in wild cultured-Root in wild ginseng. For selective increase in contents of Rg3 and Rh2 in cultured wild ginseng roots, an ultra high extraction was applied at 500MPa for 20 min which was followed by steaming process at $90^{\circ}C$ for 12 hr. It was revealed that contents of ginsenosides, Rb1, Rb2, Rc and Rd, were decreased with the complex process described above, whereas contents of ginsenoside Rh2 and Rg3 were increased up to 4.918 mg/g and 6.115 mg/g, respectively. In addition, concentration of benzo[${\alpha}$]pyrene in extracts of the cultured wild ginseng roots treated by the complex process was 0.64 ppm but it was 0.78 ppm when it was treated with the steaming process. From the results, it was strongly suggested that low molecular weight ginsenosides, Rh2 and Rg3, are converted from Rb1, Rb2, Rc, and Rd which are easily broken down by an ultra high pressure and steaming process. This results indicate that an ultra high pressure and steaming process can selectively increase in contents of Rg3 and Rh2 in cultured wild ginseng roots and this process might enhance the utilization and values of cultured wild ginseng roots.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.90-96
• /
• 2009

Injection molding process is one of the most important methods to produce plastic parts with high efficiency and low cost. Today, injection molded parts have been increased dramatically the demand for high strength and quality applications. This report investigates that the optimum injection molding condition for minimum of shrinkage. Molding shrinkage is occurred by several reasons such as thermal shrinkage, a hardening process and compressibility. This report concentrate on shrinkage by a hardening process. As Change a holding pressure and holding time, checked deflections of X, Y, Z directions by shrinkage based on same condition. In conclusion, it was found that holding pressure is stronger and holding time is longer, the deflection by shrinkage is smaller because injection molding needs enough time for cooling and high density. The FEM Simulation CAE tool. Moldflow, is used for the analysis of injection molding process.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.83-88
• /
• 2019

In this study, the high-temperature high-pressure vessel was successfully manufactured, which can be used to store pressurized air and to increase the temperature for the mix performance test of high-temperature high-pressure air with coolant (e.g., water). In this research, static structure analysis and transient thermal analysis were performed using the commercial software Midas NFX 2015 R1. Based on the results, the optimized pressure vessel design was carried out. As a result of the optimized design, the minimum stress and minimum weight were found at 120 mm of the vessel thickness, and the optimized pressure vessel was verified. Finally, through manufacture and performance test (e.g., the non-destructive inspection and hydraulic pressure test), the reliability and safety were validated for the designed pressure vessel.

• The Research Journal of the Costume Culture
• /
• v.21 no.1
• /
• pp.117-128
• /
• 2013

Studies show that time pressure affects the purchase decision-making process of consumers. However, in the case of apparel shopping, few studies have looked into the influence of time pressure on the purchase decision-making process. This study aims to determine how perceived time pressure in apparel shopping, time pressure situations, and product type and the interactions between these variables influence the clothing purchase process. An empirical study was conducted among males and females in their 20s and 30s. Perceived time pressure in apparel shopping was measured using four items. Time pressure situations and product types were given in the form of scenarios. A $2{\times}2{\times}2$ experimental design was used, and perceived time pressure in apparel shopping, time pressure situations, and product type were used to create eight different situations. The dependent variables included decision-making speed, anticipated regret, and anticipated purchase satisfaction. Data from 512 subjects were collected through an online data collection. Results showed that the high perceived time pressure group and the shopping situation with time pressure involved a significantly high level of decision-making time, anticipated regret, and anticipated purchase satisfaction. Marketers must understand the real-time pressure situations of consumers.

• Korean Journal of Pharmacognosy
• /
• v.44 no.1
• /
• pp.41-46
• /
• 2013

Alzheimer's disease (AD), most common form of dementia is characterized that memory deficit and loss of cognitive function. The Codonopsis lanceolata (C.lanceolata) was treated by high hydrostatic pressure process and fermentation. This study was evaluated cognitive enhancing effect C.lanceolata extract by high hydrostatic pressure process and fermentation and compared with common C.lanceolata extract using Morris water maze and passive avoidance test. And their neuroprotective effect on glutamate induced oxidative stress in HT22 cell was investigated by MTT assay. High hydrostatic pressure process and fermented C.lanceolata extract (HFCE) and common C.lanceolata extract (CCE) (100 and 300 mg/kg) were administered to mice. Results showed HFCE enhanced cognitive function than CCE as shown by decrease in escape latency time. HFCE increased the latency time of the passive avoidance test compared to CCE. Furthermore, HFCE showed significant neuroprotective effect against glutamate cytotoxicity in HT22 cells. These results indicate that high hydrostatic pressure process and fermented more improve spatial cognitive ability of C. laanceolata.

• Journal of Power System Engineering
• /
• v.21 no.3
• /
• pp.12-18
• /
• 2017

Diesel and gasoline engines will be used as main power system of automobiles. Recently, engine downsizing is widely applied to both gasoline and diesel engines in order to improve fuel economy and exhaust emissions. Engine downsizing means small engine combustion chamber with higher combustion pressure. Therefore, spray and combustion process should be investigated under these high pressure and temperature conditions. In this study, constant volume combustion chamber which enables easy optical access from six directions was developed. Combustion chamber was designed to resist maximum pressure of 15 MPa and maximum temperature of 2,000 K. Combustible pre-mixed mixture was introduced into combustion chamber and ignited by spark plugs. High pressure and temperature were implemented by combustion of pre-mixed mixture. Three initial conditions of different pressure and density were tested. High repeatability of combustion process was implemented which was proven by low standard deviation of combustion pressure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.338-344
• /
• 2016

The study is actively being performed to increase fuel injection pressure of common rail system among countermeasures to meet the emission regulation strengthen of the Diesel engine. The common rail fuel injection tube in such ultra high pressure common rail system has the weakest structural characteristics against vibration that is generated by fuel injection pressure and pulsation during engine operation and driving. Thus the extreme durability is required for common rail fuel injection tube, and the drawing process is being magnified as the most important technical fact for strength of seamless pipe that is the raw material of common rail tube. In this respect, we analyzed the characteristic of dimension and stress variation of the ultra high pressure common rail fuel injection tube by variation of Die and Plug angle in drawing process. Based on the analysis, we tried to obtain the raw material strength of common rail fuel injection tube for applying to the ultra high pressure common rail system. As a result, Plug angle is more important than entry angle of Die and we could obtain the target dimension and strength of the ultra high pressure common rail fuel injection tube through optimization of Plug angle.