• 한국안전학회지
• /
• 제27권5호
• /
• pp.126-134
• /
• 2012

The purpose of this study is to investigate waterproofing performance of self adhesive sheet combined polymer resin and poly-iso butylene. For the performance estimation of external waterproofing of concrete underground structures, there can be required various properties such as adhesion strength, hair crack resistance, repeat low and high temperature test, and so on. In this study, there engineering properties of composite system using polymer resin and poly-iso butylene were examined and could be confirmed to satisfy the guidelines of KS. Especially, it was turn out that the adhesion properties was excellent and high crack-resistance up to 1.49mm will be perform.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.62-62
• /
• 2006

Based on the redox couples of a nitroxide radical, organic radical polymers were utilized as the electrode-active or charge-storage component for a secondary battery. We call a battery composed of the radical polymer electrode as "organic radical battery". Organic radical battery has several advantages: high capacity, high power-rate performance, long cycle ability, and environmentally-benign features. Synthesis and electrochemical studies of nitroxide polymers are described. Battery fabrication and cell performance are also reported.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.179-180
• /
• 2023

The adhesion performance of PCCs for crack repair of RC structures was greater in the case of using ultra high-early strength cement than in the case of using ordinary Portland cement, and the effect of mixing silica fume was higher in the case of ordinary Portland cement than that of ultra high-early strength cement. On the other hand, 130% of W/C was more fluid than 80% of W/C in the same P/C 80%, which increased the fillability and improved the strength, but the strength improvement effect was the greatest in adhesion in flexure. Through this study, the basic characteristics of the adhesion performance of PCCs were identified, and based on this, it is necessary to induce an optimal mixing design that can increase adhesion performance through various mixing designs.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.17.2-17.2
• /
• 2010

Printed electronics is an emerging technology to realize various microelectronic devices via a cost-effective method. Here we demonstrated a high performance of p-channel and n-channel top-gate/bottom contact polymer field-effect transistors (FETs), and applications to elementary organic complementary inverter and ring oscillator circuits by inkjet processing. We could obtained high field-effect mobility more than $0.4\;cm^2/Vs$ for both of p-channel and n-channel FETs, and successfully measured inkjet-printed polymer inverters. The performance of devices highly depends on the selection of dielectrics, printing condition and device architecture. Optimized CMOS ring oscillators with p-type and n-type polymer transistors showed as high as 50 kHz operation frequency. This research was financially supported by development of next generation RFID technology for item level applications (2008-F052-01) funded by the ministry of knowledge economy (MKE).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.179-183
• /
• 2005

In apply roof waterproof system using of synthetic high polymer sheet for rooftop measure physical performance (tension$\cdot$tearing ability, temperature relativity, heating stretch performance, junction performance, wind resistance test) by various test environment condition waterproof test of structure and performance of construction work aspect, present suitable form of construction work under these environment. Also, wish to improve durability of concrete structure as that examine in priority about adhesion method and joint junction method with waterproof out surface, and present new direction about roof system application of waterproofing method for rooftop.

• Korea-Australia Rheology Journal
• /
• 제18권3호
• /
• pp.143-151
• /
• 2006

We analyzed the non-Newtonian and non-isothermal flow in a single screw extruder system and investigated the mixing performance with respect to the screw speed and the screw pitch. The viscosity of polymer melt was described with Carreau-Yasuda model. The mixing performance was computed numerically by tracking the motions of particles in the screw element system. The extent of mixing was characterized in terms of the deformation rate, the residence time distribution, and the strain. The results revealed that the high screw speed reduces the residence time but increases the deformation rate while the small screw pitch increases the residence time. It is concluded that the high screw speed increases the dispersive mixing performance and the small screw pitch increases the distributive mixing performance.

• 한국고분자학회지:고분자과학과기술
• /
• 제10권1호
• /
• pp.55-64
• /
• 1999

• 한국고분자학회지:고분자과학과기술
• /
• 제6권5호
• /
• pp.459-469
• /
• 1995

• 한국고분자학회지:고분자과학과기술
• /
• 제26권3호
• /
• pp.226-231
• /
• 2015

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.159-160
• /
• 2006

We developed novel catalyst, PHENICS composed of the combination of a cyclopentadienyl group to perform a high catalytic activity and a bulky phenoxy group, which performs the production of high molecular weight polyolefin. The polymerization activity of PHENICS at high temperature is higher than well-known CGC catalyst. PHENICS showed the excellent ability of comonomer incorporation into polymer chain. The obtained copolymer had a high molecular weight. The PHENICS catalyst is also active to the copolymerization of ethylene and several vinyl comonomers such as styrene, norbornen, and conjugated dienes. We will discuss new cocatalysts for PHENICS to improve activity and the ability of molecular weight control.