• Journal of Korean society of Dental Hygiene
• /
• v.11 no.1
• /
• pp.29-38
• /
• 2011

Objectives : The purpose of this study was to survey the awareness of methicillin -resistant Staphylococcus aureus(MRSA) among dental hygiene students in Yeungnam South Korea. Also the knowledge of infection control and infection diseases was surveyed. Methods : The subjects in this study were 213 dental hygiene students in three different colleges in Yeungnam. This study was conducted by using the self-reported questionnaire. Results : In the first, most of the students(86.9%) did not know about MRSA and 85.7% of them got the information in the college. Secondly, the awareness of infectious disease according to infection control education didn't have statistically significant difference(p>0.05). In the third, the infection control attitude level that the gowns should be changed after the treatment of infectious patients was scored lower than the others questions. on the other hand, the level of 'The use of high vacuum suction', 'The change of wet mask', 'The history taking of infectious disease' was scored higher. Finally, the attitude level according to grade and clinical training had statistically significant difference(p<0.05). But the infection control education had not affected significantly(p>0.05). Conclusions : Despite the infection control education and clinical training, the awareness was found insufficient in infectious diseases and MRSA. Therefore, it should be strengthen that the dental hygiene students were more educated about infection control at college course before clinical training, and especially the danger of MRSA was more.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 1998.06a
• /
• pp.50-69
• /
• 1998

Dimethomorph is a novel fungicide with a high level of activity against diseases induced by certain Oomycetes, including fungal populations that are resistant to other products. In several ways, this fungicide illustrates the opportunities and challenges presented by many modern pesticides. The specific mode of action, which affects cell wall formation, is associated with a very high level of performance and low dose rates under field conditions. These low dose rates, combined with a low level of toxicity to non-target organisms present an outstanding safety profile. This same highly-specific mode of action, however, limits the spectrum of activity and suggests the need for a resistance management plan, both of which must be addressed in new product development. In addition, the biological and physiochemical properties of this, and other new products are not adequately described by the traditional classification of fungicides into“protectant”and“systemic”types. These unique profiles provide novel and useful products for disease control.

• Journal of Plant Biotechnology
• /
• v.42 no.1
• /
• pp.25-33
• /
• 2015

A PyrcpPR-10 gene with differentially expressed was isolated by using the suppression subtractive hybridization assay between '93-3-98' (highly resistant against scab caused by Venturia nashicola) and 'Sweat Skin'(highly susceptible) and analyzed the expression pattern according to organs and cultivars. The full length of PyrcpPR-10 was cloned as 743bp with 480bp's ORP, and was determined to encode a protein of 159 amino acid residues. On analyzing PyrcpPR-10 gene sequence compared with resistant and susceptible cultivars, 'Hwangsilri' (resistant), 'Gamcheonbae' (moderately resistant), 'Wonhwang' (moderately susceptible), 'Niitaka' (highly susceptible), and 'Sweat Skin' (highly susceptible) had identical gene sequence but 'Bartlett' (highly resistant) showed partly different sequences. The deduced amino acid sequence showed 64 ~ 98% homology and had the GXGGXG motif to known amino acid of other plants PR-10 by the BLAST X analysis. Among several organs or tissues, petal was showed highest expression level of PyrcpPR-10 gene followed by leaf, floral axis, bud, and bark. The expression level of PyrcpPR-10 gene was dramatically increased at 24 hr after inoculation in all cultivars and also up-regulated in accordance with resistant degree of cultivars. While resistant cultivars ('Bartlett', '93-3-98', and 'Hwangsilri') induced relatively high expression level of PyrcpPR-10 gene, susceptible cultivars ('Niitaka', and 'Sweat Skin') showed low expression level. PyrcpPR-10 gene is assumed that it is directly connected with defense mechanisms to pear scab.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.11
• /
• pp.5463-5467
• /
• 2012

Hepatitis B virus (HBV) infection is contagious with transmissiobn vertically or horizontally by blood products and body secretions. Over 50% of Iranian carriers contracted the infection prenatally, making this the most likely route of transmission of HBV in Iran. To evaluate the resistance to adefovir (ADV) therapy in patients with chronic hepatitis B infection, a study was conducted on 70 patients (63 males and 7 females), who had received in first line lamivudine and second line adefovir. All were tested for the presence of hepatitis B surface antigen (HBsAg), hepatitis B envelope antigen (HBeAg), serum alanine amino transferase (ALT) level and HBV DNA load before and after treatment with ADV. In all samples, resistance to lamivudine and ADV was tested with real time PCR. Among seventy patients with chronic hepatitis B infection, 18 (25.7%) were resistant to LAM and 8 (11.4%) were resistant to ADV. Only one patient was negative for the presence of HBS-Ag (5.6%) and two were negative for HBe-Ag (11.1%). In this study we used a new method (ALLGIO probe assay) that has high sensitivity in detection of adefovir resistance mutants, which we recommend to other researchers. Mutant strains of the YMDD motif of HBV polymerase can be found in some patients under treatment with lamivudine and ADV. ADV has been demonstrated to be efficient in patients with lamivudine resistant HBV.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.202-204
• /
• 2009

Erosion is a common failure mode of materials frequently encountered in plant and power industry. Although the erosion resistance of Fe-base alloy has been inferior to the other expensive materials, it is expected that the strain-induced martensitic transformation can impart high erosion resistance to Fe-base alloy. The key technology to develop Fe-base metal cored welding wire for erosion resistant overlay welding may include the strain-induced metallurgy for hardening rate control and the welding flux metallurgy for dilution control. Sophisticated studies showed that the strain-induced martensitic transformation behavior was related to the critical strain energy which was dependent on the alloy composition. Dilution and bead shape of overlay weld were proved to be affected by metal transfer mode during gas tungsten arc welding and elements in welding fluxes. It was considered that the highly erosion resistant Fe-base overlay weld could be achieved by precise control of alloy composition to have proper level of critical strain energy for energy absorption and welding flux formulation to have small amount of deoxidizing metallic elements for dilution.

• Archives of Pharmacal Research
• /
• v.21 no.3
• /
• pp.344-347
• /
• 1998

To overcome multidrug resistance (MDR) in cancer chemotherapy, we prepared various plant extracts and searched for a component which is effective for inhibition of MDR. MDR inhibition activity was determined by measuring cytotoxicity to MDR cells using multidrug resistant human fibrocarcinoma KB V20C, which is resistant to 20 nM vincristine and expresses high level of mdr1 gene. Of various plant extracts, the MeOH extract of the root of Aconitum pseudo-laeve var. erectum was found to have potent inhibitory activity on MDR. The bioassayguided fractionation of the MeOH extract of the plant led to the isolation of an alkaloid, lycaconitine, as an active principle. And the $IC_{50}$ of lycaconitne for KB V20C cells was $74\mu{g}$/ml.

• Journal of Plant Biotechnology
• /
• v.7 no.3
• /
• pp.143-148
• /
• 2005

The coat protein mediated resistance to potato virus Y is assessed here in transgenic potato plants (Solanum tuberosum L., cv Claustar). Therefore, the corresponding cDNA from tunisian isolate of the virus was cloned into Agrobacterium tumefaciens binary vector. The transgenic lines were subsequently analysed for the presence and expression of the transgene. The CP cDNA copy number was determined for kanamycin resistant plants. Three selected transgenic lines and their S1 progeny resulting from tuber germination showed a high protection level against the virus. These data appear to support the hypothesis that the virus resistance is mediated by the translated viral coat protein expressed in transgenic potato lines.

• Archives of Pharmacal Research
• /
• v.19 no.3
• /
• pp.213-218
• /
• 1996

Multidrug resistance (MDR) has been a major problem in cancer chemotherapy. To overcome this problem, we prepared minor ginsenosides stereoselectively from ginseng saponins and searched for a ginseng component which is effective for inhibition of MDR. MDR inhibition activity was determined by measuring cytotoxicity to MDR cells using multidrug resistant human fibrocarcinoma KB V20C, which is resistant to 20 nM vincristine and expresses high level of mdr1 gene. Of several ginseng components, 20(S)-ginsenoside Rg_3$, a red ginseng saponin, was found to have the most potent inhibitory activity on MDR and it's concentration capable of inhibiting 50% growth was $82\muM$.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.7
• /
• pp.1007-1014
• /
• 2015

Plectasin, the first defensin extracted from a fungus (the saprophytic ascomycete Pseudoplectania nigrella), is attractive as a prospective antimicrobial agent. The purpose of this study was to establish a bacterium-based production system and evaluate the antimicrobial activity of the resulting plectasin. A gene encoding plectasin, with the codon preference of Escherichia coli, was optimized based on its amino acid sequence, synthesized using genesplicing with overlap extension PCR, and inserted into the expression vector pGEX-4T-1. The fusion protein was expressed in the soluble fraction of E. coli and purified using glutathione Stransferase affinity chromatography. Plectasin was cleaved from the fusion protein with thrombin and purified by ultrafiltration. The purified plectasin showed strong, concentrationdependent antimicrobial activity against gram-positive bacteria, including antibiotic-resistant bacteria, especially penicillin-resistant Enterococcus faecium. This antimicrobial activity was equal to chemically synthesized plectasin and was maintained over a wide range of pH and temperatures. This soluble recombinant expression system in E. coli is effective for producing plectasin at a relatively lower cost, and higher purity and efficiency than prior systems, and might provide a foundation for developing a large-scale production system. Overall, plectasin shows potential as a novel, high-performance, and safe antibiotic for the treatment of refractory diseases caused by drug-resistant bacterial strains.

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.555-565
• /
• 2023

Despite many advantages as structural materials, austenitic stainless steels (SSs) have been avoided in many next generation nuclear systems due to poor void swelling resistance. In this paper, we report the results of heavy ion irradiation to the recently developed advanced radiation resistant austenitic SS (ARES-6P) with nanosized NbC precipitates. Heavy ion irradiation was performed at high temperatures (500 ℃ and 575 ℃) to the damage level of ~200 displacement per atom (dpa). The measured void swelling of ARES-6P was 2-3%, which was considerably less compared to commercial 316 SS and comparable to ferritic martensitic steels. In addition, increment of hardness measured by nano-indentation was much smaller for ARES-6P compared to 316 SS. Though some nanosized NbC precipitates were dissociated under relatively high dose rate (~5.0 × 10^-4 dpa/s), sufficient number of NbC precipitates remained to act as sink sites for the point defects, resulting in such superior radiation resistance.