• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.3
• /
• pp.557-565
• /
• 1997

Screw-shaped implants of commercially pure (c.p.) titanium, c.p. niobium, c.p. zirconium, and stainless steel(Sus 304) were inserted in the rabbit tibial bone over 12 weeks of follow-up. New developed torque gauge instrument was used to evaluate the implant holding power and a image analysis program coupled to a microscope was used for histomorphometry. The three best consecutive threads of each implant were measured. Quantitative analyses at 12 weeks revealed a partial bone contact to the four kinds investigated metals. There were no obvious adverse tissue reactions to any of the biomaterials. At 12 weeks the average removal torques for titanium, niobium and zirconium were better than that needed for Sus 304 screws, on the other hand high score of bony contact ratio of titanium and niobium were showed in comparison to those of zirconium and Sus 304. There was no significant differences in the amount of interfacial bone of zirconium and Sus 304 whereas there was significant difference in the torque forces of niobium and Sus 304. Three months after implant insertion, the average removal torque was 6.64 Ncm for the titanium, 6.57 Ncm for the niobium, 6.38 Ncm for the zirconium, and 4.25 Ncm for the Sus 304. On average bone contacts there were 51.24% in the titanium, 48.19% in the niobium, 31.79% in the zirconium, 23.54% in the Sus 304. Biocompatibility of the titanium, niobium and zirconium was acceptable level in comparison to the Sus 304.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.3
• /
• pp.89-100
• /
• 2007

In the companion paper, we provided the novel elastic-plastic constitutive model based on the micromechanics theory. Herein, the elastic and elastic-plastic deformation of granular soils is meticulously analyzed. To guarantee high accuracy of the microscopic parameter, the systematic procedure to evaluate the parameters is provided. The analysis of the elastic response during the isotropic and triaxial compression shows that the stress-level dependency of cross-anisotropic elastic moduli is induced by the power relationship of the contact force in the normal contact stiffness, while the evolution of fabric anisotropy is more pronounced during triaxial compression. The micromechanical analysis indicates that the plastic strains are likely to occur at very small strains. The plastic deformation of tangential contacts has an important role in the reduction of soil stiffness during axial loading.

• Journal of Distribution Science
• /
• v.11 no.8
• /
• pp.25-30
• /
• 2013

Purpose - Foodservices have grown to over 60% of the franchise industry. However, despite reaching this high level, the foodservice franchise industry is experiencing severe ups and downs. While factors such as expansion by franchises and the entry of large multinational firms are causing this imbalance, the more serious problem faced by franchisees is the lack of know-how and correct operating procedures. Franchise headquarters should advise franchisees on important matters such as food ingredients, interior design, tableware, and fixtures. However, even though franchise headquarters have the ability to impart such management know-how, this is often a neglected area. Research design, data and methodology - This study was conducted in an industrial environment to present suitable competitive alternatives for foodservice franchises. Empirical analysis was conducted using a sample of 232 people with experience in targeting customers. The main purpose of this study is not to identify and analyze the factors affecting customer satisfaction. Customers of the Food Service Industry to invite contacts until departure for the service flow by identifying the expectations and allow this area by analyzing the resulting measures to enhance the competitiveness has presented. Results - Actual results contact factors affecting the quality of service on customer satisfaction was a significant influence. However, the end of this analysis, the actual customer satisfaction directly affects the quality of service that is only important factor can commit mistakes. Relatively large impact on customer satisfaction, which is relatively independent of the quality factor should be a review of zone of tolerance. In this study, eating phase relative to contact the service customer satisfaction was the most influential. The results, however, zone of tolerance for an area in the waiting and ordering dissatisfaction factors are appearing. And in the course of these services outside the zone of tolerance area is unsatisfactory evaluation is being done. Conclusions - After all, Foodservice, the contact service management for zone of tolerance the top priority should be can be seen. Foodservice contact first in the case of service quality factors caused by the continuous flow of services, so this step-by-step identification needs to be clearer. This, of course, to distinguish between the actual per unit of activity appears to be more difficult to follow, for it seems to need a lot of future complementary. Next is the assessment of customer service quality. Customers remember the experience for the services of a real contact through the assessment and service evaluation clearly emerge as the expected level can be difficult. However, this situation is controlled by the test method cannot be avoided unless there is no limit to the number of leave. Despite these limitations, the next step to contact a service evaluation and analysis have to continue to refine and thereby franchisees for the operation of the store in terms of practical know-how required to provide to the office believe.

• Journal of Environmental Policy
• /
• v.8 no.4
• /
• pp.75-94
• /
• 2009

The process of obtaining third-party financing contacts was analyzed via a two-stage game model: a "signaling game" for the first stage,and a "principal-agent model" for the second stage. The two-stage game was solved by a process of backward induction. In the second stage game, the optimal effort level of the energy saving company (ESCO), the optimal compensation scheme of the energy user, and the optimal payoffs for both parties were derived for each subgame. The optimal solutions forthe different subgames were then compared with each other. Our main finding was that if there is some restriction on ESCO's revenue (e.g. a progressive sales tax) that causes ESCO's revenue toincrease at a decreasing rate, then the optimal sharing ratio is uniquely determined at a level of strictly less than one under a linear compensation scheme, i.e. a unique balance exists. Subgames have a unique equilibrium arrived at separately for each situation,. Within this equilibrium, energy users accept energy audit proposals from H-type ESCOs with high levels of technology, but reject proposals from L-type ESCOs with low levels of technology. While L-type ESCOs cannot attain profits in the third-party financing market, H-type ESCOS can pocket the price differential between L-type and H-type audit fees. Accordingly, revenues in an H-type ESCO equilibrium increase not only in line with the technology of the ESCO inquestion, but also faster than in an L-type equilibrium due to more advanced technology. At the same time, energy users receive some positive payoff by allowing ESCOs to perform third-party financing tasks within their existing energy system without incurring any extra costs.

• Nuclear Engineering and Technology
• /
• v.45 no.4
• /
• pp.513-522
• /
• 2013

The ODSCC detected in the TSP position of Ulchin 3&4 SGs are typical ODSCC of Alloy 600MA tubes. The causative chemical environment is formed by concentration of impurities inside the occluded region formed by the tube surface, egg crate strips, and sludge deposit there. Most cracks are detected at or near the line contacts between the tube surface and the egg crate strips. The region of dense crack population, as defined as between $4^{th}$ and $9^{th}$ TSPs, and near the center of hot leg hemisphere plane, coincided well with the region of preferential sludge deposition as defined by thermal hydraulics calculation using SGAP computer code. The cracks developed homogeneously in a wide range of SGs, so that the number of cracks detected each outage increased very rapidly since the first detection in the $8^{th}$ refueling outage. The root cause assessment focused on investigation of the difference in microstructure and manufacturing residual stress in order to reveal the cause of different susceptibilities to ODSCC among identical six units. The manufacturing residual stress as measured by XRD on OD surface and by split tube method indicated that the high residual stress of Alloy 600MA tube played a critical role in developing ODSCC. The level of residual stress showed substantial variations among the six units depending on details of straightening and OD grinding processes. Youngwang 3&4 tubes are less susceptible to ODSCC than U3 and U4 tubes because semi-continuous coarse chromium carbides are formed along the grain boundary of Y3&4 tubes, while there are finer less continuous chromium carbides in U3 and U4. The different carbide morphology is caused by the difference in cooling rate after mill anneal. There is a possibility that high chromium content in the Y3&4 tubes, still within the allowable range of Alloy 600, has made some contribution to the improved resistance to ODSCC. It is anticipated that ODSCC in Y5&6 SGs will be retarded more considerably than U3 SGs since the manufacturing residual stress in Y5&6 tubes is substantially lower than in U3 tubes, while the microstructure is similar with each other.

• Geomechanics and Engineering
• /
• v.17 no.4
• /
• pp.343-354
• /
• 2019

The present study demonstrates the application of seismic petrophysics and amplitude versus angle (AVA) forward modeling to identify the reservoir fluids, discriminate their saturation levels and natural gas composition. Two case studies of the Lumshiwal Formation (mainly sandstone) of the Lower Cretaceous age have been studied from the Kohat Sub-basin and the Middle Indus Basin of Pakistan. The conventional angle-dependent reflection amplitudes such as P converted P ($R_{PP}$) and S ($R_{PS}$), S converted S ($R_{SS}$) and P ($R_{SP}$) and newly developed AVA attributes (${\Delta}R_{PP}$, ${\Delta}R_{PS}$, ${\Delta}R_{SS}$ and ${\Delta}R_{SP}$) are analyzed at different gas saturation levels in the reservoir rock. These attributes are generated by taking the differences between the water wet reflection coefficient and the reflection coefficient at unknown gas saturation. Intercept (A) and gradient (B) attributes are also computed and cross-plotted at different gas compositions and gas/water scenarios to define the AVO class of reservoir sands. The numerical simulation reveals that ${\Delta}R_{PP}$, ${\Delta}R_{PS}$, ${\Delta}R_{SS}$ and ${\Delta}R_{SP}$ are good indicators and able to distinguish low and high gas saturation with a high level of confidence as compared to conventional reflection amplitudes such as P-P, P-S, S-S and S-P. In A-B cross-plots, the gas lines move towards the fluid (wet) lines as the proportion of heavier gases increase in the Lumshiwal Sands. Because of the upper contacts with different sedimentary rocks (Shale/Limestone) in both wells, the same reservoir sand exhibits different response similar to AVO classes like class I and class IV. This study will help to analyze gas sands by using amplitude based attributes as direct gas indicators in further gas drilling wells in clastic successions.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.105-115
• /
• 2006

The purpose of this study is to elucidate the mechanical characteristics of lower extremity joint movements at different walking speeds in obese people and suggest the very suitable exercise for obese person's own body weight and basic data for clinical application leading to medical treatment of obesity. This experimental subjects are all males between the ages of 20 and 30, who are classified into two groups according to Body Mass Index(BMI): one group is 15 people with normal body weight and the other 15 obese people. Walking speed is analysed at 3 different speeds ($1.5^m/s$, $1.8^m/s$, $2.1^m/s$) which is increased by $0.3^m/s$ from the standard speed of $1.5^m/s$. We calculated joint moments of lower extremity during stance phase through video recording and platform force measurement.Two-way ANOVA(Analysis of Variance, Mix) is applied to get the difference of moments according to walking speeds between normal and obese groups. Pearson's Correlation Analysis is applied to look into correlation between walking speeds and joint moments in both groups. Significance level of each experiment is set as ${\alpha}=.05$. As walking speed increases maximum ankle plantar flexion moment in the stance phase is smaller in obese group than in normal group, which is suggestive of weak toe push-off during terminal stance in obese group, and the highest maximum ankle plantar flexion moment in obese group during the middle speed walking($1.8^m/s.$). Maximum ankle dorsal flexion moment in obese group is relatively higher than in normal group and this is regarded as a kind of compensatory mechanism to decrease the impact on ankle when heel contacts the floor. Maximum knee flexion and extension moments are both higher in normal group with an increase tendency proportional to walking speed and maximum hip flexion and extension moments higher in obese group. In summary, maximum ankle plantar flexion moment between groups(p<.025), maximum knee moment not in flexion but in extension(p<.001) within each group according to increasing walking speed, and maximum hip flexion and extension moment(p<.001 and p<.004, respectively according to increasing walking speed are statistically significant but knee and hip moments between groups are not. Pearson correlation are different: high correlation coefficients in maximum knee flexion and extension moments, in maximum hip extension moment but not hip flexion, and in maximum ankle dorsal flexion moment but not ankle plantar flexion, in each group. We suspect that equilibrium imbalance develops when the subject increases walking speed and the time is around which he takes his foot off the floor.

• Journal of agricultural medicine and community health
• /
• v.13 no.1
• /
• pp.3-18
• /
• 1988

The general objective of this research is to study behavioral pattern of health care utilization and to measure the level of utilization of the traditional medicine. The specific objective is to study utilization pattern and content of folk medicine which is the indegenous medical technology recognized part of traditional medicine. This research was under taken to generate valid information that will provide basis data for formulating general direction for health education activities and for designing service package for general population. A social survey method was employed to obtain required information for the research activities, The survey field team consisted of 20 surveyors who all participated is an intensive 2 day training course. A total of 3091 households were visited and interviewed by the field team during the period 7 September to 6 October 1987. The major findings obtained from the information collected by the field survey are as follows ; 1) General characteristics of the study households 2562 households out of 3091 households visited were selected for final data process, 80.2 of the selected households were nuclear families ; 17.4%, extended families ; others 2.4%. Only 4.3 percent of the study population in the urban households indicated "no schooling" whereas 14.2% of the rural household members falls within this category. Study population in the urban areas are more protected against diseases by the national medical insurance system than those in rural areas. In their self appraisal of living standard, those who responded with low group are 39.6% and 50.3% respectively by urban and rural households. 2) Morbidity status Period prevalence rate for all diseases during the preceding 15 days before the date of the household interview v as 243,0 per 1,000 study population. For cases with the illness duration of within 15 days, the initial points of medical entry were diversied ; 56.9%, drug stores ; 30.9%, clinics and hospitals ; 4.6% folk medicine ; 1.7% clinics of Korean oriental medicine. Among the chronic case; with illness duration of over 90 days, 34.6% of these people utilized clinics and hospitals of modern medicine ; 31.6%, drug stores ; 18.6% clinics of Korean oriental medicine ; 6.8% folk medical techniques. Noticeable is the almost ten fold increase from the mere 0.9% in the utilization of Korean oriental medicine, whereas in the utilization of folk medicine, it is short of two-fold increase. 3) Folk medicine and its utilization Households that use folk medicine for relief and care of signs and symptoms commonly encountered in daily life, number 1969 households, which accounts for 76.9% of all the study households. This rather high level use of folk medicine is not different from rural to urban areas. The order of frequency of utilizing folk medicine among the study people are : the highest 14.3% for the relief of indigestion ; 8.6% for burns ; 5.1% for common cold ; 4.7% for hiccough ; and 4.2% for hordeolum. A present various procedures of folk medicine is being used to relieve all kinds of symptoms. 192 symptoms are identified at present. The most frequently used procedures of folk medicine appear to be based either on principles of the Korean oriental medicine or of scientific knowledge. Based on these survey findings, proposals for utilizing folk medicine are as follows First, this survey's findings will be feed back to both on the job training and on the spot guidance of community health practitioners, public health nurses and other peripheral work force in the health field, who are in daily contacts with community. This feed back will assure that the health personnel carry out their health education and information activities that are based on the utilization pattern of folk medicine as found in the survey result. Second, studies will be soon implemented that are designed to measure the efficiency and potency of these procedures and to improve these procedures of folk medicine were most frequently used by the community. Third, studies will continue to systematize medicinal plants and skills of Korean oriental medicine that are easily available at minimal cost in daily life for the prevention of diseases and management of emergency cases.

• Economic and Environmental Geology
• /
• v.12 no.3
• /
• pp.147-176
• /
• 1979

The Yeonhwa II zinc-lead mine is characterized by a dozen of moderately dipping tabular orebodies of skarn and zinc-lead sulfides, developed in accordance with the ENE-trending bedding thrusts and bedding planes of the Pungchon Limestone and underlying Myobong Formation, mostly along the contacts of a ENE-trending sill and a NW-trending dike of quartz mononite porphyry. The orebodies occur in three groups: (1) the footwall Wolgok orebodies with respect to the sill, (2) the hangingwall Wolgok orebodies, and (3) the Seongok orebodies extended from dike contacts into carbonate beds. Mineral compositions of these orebodies are dominated by calc-silicates (skarn) associated with ore minerals of sphalerite, galena, and chalcopyrite, as well as sulfide gangue of pyrrhotite. A pair of exo- and endo-skerns in the Wolgok footwall contact aureole between the Pungchon Limestone and quartz monzonite porphyry on the -120 level represents a well-developed symmetrical pattern of mineral zoning: a garnet/quartz zone in the center of exoskarn, two zones of pyroxene with ore minerals on both sides of the garnet/quartz zone, further outwards-an epidote/chlorite-bearing hornfelsic zone in the Myobong slate beyond a zone of unaffected limestone, and an epidote-dominated zone of endo skarn on the opposite side toward fresh quartz monzonite porphyry. These features indicate a combination of two effects on the skarn formation: (1) differences in composition of the host rocks(sedimentary and ignous), and (2) progressive outward migration of inner zones on outer zones on the course of metasomatic replacement of the pre-existing minerals. Microprobe analyses of garnet, pyroxene, pyroxenoids, epidote, and chlorite for nine major elements on a total of 23 mineral grains revealed that: the pyroxenes are hedenbergitic, in most zones, with a gradual decrease of Fe- and Mn-contents toward the central zone, whereas the garnets are andraditic in outer zones, but are grossularitic in the central zone. This indicates a reverse relationship of Fe-contents between pyroxene and garnet across the exoskarn zones. Pyroxenoids are lacking in wollastonite but are dominated by pyroxmangite, rhodonite and bustamite, indicating a Mn-rich nature in bulk chemistry. Pseudomorphic fluorite after garnet occurs abundantly reflecting a fluorine-enhanced evidence of the skarn-forming fluids. Epidote contains 0.19-0.25mole fraction of pistacite, and chlorite is Mn-rich but is Mg-poor. Sulfide mineralization took place with the most Fe-rich pyroxene rather than with garnet as indicated by the fact that the highest value of hedenbergite mole fraction occurs in the ore-bearing pyroxene zone. The Yeonhwa II ores are characterized by high zinc and low lead in metal grade, with minor quantity of copper content in almost constant grade. The hangingwall Wolgok and Seongok orebodies, that formed in a more open environment with respect to their local configurations of geologic setting, are more variable in metal grades and ratios, than are the footwall Wolgok orebodies formed in a more closed condition in a narrow interval of sedimentary beds.